打孔方式对细支卷烟滤嘴通风率及感官品质的影响

崔春; 楚文娟; 田海英; 高明奇; 付瑜锋; 李禄成; 鲁平

doi:10.12187/2020.04.006

CN 41-1437/TS ISSN 2096-1553

崔春 , 楚文娟 , 田海英 , 高明奇 , 付瑜锋 , 李禄成 , 鲁平

崔春, 楚文娟, 田海英, 等. 打孔方式对细支卷烟滤嘴通风率及感官品质的影响[J]. 轻工学报, 2020, 35(4): 40-45. doi: 10.12187/2020.04.006

引用本文: 崔春, 楚文娟, 田海英, 等. 打孔方式对细支卷烟滤嘴通风率及感官品质的影响[J]. 轻工学报, 2020, 35(4): 40-45. doi: 10.12187/2020.04.006

CUI Chun, CHU Wenjuan, TIAN Haiying, et al. Effects of perforation on filter ventilation rate and sensory quality of slim cigarrete[J]. Journal of Light Industry, 2020, 35(4): 40-45. doi: 10.12187/2020.04.006

Citation: CUI Chun, CHU Wenjuan, TIAN Haiying, et al. Effects of perforation on filter ventilation rate and sensory quality of slim cigarrete[J]. Journal of Light Industry, 2020, 35(4): 40-45. doi: 10.12187/2020.04.006

打孔方式对细支卷烟滤嘴通风率及感官品质的影响

河南中烟工业有限责任公司技术中心, 河南郑州 450000

作者简介: 崔春(1986-),女,河南省驻马店市人,河南中烟工业有限责任公司工程师,主要研究方向为卷烟材料.;

基金项目: 中国烟草总公司重大专项项目（110201601013（XZ-04））；河南中烟工业有限责任公司重点科技项目（ZW2016004）
中图分类号: TS452.1

Effects of perforation on filter ventilation rate and sensory quality of slim cigarrete

Technology Center, China Tobacco He'nan Industrial Co., Ltd., Zhengzhou 450000, China
Received Date: 2020-03-23

CLC number: TS452.1

摘要: 为选择合适的打孔方式以提升细支卷烟的质量水平，考察了在线激光打孔、激光预打孔、静电打孔、等离子体打孔对细支卷烟滤嘴通风率、通风率稳定性和感官品质的影响.结果表明：4种打孔方式均可满足滤嘴通风率的设计需要；对于同一接装纸透气度，采用等离子体打孔和静电打孔的细支卷烟的滤嘴通风率较高；采用等离子体打孔和在线激光打孔的细支卷烟的滤嘴通风率稳定性相对较好；等离子体打孔和在线激光打孔更有利于改善细支卷烟的感官品质，当滤嘴通风率较低时，两种打孔方式的细支卷烟感官品质相当，而当滤嘴通风率较高时，采用在线激光打孔的细支卷烟的感官品质优于等离子体打孔.综上，等离子体打孔和在线激光打孔整体优于静电打孔和激光预打孔，是细支卷烟生产中的优选打孔方式.
- 打孔方式 /
- 细支卷烟 /
- 滤嘴通风率 /
- 稳定性 /
- 感官品质
Abstract: In order to choose an appropriate perforation for improving the quality of slim cigarettes,effects of online laser,off-line laser,plasma and static electricity perforations on filter ventilation efficiency,filter ventilation rate stability and sensory quantity for slim cigarretes were investigated.The results showed that all of the four perforations could meet the design needs of filter ventilation rate.Higher filter ventilation rate could achieved of slim cigarettes perforated by plasma and static electricity when air permeability of tipping paper was fixed.Filter ventilation rate stability of slim cigarettes perforated by plasma and online laser was better comparatively.It was more beneficial for improvement of sensory quantity of slim cigarettes perforated by plasma and online laser.Sensory quantity of slim cigarettes perforated by these two ways was corresponded when the filter ventilation rate was lower,and that perforated by online laser was superior to perforated by plasma when the filter ventilation rate was higher.In conclusion,plasma and on-line laser perforations were better than static electricity and off-line laser perforations as a whole,and were the preferred punching methods in the production of slim cigarette.
- perforation /
- slim cigarette /
- filter ventilation rate /
- stability /
- sensory quantity
1. [1]
  陈欢,姜兴益,王颖,等.两种抽吸模式下卷烟烟气有害成分释放量与滤嘴通风率的关系[J].烟草科技,2015,48(9):45.
2. [2]
  谢玉龙,朱先约,蔡君兰,等.滤嘴通风对卷烟烟气酸性成分的影响[J].烟草科技,2018,51(3):30.
3. [3]
  金勇,王诗太,李克,等.接装纸打孔参数对卷烟烟气焦油及7种有害成分释放量影响的PLS回归分析[J].烟草科技,2016,49(4):37.
4. [4]
  曹伏军,解晓翠,汪旭,等.在线激光打孔参数对卷烟通风率及常规烟气成分释放量的影响[J].烟草科技,2014(11):45.
5. [5]
  段沅杏,张涛,陈进雄,等.接装纸激光、静电打孔对烟气释放量的影响[J].湖北农业科学,2012,51(23):5403.
6. [6]
7. [7]
  魏玉玲,徐金和,廖臻,等.卷烟材料多因素对卷烟通风率及过滤效率的影响[J].烟草科技,2008(11):9.
8. [8]
  高明奇,顾亮,李明哲,等.在线打孔参数对细支卷烟理化指标的影响[J].食品与机械,2017,33(11):200.
9. [9]
  冯文,廖臻,徐世涛,等.接装纸激光、静电打孔方式对卷烟烟气影响的对比研究[J].云南大学学报(自然科学版),2010,32(S1):115.
10. [10]
  刘建福,金勇,李克,等.接装纸对卷烟烟气焦油及7种有害成分的影响[J].烟草科技,2013(8):67.
11. [11]
  解晓翠.在线激光打孔卷烟通风率与卷烟理化指标的关系[J].郑州轻工业学院学报(自然科学版),2015,30(3/4):52.
12. [12]
  严志景,邵名伟,查勇,等.通风卷烟2种不同打孔方式的比较[J].湖南文理学院学报(自然科学版),2018,30(1):53.
13. [13]
  中华人民共和国国家质量监督检验检疫总局.卷烟纸、成形纸、接装纸及具有定向透气带的材料透气度的测定:GB/T 23227-2018[S].北京:中国标准出版社,2018.
14. [14]
  中华人民共和国国家质量监督检验检疫总局.卷烟和滤棒物理性能的测定第15部分:卷烟通风的测定定义和测量原理:GB/T 22838.15-2009[S].北京:中国标准出版社,2009.
15. [15]
  国家烟草专卖局.烟草在制品感官评价方法:YC/T 415-2011[S].北京:中国标准出版社,2011.
1. [1]
  王小媛 , 耿君君 , 靳学远 , 牛涵 , 王龙霞 . 基于不同杀菌方式的杜仲籽油-苹果汁复合饮料贮藏稳定性评价. 轻工学报, 2024, 0(0): -.
2. [2]
  郭华诚 , 胡仙妹 , 高尊华 , 李金周 , 王红霞 . 针辊式烟丝结构调控设备参数变化对细支烟卷制品质的影响. 轻工学报, 2024, 0(0): -.
3. [3]
  方亦成 , 杨菁 , 陆诚玮 , 冯奇 , 汪旭 . 基于层次分析法的加热卷烟感官评价指标筛选及其权重建立. 轻工学报, 2024, 0(0): -.
4. [4]
  孟克迪 , 张国治 , 王赵改 , 史冠莹 . 基于GC-IMS比较不同干燥方式对香椿挥发性成分的影响. 轻工学报, 2024, 0(0): -.
5. [5]
  杜赫 , 杨洪峰 , 吴爽爽 , 赵怡凡 , 董露 , 田野 , 王志刚 , 陈晨 . 卷烟降焦减害滤棒构件的制备及应用. 轻工学报, 2024, 0(0): -.

点击查看大图

计量

PDF下载量: 31
文章访问数: 2840
引证文献数: 0

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

崔春, 楚文娟, 田海英, 等. 打孔方式对细支卷烟滤嘴通风率及感官品质的影响[J]. 轻工学报, 2020, 35(4): 40-45. doi: 10.12187/2020.04.006

引用本文: 崔春, 楚文娟, 田海英, 等. 打孔方式对细支卷烟滤嘴通风率及感官品质的影响[J]. 轻工学报, 2020, 35(4): 40-45. doi: 10.12187/2020.04.006

打孔方式对细支卷烟滤嘴通风率及感官品质的影响

作者简介:崔春(1986-),女,河南省驻马店市人,河南中烟工业有限责任公司工程师,主要研究方向为卷烟材料.

河南中烟工业有限责任公司技术中心, 河南郑州 450000

收稿日期: 2020-03-23

基金项目: 中国烟草总公司重大专项项目（110201601013（XZ-04））；河南中烟工业有限责任公司重点科技项目（ZW2016004）

关键词:

摘要: 为选择合适的打孔方式以提升细支卷烟的质量水平，考察了在线激光打孔、激光预打孔、静电打孔、等离子体打孔对细支卷烟滤嘴通风率、通风率稳定性和感官品质的影响.结果表明：4种打孔方式均可满足滤嘴通风率的设计需要；对于同一接装纸透气度，采用等离子体打孔和静电打孔的细支卷烟的滤嘴通风率较高；采用等离子体打孔和在线激光打孔的细支卷烟的滤嘴通风率稳定性相对较好；等离子体打孔和在线激光打孔更有利于改善细支卷烟的感官品质，当滤嘴通风率较低时，两种打孔方式的细支卷烟感官品质相当，而当滤嘴通风率较高时，采用在线激光打孔的细支卷烟的感官品质优于等离子体打孔.综上，等离子体打孔和在线激光打孔整体优于静电打孔和激光预打孔，是细支卷烟生产中的优选打孔方式.

English Abstract

Effects of perforation on filter ventilation rate and sensory quality of slim cigarrete

Technology Center, China Tobacco He'nan Industrial Co., Ltd., Zhengzhou 450000, China

Received Date: 2020-03-23

Abstract: In order to choose an appropriate perforation for improving the quality of slim cigarettes,effects of online laser,off-line laser,plasma and static electricity perforations on filter ventilation efficiency,filter ventilation rate stability and sensory quantity for slim cigarretes were investigated.The results showed that all of the four perforations could meet the design needs of filter ventilation rate.Higher filter ventilation rate could achieved of slim cigarettes perforated by plasma and static electricity when air permeability of tipping paper was fixed.Filter ventilation rate stability of slim cigarettes perforated by plasma and online laser was better comparatively.It was more beneficial for improvement of sensory quantity of slim cigarettes perforated by plasma and online laser.Sensory quantity of slim cigarettes perforated by these two ways was corresponded when the filter ventilation rate was lower,and that perforated by online laser was superior to perforated by plasma when the filter ventilation rate was higher.In conclusion,plasma and on-line laser perforations were better than static electricity and off-line laser perforations as a whole,and were the preferred punching methods in the production of slim cigarette.

参考文献 (15) 相关文章 (5)