[1] |
刘珊,崔凯,曾世通,等.加热非燃烧型烟草制品剖析[J].烟草科技,2016,49(11):56-65.
|
[2] |
SMITH M R,CLARK B,LUEDICKE F,et al.Evaluation of the Tobacco Heating System 2.2. Part 1:Description of the system and the scientific assessment program [J].Regulatory Toxico-logy and Pharmacology,2016,81(S2):S17-S26.
|
[3] |
HUGHES J R,KEELY J P.The effect of a novel smoking system-Accord-on ongoing smoking and toxin exposure[J].Nicotine & Tobacco Research, 2004,6(6):1021-1027.
|
[4] |
李翔,谢复炜,刘惠民.新型烟草制品毒理学评价研究进展[J].烟草科技, 2016,49(1):88-93.
|
[5] |
SCHALLER J P,KELLER D,POGET L,et al.Evaluation of the Tobacco Heating System 2.2. Part 2: Chemical composition, genotoxicity, cytotoxicity, and physical properties of the aerosol[J]. Regulatory Toxicology and Pharmacology,2016,81(S2):S27-S47.
|
[6] |
JACCARD G,TAFIN D D,MOENNIKES O,et al.Comparative assessment of HPHC yields in the Tobacco Heating System THS2.2 and commercial cigarettes[J].Regulatory Toxicology and Pharmacology,2017,90:1-8.
|
[7] |
BOUE S,GOEDERTIER D,HOENG J,et al.State-of-the-art methods and devices for the generation,exposure,and collection of aerosols from heat-not-burn tobacco products [J].Toxicology Research and Application,2020,4:1-40.
|
[8] |
CARVALHO T C,PETERS J I,WILLIAMS R O.Influence of particle size on regional lung deposition: What evidence is there?[J].International Journal of Pharmaceutics.2011,406(1/2):1-10.
|
[9] |
SAHU S,TIWARI M,BHANGARE R,et al.Particle size distribution of mainstream and exhaled cigarette smoke and predictive deposition in human respiratory tract[J].Aerosol and Air Quality Research,2013,13(1):324-332.
|
[10] |
MANIGRASSO M,BUONANNO G,FUOCO F C,et al.Aerosol deposition doses in the human respiratory tree of electronic cigarette smokers[J].Environmental Pollution,2015,196:257-267.
|
[11] |
ZHANG Z,KLEINSTREUER C,HYUN S.Size-change and deposition of conventional and composite cigarette smoke particles during inhalation in a subject-specific airway model[J].Journal of Aerosol Science,2012,46:34-52.
|
[12] |
KANE D B, ASGHARIAN B, PRICE O T, et al. Effect of smoking parameters on the particle size distribution and predicted airway deposition of mainstream cigarette smoke[J].Inhalation Toxicology,2010,22(3):199-209.
|
[13] |
SYMONDS P R J,REAVELL K S,OLFERT J S,et al.Diesel soot mass calculation in real-time with a differential mobility spectrometer[J].Journal of Aerosol Science,2007,38(1):52-68.
|
[14] |
ALDERMAN S L,INGEBRETHSEN B J.Characterization of mainstream cigarette smoke particle size distributions from commercial cigarettes using a DMS500 fast particulate spectrometer and cycle simulator[J].Aerosol Science and Technology, 2011, 45(12):1409-1421.
|
[15] |
段沅杏,赵伟,杨继,等.传统卷烟与电子烟烟气气溶胶粒径分布研究[J].中国烟草学报, 2015,21(1):1-5.
|
[16] |
CUI H P,YURTERI C U,CABOT R,et al.Characterization of mainstream cigarette smoke aerosol by size-fractionated chemical analysis of nicotine, solanesol, and tobacco specific nitrosamines[J].Particulates Science and Technology,2020,38:587-595.
|
[17] |
司晓喜,汤建国,朱瑞芝,等.两种抽吸模式下电加热不燃烧卷烟烟气气溶胶的粒径分布[J].烟草科技,2018,51(8):47-52.
|
[18] |
MARKUS N,ARKADIUSZ K K.Modeling aerosol formation in an electrically heated tobacco product[J].International Journal of Chemical and Molecular Engineering, 2016,10(4):373-385.
|
[19] |
VLADIMIR B B,MARIELLE C B,COURTNEY A G,et al.Real-time measurement of electronic cigarette aerosol size distribution and metals content analysisr[J].Nicotine & Tobacco Research, 2016,18(9):1895-1902.
|
[20] |
王诗太,金勇,李克,等.醇类溶剂对电子烟雾化气溶胶粒径分布的影响[J].中国烟草科技,2017,23(6):31-35.
|
[21] |
BAKER R R.Smoke generation inside a burning cigarette: Modifying combustion to develop cigarettes that may be less hazardous to health[J].Progress in Energy & Combustion Science,2006,32(4):373-385.
|
[22] |
ADAM T,MCAUGHEY T,MCGRATH C,et al.Simultaneous online size and chemical analysis of gas phase and particulate phase of cigarette mainstream smoke[J].Analytical and Bioanalytical Chemistry,2009,394(4):1193-1203.
|
[23] |
MARKUS N,ARKADIUSZ K K.Modeling aerosol formation in an electrically heated tobacco product[J].International Journal of Chemical and Molecular Engineering,2016,10(4):373-385.
|