基于ABAQUS的VCM深冲钢板拉伸性能分析

郭照灿; 张德海; 许志瀚

doi:10.12187/2021.05.015

CN 41-1437/TS ISSN 2096-1553

郭照灿 , 张德海 , 许志瀚

郭照灿, 张德海, 许志瀚. 基于ABAQUS的VCM深冲钢板拉伸性能分析[J]. 轻工学报, 2021, 36(5): 118-124. doi: 10.12187/2021.05.015

引用本文: 郭照灿, 张德海, 许志瀚. 基于ABAQUS的VCM深冲钢板拉伸性能分析[J]. 轻工学报, 2021, 36(5): 118-124. doi: 10.12187/2021.05.015

GUO Zhaocan, ZHANG Dehai and XU Zhihan. Tensile property analysis of VCM deep drawing steel plate based on ABAQUS[J]. Journal of Light Industry, 2021, 36(5): 118-124. doi: 10.12187/2021.05.015

Citation: GUO Zhaocan, ZHANG Dehai and XU Zhihan. Tensile property analysis of VCM deep drawing steel plate based on ABAQUS[J]. Journal of Light Industry, 2021, 36(5): 118-124. doi: 10.12187/2021.05.015

基于ABAQUS的VCM深冲钢板拉伸性能分析

1. 郑州轻工业大学机电工程学院, 河南郑州 450002;
2. 东北大学机械工程与自动化学院, 辽宁沈阳 110000

作者简介: 郭照灿(1993-),男,河南省平顶山市人,郑州轻工业大学硕士研究生,主要研究方向为双金属复层材料组织与性能.;

基金项目: 河南省科技发展计划项目（202102210087）
中图分类号: TB333

Tensile property analysis of VCM deep drawing steel plate based on ABAQUS

1. College of Mechanical and Electrical Engineering, Zhengzhou University of Light Industry, Zhengzhou 450002, China;
2. School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110000, China
Received Date: 2020-07-15
Accepted Date: 2021-03-03

CLC number: TB333

摘要: 为探究VCM深冲钢板拉伸性能及其与组分材料的关系，采用ABAQUS有限元方法对VCM深冲钢板及其组分材料进行数值模拟，并对相关力学参数（抗拉强度、上屈服强度、断裂应变和断后伸长率）进行对比分析，通过引入影响系数研究钢板基板和VCM薄膜对VCM深冲钢板力学性能的影响.结果表明，基板表面粘结VCM薄膜后，VCM深冲钢板相较于钢板基板在强度和塑性方面均有所提高；钢板基板对VCM深冲钢板的抗拉强度和上屈服强度的影响较大，VCM薄膜对VCM深冲钢板的断裂应变和断后伸长率的影响较大，即钢板基板对VCM深冲钢板的强度影响较大，VCM薄膜对VCM深冲钢板的塑性和延展性影响较大.
- VCM深冲钢板 /
- 拉伸性能 /
- 有限元方法 /
- ABAQUS /
- 影响系数
Abstract: In order to explore the tensile properties of VCM deep drawing steel plate and its relationship with constituent materials,ABAQUS finite element method was used to conduct numerical simulation of VCM deep drawing steel plate and its constituent materials,and the relevant mechanical parameters (tensile strength,upper yield strength,fracture strain and elongation after fracture) were compared and analyzed.The influence coefficient of steel plate substrate and VCM film on the mechanical properties of VCM deep drawing steel plate was introduced.The results showed that the strength and plasticity of VCM deep drawing steel plate were improved compared with that of steel plate substrate after the VCM film was bonded on the substrate surface.The steel plate substrate had a great influence on the tensile strength and upper yield strength of VCM deep drawing steel plate,and the VCM film had a great influence on the fracture strain and elongation after fracture of VCM deep drawing steel plate,that was,the steel plate substrate had a great influence on the strength of VCM deep drawing steel plate,and the VCM film had a great influence on the plasticity and ductility of VCM deep drawing steel plate.
- VCM deep drawing steel plate /
- tensile property /
- finite element method /
- ABAQUS /
- influence coefficient
1. [1]
  李顺雨.锡青铜-钢双金属复合板组织控制及其性能研究[D].大连:大连理工大学,2019.
2. [2]
  蔡富刚,王硕,郭福海,等.高性能复合材料在轨道交通领域的发展现状[J].高科技纤维与应用,2020,45(2):22.
3. [3]
  孙柯楠.试论新型金属材料成型加工技术[J].河南建材,2020(4):28.
4. [4]
  文双玲,陈禄如,任玉苓,等.国产建筑用彩图钢板发展和应用[J].钢结构(中英文),2019,34(6):112.
5. [5]
  王群骄,于九明.铜/铝轧制复层板复合界面行为的研究[C]//中国金属学会青年委员会、北京机械工程学会.第三届层压金属复合材料开发与应用学术研讨会文集.北京:机械工业出版社,2012:95.
6. [6]
  YAN G Y,MAO F,CHEN F,et al.Effect of homogenization annealing on microstructure,composition and mechanical properties of 7050/6009 bimetal slab[J].Transactions of Nonferrous Metals Society of China,2016,26(10):2532.
7. [7]
  梁晋,郭翔,李磊刚,等.铜/铝复层板成形极限视觉测量方法及成形性能[J].中国机械工程,2015,21(7):977.
8. [8]
  张德海,李艳芹,刘建秀,等.基于数字散斑相关法的双金属复层板应变光学检测问题研究[J].应用光学,2018,39(6):873.
9. [9]
  孙涛,梁晋,郭翔,等.基于DIC的预应变下铜/铝复层板各向异性性能检测与研究[J].材料工程,2014,14(5):78.
10. [10]
  QING H.2D micromechanical analysis of SiC/Al metal matrix composites under tensile,shear and combined tensile/shear loads[J].Materials & Design,2013,51:438.
11. [11]
  曹岩,沈冰,程文.有限元分析与实例详解:ABAQUS6.14中文版[M].北京:清华大学出版社,2018.
12. [12]
  LEE S H,SHIN K J,LEE H D,et al.ABAQUS modeling for post-tensioned reinforced concrete beams[J].Journal of Building Engineering,2020,30(10):1273.
13. [13]
  MOREL S,PARENT T,DUBOIS F,et al.Frictional cohesive zone model for quasi-brittle fracture:mixed-mode and coupling between cohesive and frictional behaviors[J].International Journal of Solids and Structures,2020,198:17.
14. [14]
  张华伟,李博宏.基于ABAQUS的碳纤维复合材料板热冲压成形仿真[J].合成纤维工业,2019,42(2):16.
15. [15]
  吕希建,唐德文,邹树梁.基于ABAQUS的Ti6Al4V切削仿真研究[J].机械工程与自动化,2017(1):66.
16. [16]
  刘倩楠,刘新金.采用ABAQUS的粘胶机织物拉伸力学性能仿真[J].纺织学报,2018,39(9):39.
17. [17]
  王振军,田亮,蔡长春,等.CF/Al复合材料横向拉伸渐进损伤与弹塑性力学行为[J].中国有色金属学报,2019,29(3):458.
18. [18]
  张志城,从一博,张德海,等.基于数字散斑相关方法的VCM深冲钢板力学性能评价[J].精密成形工程,2020,12(2):37.
1. [1]
  刘广超 , 邓莎 , 高峄涵 , 吴涛 , 邓锐杰 . 加热卷烟辊压法薄片丝吸湿性影响因素研究. 轻工学报, 2024, 39(5): 109-117. doi: 10.12187/2024.05.013
2. [2]
  尹思睿 , 冯娇 , 杨晓宇 , 李良 . 植物蛋白复配对植物肉品质的影响. 轻工学报, 2024, 39(5): 18-28. doi: 10.12187/2024.05.003
3. [3]
  赵悦 , 闫清泉 , 李玲玉 , 司阔林 , 宗学醒 . 钙螯合盐对牛奶-豌豆双蛋白再制干酪品质的影响. 轻工学报, 2024, 39(5): 1-8. doi: 10.12187/2024.05.001
4. [4]
  贾尚羲 , 张怡雪 , 石盼盼 , 王昱 , 李可 . 不同时长超声波处理对鹰嘴豆分离蛋白乳化液稳定性的影响. 轻工学报, 2024, 39(5): 40-49. doi: 10.12187/2024.05.005
5. [5]
  胡新楠 , 朱成凯 , 胡中泽 , 纪执立 , 金伟平 , 郭城 , 沈汪洋 . 复配比对明胶-羟丙基甲基纤维素双水相体系微观结构和流变特性的影响. 轻工学报, 2024, 0(0): -.
6. [6]
  吴晓东 , 刘畅 , 李俊 , 胡良志 , 贺凌晨 , 袁海霞 , 李强 , 黄锦标 . 基于高光谱检测的烟丝加香均匀性表征方法. 轻工学报, 2024, 39(5): 95-101. doi: 10.12187/2024.05.011
7. [7]
  张伟伟 , 姬远鹏 , 元春波 , 王君婷 , 齐晓任 , 张卫正 , 李萌 , 饶智 . 基于改进Mask R-CNN模型的粘连烟丝识别方法. 轻工学报, 2024, 39(5): 78-85. doi: 10.12187/2024.05.009
8. [8]
  李敏 , 贺姗姗 , 杨钰雯 . 改良QuEChERS方法结合超高效液相色谱测定火腿肠中杂环胺类化合物. 轻工学报, 2024, 39(5): 60-70. doi: 10.12187/2024.05.007

点击查看大图

计量

PDF下载量: 10
文章访问数: 1127
引证文献数: 0

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

郭照灿, 张德海, 许志瀚. 基于ABAQUS的VCM深冲钢板拉伸性能分析[J]. 轻工学报, 2021, 36(5): 118-124. doi: 10.12187/2021.05.015

引用本文: 郭照灿, 张德海, 许志瀚. 基于ABAQUS的VCM深冲钢板拉伸性能分析[J]. 轻工学报, 2021, 36(5): 118-124. doi: 10.12187/2021.05.015

GUO Zhaocan, ZHANG Dehai and XU Zhihan. Tensile property analysis of VCM deep drawing steel plate based on ABAQUS[J]. Journal of Light Industry, 2021, 36(5): 118-124. doi: 10.12187/2021.05.015

基于ABAQUS的VCM深冲钢板拉伸性能分析

作者简介:郭照灿(1993-),男,河南省平顶山市人,郑州轻工业大学硕士研究生,主要研究方向为双金属复层材料组织与性能.

1. 郑州轻工业大学机电工程学院, 河南郑州 450002;
2. 东北大学机械工程与自动化学院, 辽宁沈阳 110000

收稿日期: 2020-07-15
录用日期: 2021-03-03

基金项目: 河南省科技发展计划项目（202102210087）

关键词:

摘要: 为探究VCM深冲钢板拉伸性能及其与组分材料的关系，采用ABAQUS有限元方法对VCM深冲钢板及其组分材料进行数值模拟，并对相关力学参数（抗拉强度、上屈服强度、断裂应变和断后伸长率）进行对比分析，通过引入影响系数研究钢板基板和VCM薄膜对VCM深冲钢板力学性能的影响.结果表明，基板表面粘结VCM薄膜后，VCM深冲钢板相较于钢板基板在强度和塑性方面均有所提高；钢板基板对VCM深冲钢板的抗拉强度和上屈服强度的影响较大，VCM薄膜对VCM深冲钢板的断裂应变和断后伸长率的影响较大，即钢板基板对VCM深冲钢板的强度影响较大，VCM薄膜对VCM深冲钢板的塑性和延展性影响较大.

English Abstract

Tensile property analysis of VCM deep drawing steel plate based on ABAQUS

1. College of Mechanical and Electrical Engineering, Zhengzhou University of Light Industry, Zhengzhou 450002, China;
2. School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110000, China

Received Date: 2020-07-15
Accepted Date: 2021-03-03

Abstract: In order to explore the tensile properties of VCM deep drawing steel plate and its relationship with constituent materials,ABAQUS finite element method was used to conduct numerical simulation of VCM deep drawing steel plate and its constituent materials,and the relevant mechanical parameters (tensile strength,upper yield strength,fracture strain and elongation after fracture) were compared and analyzed.The influence coefficient of steel plate substrate and VCM film on the mechanical properties of VCM deep drawing steel plate was introduced.The results showed that the strength and plasticity of VCM deep drawing steel plate were improved compared with that of steel plate substrate after the VCM film was bonded on the substrate surface.The steel plate substrate had a great influence on the tensile strength and upper yield strength of VCM deep drawing steel plate,and the VCM film had a great influence on the fracture strain and elongation after fracture of VCM deep drawing steel plate,that was,the steel plate substrate had a great influence on the strength of VCM deep drawing steel plate,and the VCM film had a great influence on the plasticity and ductility of VCM deep drawing steel plate.

参考文献 (18) 相关文章 (8)