JOURNAL OF LIGHT INDUSTRY

CN 41-1437/TS  ISSN 2096-1553

Volume 37 Issue 4
August 2022
Article Contents
WAN Jiqiang, HU Shaodong, CUI Chun, et al. Effect of cavity diameter on the mainstream smoke and sensory quality of cigarettes with circular cavity combined filter rods[J]. Journal of Light Industry, 2022, 37(4): 81-85,93. doi: 10.12187/2022.04.011
Citation: WAN Jiqiang, HU Shaodong, CUI Chun, et al. Effect of cavity diameter on the mainstream smoke and sensory quality of cigarettes with circular cavity combined filter rods[J]. Journal of Light Industry, 2022, 37(4): 81-85,93. doi: 10.12187/2022.04.011 shu

Effect of cavity diameter on the mainstream smoke and sensory quality of cigarettes with circular cavity combined filter rods

  • Received Date: 2021-10-28
  • Under the condition of the same cavity depth, four circular cavity combined filter rods with different cavity diameter were designed, and the influence of cavity diameter on the main physical and chemical indexes and sensory quality of cigarettes was studied. The results showed as follows: the release amounts of total particulate matter, tar and nicotine of circular cavity combined filter cigarettes increased with the increase of cavity diameter, and were higher than those of cigarettes with ordinary cellulose acetate filters. The nicotine interception in ordinary tow segment had little change, while the nicotine interception in the tow segment of the cavity filter rod and the nicotine interception per unit area gradually decreased with the increase of the cavity diameter. With the increase of cavity diameter, the hazard index of combined filter cigarettes increased, and the offset of cigarette hazard index gradually increased. The sensory quality evaluation score of combined filter cigarettes decreased with the increase of the cavity diameter.
  • 加载中
    1. [1]

      深圳烟草工业有限责任公司.一种异形滤嘴:201910383411.6[P].2019-05-09.

    2. [2]

      江苏大亚滤嘴材料有限公司.中空异形加香滤棒:201520395328.8[P].2015-06-10.

    3. [3]

      湖北中烟工业有限责任公司.全中空式过滤嘴卷烟:201220290967.4[P].2012-06-20.

    4. [4]

      文建辉,秦亮生,丁多,等.酚类化合物在滤嘴中的过滤效率和截留分布模式[J].烟草科技,2014,47(5):42-48.

    5. [5]

      李艳平,文建辉,彭斌,等.不同结构滤嘴的烟碱截留效率和空间分布模式[J].烟草科技, 2013,46(2):57-61.

    6. [6]

      吴钊,张源,傅靖刚,等.异形空芯结构对多元复合滤棒压降影响[J].烟草科技,2018,51(2):62-68.

    7. [7]

      中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.卷烟用常规分析用吸烟机测定总粒相物和焦油:GB/T 19609-2004[S].北京:中国标准出版社, 2004.

    8. [8]

      国家烟草专卖局.卷烟总粒相物中烟碱的测定气相色谱法卷:YC/T 156-2001[S].北京:中国标准出版社,2001.

    9. [9]

      中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.卷烟烟气气相中一氧化碳的测定非散射红外法:GB/T 23356-2009[S].北京:中国标准出版社, 2009.

    10. [10]

      中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.常规分析用吸烟机定义和标准条件:GB/T 16450-2004[S].北京:中国标准出版社,2004.

    11. [11]

      国家烟草专卖局.卷烟滤嘴中烟碱的测定气相色谱法:YC/T 154-2001[S].北京:中国标准出版社,2001.

    12. [12]

      国家烟草专卖局.卷烟主流烟气中氰化氢的测定连续流动法:YC/T 253-2019[S].北京:中国标准出版社,2019.

    13. [13]

      中国国家标准化管理委员会.卷烟主流烟气总粒相物中烟草特有N-亚硝胺的测定气相色谱-热能分析联用法:GB/T 23228-2008[S].北京:中国标准出版社,2008.

    14. [14]

      中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.卷烟烟气总粒相物中苯并[a]芘的测定:GB/T 21130-2007[S].北京:中国标准出版社,2007.

    15. [15]

      国家烟草专卖局.卷烟主流烟气中主要酚类化合物的测定高效液相色谱法:YC/T 255-2008[S].北京:中国标准出版社,2008.

    16. [16]

      国家烟草专卖局.卷烟主流烟气中主要羰基化合物的测定高效液相色谱法:YC/T 254-2008[S].北京:中国标准出版社,2008.

    17. [17]

      国家烟草专卖局.卷烟主流烟气中氨的测定浸渍处理剑桥滤片捕集-离子色谱法:YC/T 377-2019[S].北京:中国标准出版社, 2019.

    18. [18]

      中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.卷烟第4部分:感官技术要求:GB 5606.4-2005[S].北京:中国标准出版社,2005.

    19. [19]

      陆倩倩,阮健,李胜.伯努利效应引起滑阀阀芯径向力的研究[J].中国机械工程,2017,28(19):2332-2338.

    20. [20]

      谢剑平,刘惠民,朱茂祥,等.卷烟烟气危害性指数研究[J].烟草科技,2009,42(2):5-15.

Article Metrics

Article views(2765) PDF downloads(33) Cited by()

Ralated
    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return