卷烟制丝过程物料质量稳定性评价
Evaluation of material uniformity in cigarette spinning process
-
摘要: 以烟草样本中糖碱比与钾含量的乘积作为特性值,基于卷烟制丝过程样本特性值正态分布检验和烟草混合均匀度计算,通过控制图、过程能力指数及烟草混合能力分析,探究各工序烟草质量稳定性及其变化规律。结果表明:松散回潮工序烟草混合均匀度67.04%,变异系数达到32.96%,其混合均匀性较差;预混对烟草混合均匀性的提升贡献最大,一级加料预混后方差降低指数17.59,烟草混合均匀度达到94.30%;松散回潮和一级加料预混工序中烟草物料加工质量稳定性欠佳,后续4个工序烟草物料混合均匀度＞95%,过程能力指数CP值均接近2.0,加工质量稳定性较优。根据该结果可在卷烟制丝过程采用增加烟块切刀次数、增加预混柜等方式改善物料的混合均匀性和质量稳定性。Abstract: The product of sugar-base ratio and potassium content in tobacco samples was used as the property value,and the normal distribution test of sample property value in cigarette making process and the calculation of tobacco mixing uniformity were conducted. Through the analysis of control chart, process capability index and tobacco mixing ability, the quality stability and variation law of tobacco in each process were explored. The results showed that the mixing uniformity of tobacco in loose moisture regain process was 67. 04%, the coefficient of variation was 32. 96%, and the mixing uniformity was poor. Premixing contributed the most to the improvement of tobacco mixing uniformity, with the variance reduction index of 17. 59 after first-order feeding premixing, and the tobacco mixing uniformity reached 94. 30%. The processing quality stability of tobacco materials in loose moisture regain and primary feeding premixing process was poor. The mixing uniformity of tobacco materials in the subsequent four processes was more than 95%, and the process capability index CP value was close to 2. 0. The processing quality stability was better. According to the results, the mixing uniformity and quality stability of the material could be improved by increasing the number of cigarette cutters and increasing the premixed cabinet in the cigarette making process.
-
Key words:
- property value /
- cigarette making /
- mixing uniformity /
- process capability /
- quality stability
-
-
[1]
穆童,李东亮,姚倩,等.不同部位烤烟非挥发性有机酸含量与品质指标的关系分析[J].南方农业学报,2018,49(5):963-970.
-
[2]
王跃昆,龙明海,何邦华,等.打叶复烤成品片烟质量稳定性的色差法评价[J].烟草科技,2013(12):9-13.
-
[3]
刘栋,陈越立,李华杰,等.取样量、取样次数对烟丝混合均匀性检测的影响[J].郑州轻工业学院学报(自然科学版),2013,28(1):45-49.
-
[4]
高川川,史训瑶,朱文静,等.用质控图和稳健统计-迭代法评估烟草中钾的实验室测量不确定度[J].烟草科技,2015,48(3):53-60.
-
[5]
杨超,丁根胜,万里兴,等.基于烟叶化学成分的卷烟叶组感官质量和风格研究[J].烟草科技,2018,51(8):8-16.
-
[6]
许春平,熊亚妹,刘远上,等.不同加热醇化时间对烟草薄片浓缩液香味成分的影响[J].轻工学报,2021,36(1):30-38.
-
[7]
李庆祥,梁淼,刘向真,等.打叶复烤各工序对烟叶糖碱比稳定性的影响[J].湖南农业大学学报(自然科学版),2019,45(3):269-272.
-
[8]
赵科文,陈实,蒋浩,等.基于近红外光谱技术的烟丝掺配均匀度测定[J].食品与机械,2020,36(11):183-188.
-
[9]
OPALEYE A,OKUNADE O,ADEDEJI T,et al.Quality characterisation and capability assessment of a tobacco company[J].American Journal of Theoretical and Applied Statistics,2020, 9(4):127.
-
[10]
KHADSE K G,SHINDE R L.A new probability-based multivariate process capability index[J].International Journal of Quality Engineering and Technology,2021,8(3):249-267.
-
[11]
HUANG P P,LIU H W.Application of SPC in the quality control of the leaf tobacco threshing and redrying production[J].Applied Mechanics and Materials,2012,109:56-59.
-
[12]
国家烟草专卖局.烟草及烟草制品总植物碱的测定连续流动法:YC/T 160-2002[S].北京:中国标准出版社,2002.
-
[13]
国家烟草专卖局.烟草及烟草制品水溶性糖的测定连续流动法:YC/T 159-2019[S].北京:中国标准出版社,2019.
-
[14]
国家烟草专卖局.烟草及烟草制品钾的测定连续流动法:YC/T 217-2007[S].北京:中国标准出版社,2007.
-
[15]
杜云鹏,舒江,侯小波.基于正态分布统计分析的烘丝前全工艺流程烟丝水分预测模型[J].工业技术创新,2021,8(2):119-124.
-
[16]
国家烟草专卖局.烟草混合均匀度的测定:YC/T 426-2012[S].北京:中国标准出版社,2012.
-
[17]
刘泽春,黄华发,洪伟龄,等.过程能力分析在卷烟加料均匀性评价中的应用[J].烟草科技,2010(10):5-7.
-
[18]
刘栋.烟丝混合均匀性研究[D].郑州:中国烟草总公司郑州烟草研究院,2011.
-
[19]
唐军,唐丽,文里梁,等.烟叶松散回潮工艺参数和出料质量的贝叶斯网络模型构建与预测[J].食品与机械,2020,36(9):207-210.
-
[20]
于建军.卷烟工艺学[M].北京:中国农业出版社,2009.
-
[1]
-
点击查看大图
计量
- PDF下载量: 40
- 文章访问数: 1651
- 引证文献数: 0
下载:
