滤嘴通风对加热卷烟气溶胶物理特性及其温度的影响
Effects of filter ventilation on physical properties and temperature of aerosol in heated tobacco products
-
摘要: 为研究滤嘴通风对加热卷烟气溶胶释放的影响,制备了滤嘴空腔段通风孔数量分别为0、2、4、6、8的1#—5#加热卷烟样品,分别采用微探针取样原位气溶胶表征方法和热电偶测温法考查了通风孔数量对气溶胶物理特性和温度的影响规律。结果表明:滤嘴通风改变了气溶胶的粒径分布,通风孔后气溶胶的粒数浓度和体积浓度随通风孔数量的增加呈降低趋势,5#样品气溶胶体积浓度相较于1#样品降低了57.4%,通风减小了气溶胶的粒数中值粒径,但其随通风孔数量的变化规律不显著;通风孔后气溶胶的温度随通风孔数量的增加呈降低趋势,5#样品气溶胶温度相较于1#样品降低了23.0℃;通风孔前、后气溶胶体积浓度与温度均呈现中轴线处高,且沿径向随距离增大逐渐降低的分布趋势。Abstract: In order to study the influence of filter ventilation of heated tobacco products on aerosol released, 1#—5# heated tobacco products samples with 0, 2, 4, 6, and 8 ventilation holes set at cavity section of filter were prepared. With an in-situ aerosol characterization method with microprobe sampling and a thermocouple temperature measurement method, the effects of ventilation on the physical properties and temperature of aerosol were investigated and analyzed. The results showed that filter ventilation changed the particle size distribution of aerosol in heated tobacco products. The particle number concentration and volume concentration of aerosol behind ventilation holes in heated tobacco products decreased with the increase of the number of ventilation holes. The reduction rate of particle volume concentration of aerosol from sample 5# was 57.4% compared with sample 1#. Ventilation reduced the count median diameter of aerosol. However, the change of count median diameter with the number of ventilation holes was not significant. The temperature of aerosol in front of and behind ventilation holes decreased with the increase of the number of ventilation holes. The aerosol temperature of sample 5# was 23.0 ℃ lower than that of sample 1#. The particle volume concentration and temperature of aerosol in front of and behind ventilation holes were higher at the central axis and lower along the radial distance.
-
-
[1]
刘珊,崔凯,曾世通,等.加热非燃烧型烟草制品剖析[J].烟草科技,2016,49(11):56-65.
-
[2]
SMITH M R,CLARK B,LUEDICKE F,et al.Evaluation of the tobacco heating system 2.2.Part 1:Description of the system and the scientific assessment program[J].Regulatory Toxicology and Pharmacology,2016,81(Suppl.2):s17-s26.
-
[3]
CHRISTOPH W,ARKADIUSZ K K,MARKUS N,et al.Simulation of aerosol formation due to rapid cooling of multispecies vapors[J].Journal of Engineering Mathematics,2018,108(1):171-196.
-
[4]
罗玮,谢兰英,秦亮生,等.加热卷烟"降温低截留"滤棒的制备及应用[J].烟草科技,2021,54(3):50-57.
-
[5]
郭新月,杨占平,宋晓梅,等.加热不燃烧卷烟烟气降温技术研究进展[J].中国烟草学报,2020,26(3):24-32.
-
[6]
马扩彦,刘义波,唐杰,等.聚乳酸膜材料在加热卷烟中的应用研究[J].中国烟草学报,2022,28(3):9-16.
-
[7]
LI B,ZHAO L C,YU C F,et al.Effect of machine smoking intensity and filter ventilation level on gas-phase temperature distribution inside a burning cigarette[J].Beitr Tabakforsch Int,2014,26:191-203.
-
[8]
BROWNE C L,KEITH C H,ALLEN R E,et al.The effect of filter ventilation on the yield and composition of mainstream and sidestream smokes[J].Beitr Tabakforsch Int,1980,10:81-90.
-
[9]
崔华鹏,陈黎,樊美娟,等.电加热卷烟气溶胶物理特性的表征[J].轻工学报,2022,37(2):87-93.
-
[10]
崔华鹏,陈黎,樊美娟,等.加热温度对加热卷烟气溶胶物理特性的影响[J].烟草科技,2022,55(4):36-41.
-
[11]
王帅鹏,崔华鹏,陈黎,等.抽吸参数对电加热卷烟气溶胶粒数和粒径的影响[J].烟草科技,2022,55(9):44-50.
-
[12]
LI B,PANG H R,ZHAO L C,et al.Quantifying gas-phase temperature inside a burning cigarette[J].Industrial & Engineering Chemistry Research,2014,53:7810-7820.
-
[13]
崔华鹏,孟璠,陈黎,等.加热卷烟抽吸过程中气溶胶动态分布表征系统的开发[J].烟草科技,2023,56(1):60-65.
-
[14]
MENG F,CUI H P,FAN M J,et al.Spatially resolved aerosol characterization during thermal distillation and pyrolysis of tobacco using an in-situ microprobe sampling coupled with fast particulate spectrometer[J].Journal of Analytical and Applied Pyrolysis,2023,170:105911.
-
[15]
孟璠,崔华鹏,陈黎,等.不同加热温度加热卷烟抽吸过程中烟芯段气溶胶的动态分布[J].烟草科技,2023,56(3):41-50.
-
[16]
王乐,王亚林,李志强,等.电加热卷烟烟芯段温度分布和烟气关键成分逐口变化:第1部分 实验[J].烟草科技,2021,54(3):31-39.
-
[17]
吴君章,孔浩辉,沈光林,等."三纸一棒"对卷烟烟气气溶胶粒度分布的影响[J].烟草科技,2013,46(9):58-62
,67. -
[18]
VEHKAMEOKI H.Classical nucleation theory in multicomponent systems[M].Berlin:Springer-Verlag,2006.
-
[19]
MARKUS N,ARKADIUSZ K K.Modeling aerosol formation in an electrically heated tobacco product[J].International Scholarly and Scientific Research & Innovation,2016,10(4):373-385.
-
[1]
计量
- PDF下载量: 31
- 文章访问数: 2632
- 引证文献数: 0