基于增量式PID算法的香精施加系统设计

罗亮; 师东方; 朱鲜艳; 宗东岳; 王明辉; 王鹏飞; 金强; 李朝建

doi:10.12187/2024.02.015

CN 41-1437/TS ISSN 2096-1553

基于增量式PID算法的香精施加系统设计

罗亮 , 师东方 , 朱鲜艳 , 宗东岳 , 王明辉 , 王鹏飞 , 金强 , 李朝建

罗亮, 师东方, 朱鲜艳, 等. 基于增量式PID算法的香精施加系统设计[J]. 轻工学报, 2024, 39(2): 114-121. doi: 10.12187/2024.02.015

引用本文: 罗亮, 师东方, 朱鲜艳, 等. 基于增量式PID算法的香精施加系统设计[J]. 轻工学报, 2024, 39(2): 114-121. doi: 10.12187/2024.02.015

LUO Liang, SHI Dongfang, ZHU Xianyan, et al. Flavoring system design based on incremental PID algorithm[J]. Journal of Light Industry, 2024, 39(2): 114-121. doi: 10.12187/2024.02.015

Citation: LUO Liang, SHI Dongfang, ZHU Xianyan, et al. Flavoring system design based on incremental PID algorithm[J]. Journal of Light Industry, 2024, 39(2): 114-121. doi: 10.12187/2024.02.015

基于增量式PID算法的香精施加系统设计

1. 南通烟滤嘴有限责任公司研发中心, 江苏南通 226001;
2. 江苏中烟工业有限责任公司技术中心, 江苏南京 210019

作者简介: 罗亮(1988-),男,湖南省益阳市人,南通烟滤嘴有限责任公司工程师,主要研究方向为烟草设备及滤棒研发。E-mail:luoliang203@163.com;

基金项目: 中国烟草总公司科技重大专项项目(110201901008(XX-08))
江苏中烟工业有限责任公司科技项目(202205,202232,202233)
中图分类号: TS43

Flavoring system design based on incremental PID algorithm

1. R&D Center, Nantong Cigarette Filter Co., Ltd., Nantong 226001, China;
2. Technology Center, China Tobacco Jiangsu Industrial Co., Ltd., Nanjing 210019, China
Received Date: 2023-05-26
Accepted Date: 2023-10-24

CLC number: TS43

摘要: 为解决加热不燃烧烟草制品生产过程中香精施加量无法根据薄片质量变化进行实时调控的问题,设计了一种基于增量式PID算法的香精施加系统。该系统由称重单元、螺杆泵、喷嘴、流量传感器等组成,通过称重单元实时获取薄片质量数据,根据理论计算模型确定香精施加量,基于增量式PID算法驱动螺杆泵定量输出香精至喷嘴中,利用流量传感器对香精施加量实时反馈,实现香精精准施加。验证结果表明,当薄片质量发生变化时,香精施加量可快速调整,最大超调量为1 %,最长调整时间为1.8 s,系统具有较好的跟踪性能;施加量检测值与理论值的偏移率为0.23 %~0.52 %,施加量组内波动为3.11 %~4.17 %,系统可实现香精的准确、均匀、稳定施加。
- 加热不燃烧烟草制品 /
- 增量式PID算法 /
- 香精施加系统 /
- 薄片
Abstract: In order to solve the problem that the spray weight could not be adjusted and controlled according to the weight change of the tobacco sheet during the manufacturing process of heat-not-burn tobacco product in real time, a flavoring system was designed based on incremental PID algorithm. The flavoring system was composed of weighing unit, screw pumps, nozzles, and flow sensors. The weight of the tobacco sheet roll was obtained through the weighing unit in real time, then the spray weight was calculated according to the theoretical calculation model, and the screw pumps were driven to output target flow to the nozzles based on incremental PID algorithm, the real-time spray weight was got from the flow sensors, and at last tobacco flavor was sprayed on the tobacco sheet. The results showed that the spray weight could be adjusted and controlled according to the weight change of the tobacco sheet in real time, the maximum overshoot of the flavoring system was 1 %, and the maximum adjustment time was 1.8 s, the system had good tracking performance. The deviation ratio of the spray weight was 0.23 %~0.52 % between the detection value and the theoretical value, the variation of the spray weight within samples was 3.11 %~4.17 %. It showed that the flavoring system could realize accurate, uniform and stable application.
- heat-not-burn tobacco product /
- incremental PID algorithm /
- flavoring system /
- tobacco sheet
1. [1]
  张丽,王维维,张小涛,等.加热不燃烧卷烟气溶胶中主要成分的转移行为[J].烟草科技,2019,52(3):46-55.
2. [2]
  李朝建,饶先立,郑晓云,等.不同工艺制备的加热卷烟烟草薄片热失重行为研究[J].轻工学报,2022,37(1):55-61.
3. [3]
  李朝建,吴承澄,罗亮,等.加热卷烟烟芯材料及烟支的吸湿特性研究[J].中国造纸,2022,41(10):118-123.
4. [4]
  张珍禛,蒋成勇,朱景溯,等.卷烟制丝加香工序加香均匀性及其影响因素研究[J].轻工学报,2019,34(6):48-55.
5. [5]
  吴秉宇,俞森文,费婷,等.不同加香方式下细支卷烟中烟用香精转移行为研究[J].轻工学报,2022,37(5):91-97.
6. [6]
  付永民,范磊,方伟亚,等.基于分级控制的烟丝加香系统设计[J].烟草科技,2017,50(8):97-102.
7. [7]
  张丽娜,许利平,樊虎,等.高精度自动化加料加香烘丝一体化微型设备的研制和应用[J].中国烟草学报,2018,24(4):27-34.
8. [8]
  刘穗君,杨甦.基于PID控制的烟丝加香控制系统改进[J].自动化应用,2015(7):32-34.
9. [9]
  张桂林,李锋,耿云飞.基于增量式PID控制的空气热源泵供水机温度控制系统设计[J].计算机与数字工程,2021,49(2):268-271
  ,321.
10. [10]
  何磊,梁健,俞嘉琳,等.滴流床反应器内喷射型分布器的雾化和均布性能[J].石油化工,2021,50(10):1045-1051.
11. [11]
  李淑江,李程前,沈敏敏.基于FLUENT的气液两相流喷嘴雾化性能研究[J].轻工机械,2021,39(6):81-85.
12. [12]
  钱俊兵,潘楠,潘地林,等.两相流喷嘴雾化空间粒径分布研究[J].电子测量技术,2020,43(21):77-83.
13. [13]
  MUNDO C,SOMMERFELD M,TROPEA C.On the modeling of liquid sprays impinging on surfaces[J].Atomization&Sprays,1998,8(6):625-652.
14. [14]
  MUNDO C,SOMMERFELD M,TROPEA C.Droplet-wall collisions:Experimental studies of the deformation and breakup process[J].International Journal of Multiphase Flow,1995,21(2):151-173.
15. [15]
  史春涛,周颖,张宝如,等.喷雾模型的发展及其在内燃机CFD中的应用[J].拖拉机与农用运输车,2006,33(2):39-42.
16. [16]
  刘金琨.先进PID控制及其MATLAB仿真[M].北京:电子工业出版社,2003.
17. [17]
  宋安然,周德廉,刘艳梨.基于增量式PID控制的锅炉温控系统设计[J].电子测量技术,2021,44(6):11-16.
18. [18]
  黄绪勇,王欣,唐标,等.基于增量式PID算法的变电站设备巡检机器人控制系统研究[J].机械与电子,2023,41(8):24-28.
19. [19]
  孙建民,刘祥,赵国浩,等.模糊反馈增量式比例积分微分油气悬架控制[J].科学技术与工程,2021,21(34):14814-14820.
20. [20]
  张继成,严士超,纪文义,等.基于增量式PID算法的多种固体肥精确施控系统研究[J].农业机械学报,2021,52(3):99-106.
21. [21]
  高慧中,路骏,马小录.基于增量式PID算法的气体流量控制方法[J].鱼雷技术,2016,24(2):132-136.
22. [22]
  尤晓娟,何红梅,刘献军,等.基于静态顶空-GC/MS的加热卷烟用滤嘴载香颗粒评价研究[J].中国烟草学报,2022,28(1):8-16.
23. [23]
  许蔼飞,章平泉,范忠,等.用气相色谱法同时测定薄荷型卷烟滤嘴中的薄荷醇、三乙酸甘油酯和烟碱含量[J].轻工学报,2018,33(5):53-59.
1. [1]
  郭华诚 , 胡仙妹 , 高尊华 , 李金周 , 王红霞 . 针辊式烟丝结构调控设备参数变化对细支烟卷制品质的影响. 轻工学报, 2024, 39(2): 122-126. doi: 10.12187/2024.02.016
2. [2]
  沙云菲 , 熊骏威 , 费婷 , 吴达 , 任爽 , 蒋汶 . 烟草废弃物提取物的双水相萃取及其化妆品功效研究. 轻工学报, 2024, 39(2): 80-86,93. doi: 10.12187/2024.02.010
3. [3]
  方亦成 , 杨菁 , 陆诚玮 , 冯奇 , 汪旭 . 基于层次分析法的加热卷烟感官评价指标筛选及其权重建立. 轻工学报, 2024, 39(2): 107-113. doi: 10.12187/2024.02.014
4. [4]
  田金虎 , 袁颖 , 卢昕博 , 汤晓东 , 潘力 , 王雨凝 , 叶兴乾 , 蒋健 . 微波预处理对加热卷烟用烤烟烟叶常规化学成分及挥发性香气成分的影响. 轻工学报, 2024, 39(2): 69-79. doi: 10.12187/2024.02.009

点击查看大图

计量

PDF下载量: 2
文章访问数: 89
引证文献数: 0

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

罗亮, 师东方, 朱鲜艳, 等. 基于增量式PID算法的香精施加系统设计[J]. 轻工学报, 2024, 39(2): 114-121. doi: 10.12187/2024.02.015

引用本文: 罗亮, 师东方, 朱鲜艳, 等. 基于增量式PID算法的香精施加系统设计[J]. 轻工学报, 2024, 39(2): 114-121. doi: 10.12187/2024.02.015

LUO Liang, SHI Dongfang, ZHU Xianyan, et al. Flavoring system design based on incremental PID algorithm[J]. Journal of Light Industry, 2024, 39(2): 114-121. doi: 10.12187/2024.02.015

Citation: LUO Liang, SHI Dongfang, ZHU Xianyan, et al. Flavoring system design based on incremental PID algorithm[J]. Journal of Light Industry, 2024, 39(2): 114-121. doi: 10.12187/2024.02.015

基于增量式PID算法的香精施加系统设计

作者简介:罗亮(1988-),男,湖南省益阳市人,南通烟滤嘴有限责任公司工程师,主要研究方向为烟草设备及滤棒研发。E-mail:luoliang203@163.com

1. 南通烟滤嘴有限责任公司研发中心, 江苏南通 226001;
2. 江苏中烟工业有限责任公司技术中心, 江苏南京 210019

收稿日期: 2023-05-26
录用日期: 2023-10-24

基金项目: 中国烟草总公司科技重大专项项目(110201901008(XX-08))江苏中烟工业有限责任公司科技项目(202205,202232,202233)

关键词:

摘要: 为解决加热不燃烧烟草制品生产过程中香精施加量无法根据薄片质量变化进行实时调控的问题,设计了一种基于增量式PID算法的香精施加系统。该系统由称重单元、螺杆泵、喷嘴、流量传感器等组成,通过称重单元实时获取薄片质量数据,根据理论计算模型确定香精施加量,基于增量式PID算法驱动螺杆泵定量输出香精至喷嘴中,利用流量传感器对香精施加量实时反馈,实现香精精准施加。验证结果表明,当薄片质量发生变化时,香精施加量可快速调整,最大超调量为1 %,最长调整时间为1.8 s,系统具有较好的跟踪性能;施加量检测值与理论值的偏移率为0.23 %~0.52 %,施加量组内波动为3.11 %~4.17 %,系统可实现香精的准确、均匀、稳定施加。

English Abstract

Flavoring system design based on incremental PID algorithm

1. R&D Center, Nantong Cigarette Filter Co., Ltd., Nantong 226001, China;
2. Technology Center, China Tobacco Jiangsu Industrial Co., Ltd., Nanjing 210019, China

Received Date: 2023-05-26
Accepted Date: 2023-10-24

Abstract: In order to solve the problem that the spray weight could not be adjusted and controlled according to the weight change of the tobacco sheet during the manufacturing process of heat-not-burn tobacco product in real time, a flavoring system was designed based on incremental PID algorithm. The flavoring system was composed of weighing unit, screw pumps, nozzles, and flow sensors. The weight of the tobacco sheet roll was obtained through the weighing unit in real time, then the spray weight was calculated according to the theoretical calculation model, and the screw pumps were driven to output target flow to the nozzles based on incremental PID algorithm, the real-time spray weight was got from the flow sensors, and at last tobacco flavor was sprayed on the tobacco sheet. The results showed that the spray weight could be adjusted and controlled according to the weight change of the tobacco sheet in real time, the maximum overshoot of the flavoring system was 1 %, and the maximum adjustment time was 1.8 s, the system had good tracking performance. The deviation ratio of the spray weight was 0.23 %~0.52 % between the detection value and the theoretical value, the variation of the spray weight within samples was 3.11 %~4.17 %. It showed that the flavoring system could realize accurate, uniform and stable application.

参考文献 (23) 相关文章 (4)