针辊式烟丝结构调控设备参数变化对细支烟卷制品质的影响

郭华诚; 胡仙妹; 高尊华; 李金周; 王红霞

doi:10.12187/2024.02.016

April 2024

Article Contents

GUO Huacheng, HU Xianmei, GAO Zunhua, et al. Influences of the pin-roll tobacco structure control equipment parameters on the rolling quality of slim cigarette[J]. Journal of Light Industry, 2024, 39(2): 122-126. doi: 10.12187/2024.02.016

Citation: GUO Huacheng, HU Xianmei, GAO Zunhua, et al. Influences of the pin-roll tobacco structure control equipment parameters on the rolling quality of slim cigarette[J]. Journal of Light Industry, 2024, 39(2): 122-126. doi: 10.12187/2024.02.016 shu

Influences of the pin-roll tobacco structure control equipment parameters on the rolling quality of slim cigarette

1. China Tobacco Henan Industrial Co., Ltd., Zhengzhou 450016, China;
2. College of Food and Bioengineering, Zhengzhou University of Light Industry, Zhengzhou 450001, China

Received Date: 2023-04-19
Accepted Date: 2023-07-07

Abstract

Using single quality standard deviation, suction resistance standard deviation, total ventilation rate standard deviation, end thread amount, and end content as indicators, an orthogonal experiment was designed with three parameters:wire selection needle roller motor frequency, wire breakage needle roller motor frequency, and wire selection needle roller spacing, to study the effect of parameter changes in pin-roll tobacco structure control equipment on the rolling quality of fine cigarette production. The results showed that the frequency of the wire selection needle roller motor was a key factor affecting the standard deviation of the total ventilation rate and single cigarette weight; the frequency of the wire breakage needle roller motor was a key factor affecting the standard deviation of suction resistance and the amount of wire at the end; the distance between the wire selection needle rollers was a key factor affecting the end content. The optimal parameters for regulating the equipment were the frequency of the wire selection needle roller motor at 33 Hz, the frequency of the wire breakage needle roller motor at 45 Hz, and the spacing between the wire selection needle rollers at 45 mm. After regulation, the long cut tobacco rate decreased by 14.39 %, while the medium and short cut tobacco rates increased by 26.01 % and 20.09 %, with little change in the broken tobacco rate. After rolling, there was no significant change in the physical indicators of fine cigarettes, but the standard deviation of single cigarette quality, suction resistance, and total ventilation rate decreased by more than 30 %. The end tobacco content and end tobacco content decreased by 61.79 % and 36.42 %, respectively. The stability of fine cigarette rolling was efficiently improved.
- cut tobacco structure,
- pin-roll tobacco structure control equipment,
- motor frequency,
- needle roller spacing,
- slim cigarette,
- rolling quality
References
1. [1]
  王夏婷,潘文,邹泉,等.2种叶片成丝方式对细支卷烟质量的影响[J].安徽农业科学,2018,46(23):177-180.
2. [2]
  FORD A,MOODIE C,MACKINTOSH A M,et al.Adolescent perceptions of cigarette appearance[J].European Journal of Public Health,2014,24(3):464-468.
3. [3]
  孙东亮,张大波,李艳,等.烟丝长度及其混料配比对细支卷烟质量特性的影响[J].烟草科技,2019,52(11):87-95.
4. [4]
  李善莲,申晓锋,李华杰,等.烟丝结构对卷烟端部落丝量的影响[J].烟草科技,2010(2):5-7.
5. [5]
  楚晗,范磊,王天怡,等.基于短支卷烟物理质量稳定的烟丝尺寸优化设计[J].食品与机械,2019,35(6):212-215.
6. [6]
  李洪涛,杨成.基于混料均匀设计的细支烟烟丝尺寸优化[J].济南大学学报(自然科学版),2018,32(2):146-149.
7. [7]
  朱成文,郝喜良,沈晓晨,等.定长切丝技术在细支卷烟生产中的应用[J].烟草科技,2019,52(3):86-91.
8. [8]
  郭华诚,杨雪鹏,郜海民,等.一种新型烟丝结构靶向调控设备研发及运行参数优化[J].轻工学报,2023,38(4):122-126.
9. [9]
  国家烟草专卖局.卷烟烟丝结构的测定:YC/T 289-2009[S].北京:中国标准出版社,2009.
10. [10]
  中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.卷烟和滤棒物理性能的测定第4部分卷烟质量:GB/T 22838.4-2009[S].北京:中国标准出版社,2009.
11. [11]
  中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.卷烟和滤棒物理性能的测定第17部分:卷烟端部落掉落烟丝的测定振动法:GB/T 22838.17-2009[S].北京:中国标准出版社,2009.
12. [12]
  中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.卷烟和滤棒物理性能的测定第7部分卷烟含末率:GB/T 22838.7-2009[S].北京:中国标准出版社,2009.
13. [13]
  中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.卷烟和滤棒物理性能的测定第5部分卷烟吸阻和滤棒:GB/T 22838.5-2009[S].北京:中国标准出版社,2009.
14. [14]
  中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.卷烟和滤棒物理性能的测定第15部分卷烟通风的测定定义和测量原理:GB/T 22838.15-2009[S].北京:中国标准出版社,2009.
15. [15]
  王震,游敏,李青,等.柔性断丝技术在细支卷烟生产中的应用[J].烟草科技,2021,54(10):63-69.
Proportional views

Get Citation

PDF

XML

Article Metrics

Article views(89) PDF downloads(3) Cited by()

Ralated

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Influences of the pin-roll tobacco structure control equipment parameters on the rolling quality of slim cigarette

Abstract

References

Proportional views

Article Metrics

Ralated

Proportional views

通讯作者: 陈斌, bchen63@163.com