JOURNAL OF LIGHT INDUSTRY

CN 41-1437/TS  ISSN 2096-1553

纵扭型超声电机的研发进展与现存问题

陶征 ,  赵淳生

downloadPDF
陶征, 赵淳生. 纵扭型超声电机的研发进展与现存问题[J]. 轻工学报, 2011, 26(4): 63-67. doi: 10.3969/j.issn.1004-1478.2011.04.014
引用本文: 陶征, 赵淳生. 纵扭型超声电机的研发进展与现存问题[J]. 轻工学报, 2011, 26(4): 63-67. doi: 10.3969/j.issn.1004-1478.2011.04.014
shu
TAO Zheng and ZHAO Chun-sheng. Development and existing problems of longitudinal and torsional hybrid type ultrasonic motors[J]. Journal of Light Industry, 2011, 26(4): 63-67. doi: 10.3969/j.issn.1004-1478.2011.04.014
Citation: TAO Zheng and ZHAO Chun-sheng. Development and existing problems of longitudinal and torsional hybrid type ultrasonic motors[J]. Journal of Light Industry, 2011, 26(4): 63-67. doi: 10.3969/j.issn.1004-1478.2011.04.014
shu

纵扭型超声电机的研发进展与现存问题

  • 郑州大学 机械工程学院, 河南 郑州 450001;

  • 南京航空航天大学 精密驱动研究所, 江苏 南京 210016

  • 基金项目: 国家自然科学基金项目(10874090)

  • 中图分类号: TM359.9

Development and existing problems of longitudinal and torsional hybrid type ultrasonic motors

  • School of Mech. Eng., Zhengzhou Univ., Zhengzhou 450001, China;

  • Precision Driving Lab., Nanjing Univ. of Aero. and Astro., Nanjing 210016, China

  • Received Date: 2011-01-04
    Available Online: 2011-07-15

    CLC number: TM359.9

  • 摘要: 超声电机是基于全新原理具有全新结构的高技术电机产品,而纵扭型超声电机更因其具有更大的扭矩、更好的可控性而备受业界重视从而成为研究热点.从1980年代末的纵扭复合型超声电机到最具代表性的模态转换型超声电机,国内外纵扭型超声电机的研制虽不断推陈出新,但由于研究历史尚短,理论上、技术上尚不成熟,其所面对的理论问题、摩擦磨损问题、预压力弹簧性能问题、电机结构改进问题亟待解决.
    Abstract: The ultrasonic motors are high products which have the fire-new structure based on fire-new theory.The longitudinal-torsional ultrasonic motors have become an research issue bccause they have larger momental and better controllability.The research of the longitudinal-torsional ultrasonic motors begin from the compound longitudinal-torsional ultrasonic motors at the end of 1980s and developed into the modal transformation ultrasonic motor,one of the most representative motors.Though they develped quickly,the research history of longitudinal-torsional ultrasonic motors is shorter.So they are not ripe in theory and technology.Problems of theory,friction and wear,preloading spring performance and motor structure development will become the research emphasis in the future.
    1. [1]

      王矜奉,姜祖桐,石瑞大.压电振动[M].北京:科学出版社,1989.

    2. [2]

      Schoenwald J S, Beckham P M, Rattner R A,et al. Exploi ting solid state ultrasonic motors for robotics[C]//Ultra sonics Symposium IEEE, Chicago:IL, 1988:513-517.

    3. [3]

      Flynn A M,Tavrow L S,Bart S F,et al. Piezoelectric mi cromotors for microrobots[J]. J of Micro Electr Mech Syst, 1992(1):44.

    4. [4]

      Kentaro Nakamura, Minoru Kurosawa,Sadayuki Ueha. Char acteristics of a hybrid transducer-type ultrasonic motor[J]. IEEE Trans on Ultrasonics Ferroelectrics and Fre quency Control, 1991,38(3):189.

    5. [5]

      Kentaro Nakamura,Sadayuki Ueha. Performances of a hy brid transducer type ultrasonic motor as a function of the size[C]//IEEE Ultrasonic Symposium, Cannes:[s. n.], 1994:557-560.

    6. [6]

      Jun Satonobu, Norikazu Torh, Kentaro Nakamura, et al. Construction of megatorque hybrid transducer type[J]. Motors J Appl Phys, 1996,35(9B):5038.

    7. [7]

      Yoshiro Tomikawa, Kazunari Adachi, Manabu Aoyagi. Some constructions and characteristics of rod type piezoelectric ultrasonic motor using longitudinal and torsional vibrations[J]. IEEE Trans on Ultrasonics Ferroeletrics and Fre quency Control, 1992,39(5):600.

    8. [8]

      Jiromaru Tsujino,Atsuyuki Suzuki. Load characteristics of ultrasonic motor with a longitudinal-torsional converter va rious nonlinear springs for inducing static pressure[C]//IEEE Ultrasonics Symposium, Atlanta:GA, 2001:545-550.

    9. [9]

      Jiromaru Tsujino, Ryo Suzuki, Hideyuki Yasojima. Load characteristics of ultrasonic rotary motor using a longitudi nal-torsional vibration converter[C]//IEEE Ultrasonics Symposium, San Antonio:TX, 1996:377-382.

    10. [10]

      Jiromaru Tsujino, Takako Uchida, Katsuhisa Yamano. Ul trasonic plastic welding using two 27 kHz complex vibra tion systems[C]//IEEE Ultrasonics Symposium, Toron to:Ont, 1997:855-859.

    11. [11]

      赵衡兵,刘晓东,陈永校,等.大扭矩超声波电机的结构分析[J].微特电机,1999,27(4):15.

    12. [12]

      孙合明,赵淳生,朱晓东,等.纵扭型压电超声电机的设计及有限元分析[J].微电机,2002,35(4):7.

    13. [13]

      赵淳生.超声电机技术与应用[M].北京:科学出版社,2007.

    14. [14]

      孙合明,赵淳生,朱晓东,等.纵扭复合型超声波电机的实验研究[J].微特电机,2002,30(4):3.

    15. [15]

    16. [16]

      刘一声.压电超声波电机及其应用[J].压电与声光, 1988,10(6):60.

    17. [17]

      Yoseph Bar-Cohen, Nesbitt Hagood W, Argelio Olivers M,et al. Development of an ultrasonic solid state motor for space applications[C]//A Proposal to the JPL Directors Discretionsry Fund FY'94, Boston:MIT, 1994:1-11.

    18. [18]

      王大春.表面波型电机(二)[J].压电与声光,1986,8(2):1.

    1. [1]

      张嫚 , 张国治 , 张康逸 , 何梦影 . 超声辅助酶解法制备小麦ACE抑制肽及其稳定性研究. 轻工学报, 2024, 0(0): -.

    2. [2]

      张嫚 , 张国治 , 张康逸 , 何梦影 . 超声辅助酶解法制备小麦ACE抑制肽及其稳定性研究. 轻工学报, 2024, 39(5): 29-39. doi: 10.12187/2024.05.004

    3. [3]

      贾尚羲 , 张怡雪 , 石盼盼 , 王昱 , 李可 . 不同时长超声波处理对鹰嘴豆分离蛋白乳化液稳定性的影响. 轻工学报, 2024, 39(5): 40-49. doi: 10.12187/2024.05.005

  • 加载中
WeChat 点击查看大图
计量
  • PDF下载量:  21
  • 文章访问数:  692
  • 引证文献数: 0
文章相关
  • 收稿日期:  2011-01-04
  • 刊出日期:  2011-07-15
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索
陶征, 赵淳生. 纵扭型超声电机的研发进展与现存问题[J]. 轻工学报, 2011, 26(4): 63-67. doi: 10.3969/j.issn.1004-1478.2011.04.014
引用本文: 陶征, 赵淳生. 纵扭型超声电机的研发进展与现存问题[J]. 轻工学报, 2011, 26(4): 63-67. doi: 10.3969/j.issn.1004-1478.2011.04.014
shu
TAO Zheng and ZHAO Chun-sheng. Development and existing problems of longitudinal and torsional hybrid type ultrasonic motors[J]. Journal of Light Industry, 2011, 26(4): 63-67. doi: 10.3969/j.issn.1004-1478.2011.04.014
Citation: TAO Zheng and ZHAO Chun-sheng. Development and existing problems of longitudinal and torsional hybrid type ultrasonic motors[J]. Journal of Light Industry, 2011, 26(4): 63-67. doi: 10.3969/j.issn.1004-1478.2011.04.014
shu

纵扭型超声电机的研发进展与现存问题

  • 郑州大学 机械工程学院, 河南 郑州 450001;
  • 南京航空航天大学 精密驱动研究所, 江苏 南京 210016
  • 收稿日期: 2011-01-04
  • 网络出版日期: 2011-07-15
基金项目:  国家自然科学基金项目(10874090)

摘要: 超声电机是基于全新原理具有全新结构的高技术电机产品,而纵扭型超声电机更因其具有更大的扭矩、更好的可控性而备受业界重视从而成为研究热点.从1980年代末的纵扭复合型超声电机到最具代表性的模态转换型超声电机,国内外纵扭型超声电机的研制虽不断推陈出新,但由于研究历史尚短,理论上、技术上尚不成熟,其所面对的理论问题、摩擦磨损问题、预压力弹簧性能问题、电机结构改进问题亟待解决.

English Abstract

参考文献 (18) 相关文章 (3)

目录

/

返回文章

网站版权 © 轻工学报编辑部

地址：河南省郑州市科学大道136号邮编：450001

本系统由北京仁和汇智信息技术有限公司开发 技术支持： info@rhhz.net