某单兵搬运雷达天线座结构设计

朱晓凯; 李俊伟; 张丽敏

doi:10.3969/j.issn.2095-476X.2014.03.016

CN 41-1437/TS ISSN 2096-1553

某单兵搬运雷达天线座结构设计

朱晓凯 , 李俊伟 , 张丽敏

朱晓凯, 李俊伟, 张丽敏. 某单兵搬运雷达天线座结构设计[J]. 轻工学报, 2014, 29(3): 68-71. doi: 10.3969/j.issn.2095-476X.2014.03.016

引用本文: 朱晓凯, 李俊伟, 张丽敏. 某单兵搬运雷达天线座结构设计[J]. 轻工学报, 2014, 29(3): 68-71. doi: 10.3969/j.issn.2095-476X.2014.03.016

ZHU Xiao-kai, LI Jun-wei and ZHANG Li-min. Structure design of antenna pedestal of single soldier carrying radar[J]. Journal of Light Industry, 2014, 29(3): 68-71. doi: 10.3969/j.issn.2095-476X.2014.03.016

Citation: ZHU Xiao-kai, LI Jun-wei and ZHANG Li-min. Structure design of antenna pedestal of single soldier carrying radar[J]. Journal of Light Industry, 2014, 29(3): 68-71. doi: 10.3969/j.issn.2095-476X.2014.03.016

某单兵搬运雷达天线座结构设计

中国电子科技集团公司第二十七研究所, 河南郑州 450047
中图分类号: TN957.8

Structure design of antenna pedestal of single soldier carrying radar

The 27 th Research Institute of CETC, Zhengzhou 450047, China
Received Date: 2014-01-14
Available Online: 2014-05-15
CLC number: TN957.8

摘要: 研究了一种拆装方便并可单兵搬运的新型俯仰-方位天线座:采用转台式方位座和可重复拆装俯仰转台,从而满足拆分后单体质量要求.通过有限元方法分析天线座结构时忽略螺钉、销钉、平键等连接件,关键部位采用理论公式校核以保证其连接强度.结果表明,天线座结构合理,力学性能满足使用要求.
- 雷达天线座 /
- 强度 /
- 刚度 /
- 结构设计 /
- 单兵搬运
Abstract: The structure of a new type of elevation-azimuth antenna pedestal which is convenient in disassembly or assembly and can be carried by single soldier was studied. Rotary table azimuth rotating pedestal and repeatably assembled pitching turntable were used in order to meet the mass requirement of every part disassembled. While the structure of the antenna pedestal was analyzed by using the finite element method, some joints like screws, pins and flat keys were neglected and the key joints were checked by theoretical formula to ensure its connection strength. The results showed that the structure of the antenna pedestal was reasonable and its mechanical property also met the use requirements.
- antenna pedestal of radar /
- strength /
- rigidity /
- structure design /
- single soldier carrying
1. [1]
  彭天志.复合材料在雷达天馈系统结构设计中的应用[J].纤维复合材料,2008(2):18.
2. [2]
  吴凤高.天线座结构设计[M].西安:西北电讯工程学院出版社,1986:9-12.
3. [3]
  张腊梅.某地面雷达天线座设计[J].电子机械工程,2007,23(5):27.
4. [4]
  陈君.舰载搜索雷达天线座结构设计探讨[J].机械工程师,2011(1):128.
5. [5]
  廖伯瑜.现代机械动力学及其工程应用[M].北京:机械工业出版社,2003:24-25.
6. [6]
  陈玉振,周勤.基于ANSYS的雷达结构强度分析[J].电子机械工程,2011,27(1):50.
7. [7]
  陈铁鸣.机械设计[M].哈尔滨:哈尔滨工业大学出版社,1998:31-60.
1. [1]
  卢晓波 , 徐海 , 朱俊召 , 张宇 , 谭健 , 高冠男 , 胡军华 , 林龙 . 基于机器视觉的加热卷烟烟支端部质量检测系统设计. 轻工学报, 2024, 0(0): -.
2. [2]
  胡新楠 , 朱成凯 , 胡中泽 , 纪执立 , 金伟平 , 郭城 , 沈汪洋 . 复配比对明胶-羟丙基甲基纤维素双水相体系微观结构和流变特性的影响. 轻工学报, 2024, 0(0): -.