ZHU Xiao-kai, LI Jun-wei and ZHANG Li-min. Structure design of antenna pedestal of single soldier carrying radar[J]. Journal of Light Industry, 2014, 29(3): 68-71. doi: 10.3969/j.issn.2095-476X.2014.03.016
Citation:
ZHU Xiao-kai, LI Jun-wei and ZHANG Li-min. Structure design of antenna pedestal of single soldier carrying radar[J]. Journal of Light Industry, 2014, 29(3): 68-71.
doi:
10.3969/j.issn.2095-476X.2014.03.016
Structure design of antenna pedestal of single soldier carrying radar
-
Received Date:
2014-01-14
Available Online:
2014-05-15
-
Abstract
The structure of a new type of elevation-azimuth antenna pedestal which is convenient in disassembly or assembly and can be carried by single soldier was studied. Rotary table azimuth rotating pedestal and repeatably assembled pitching turntable were used in order to meet the mass requirement of every part disassembled. While the structure of the antenna pedestal was analyzed by using the finite element method, some joints like screws, pins and flat keys were neglected and the key joints were checked by theoretical formula to ensure its connection strength. The results showed that the structure of the antenna pedestal was reasonable and its mechanical property also met the use requirements.
-
-
References
-
[1]
彭天志.复合材料在雷达天馈系统结构设计中的应用[J].纤维复合材料,2008(2):18.
-
[2]
吴凤高.天线座结构设计[M].西安:西北电讯工程学院出版社,1986:9-12.
-
[3]
张腊梅.某地面雷达天线座设计[J].电子机械工程,2007,23(5):27.
-
[4]
陈君.舰载搜索雷达天线座结构设计探讨[J].机械工程师,2011(1):128.
-
[5]
廖伯瑜.现代机械动力学及其工程应用[M].北京:机械工业出版社,2003:24-25.
-
[6]
陈玉振,周勤.基于ANSYS的雷达结构强度分析[J].电子机械工程,2011,27(1):50.
-
[7]
陈铁鸣.机械设计[M].哈尔滨:哈尔滨工业大学出版社,1998:31-60.
-
Proportional views
-
-