在线激光打孔卷烟通风率与卷烟理化指标的关系
The relationship between ventilation rate and physicochemical indicator of cigarette made by online laser punching
-
摘要: 利用在线激光打孔设备制作通风率不同的混合型卷烟和烤烟型卷烟,考察通风率对两种卷烟物理指标、常规烟气释放量的影响.结果表明:两种卷烟的总通风率、滤嘴通风率均与卷烟质量呈正相关,与吸阻呈负相关,且通风率越高,滤嘴通风率对总通风率的贡献越大;两种卷烟的总通风率、滤嘴通风率均与烟气烟碱、焦油和CO释放量呈显著负相关,影响大小依次为CO释放量> 焦油释放量> 烟碱释放量.根据卷烟烟气指标设计,可先计算总通风率,再通过调整在线激光打孔参数来满足卷烟产品设计要求.Abstract: In order to observe the effect of ventilation on cigarette physical and chemical properties, blended type and Virginia type cigarettes were made by online laser punching equipment. The results showed that ventilation rate of the two types of cigarettes was positively related with cigarette weight, and negatively related with cigarette resistance. The higher the ventilation rate was, the more the filter ventilation rate contributed to the total ventilation rate. The two types of cigarettes ventilation rate and filter ventilation rate had negative correlation with the release of nicotine, tar and carbon monoxide. Carbon monoxide was most affected, followed by tar, and nicotine was least affected. Once the cigarette properties were fixed, ventilation rate could be calculated firstly,then through adjusting the laser perforation parameters online, cigarette design demands could be met.
-
-
[1]
赵威,庞天河,刘艳芳,等.卷烟降焦减害技术研究进展[J].安徽农业科学,2006,34(22):5897.
-
[2]
-
[3]
云南烟草科学研究院."三纸一棒"的科学选用和设计在卷烟降焦减害中的应用研究[J].云南烟草,2003(2):14.
-
[4]
杨国荣,李忠任,许健,等.卷烟减害降焦技术的研究进展[J].云南化工,2009,36(2):44.
-
[5]
赵乐,彭斌,于川芳,等.辅助材料设计参数对卷烟7种烟气有害成分释放量的影响[J].烟草科技,2012(10):46.
-
[6]
彭斌,孙学辉,尚平平,等.辅助材料设计参数对烤烟型卷烟烟气焦油、烟碱和CO释放量的影响[J].烟草科技,2012(2):61.
-
[7]
黄晓飞,姚二民.烟支通风率控制参数研究[J].郑州轻工业学院学报:自然科学版,2013,28(5):43.
-
[8]
于川芳,罗登山,王芳,等.卷烟"三纸一棒"对烟气特征及感官质量的影响(一)[J].中国烟草学报,2001,7(2):1.
-
[9]
魏玉玲,胡群,王建,等.材料多因素对30 mm滤嘴长卷烟通风率的影响[J].郑州轻工业学院学报:自然科学版,2008,23(4):19.
-
[10]
江威,李斌,于川芳.卷烟纸透气度对卷烟年燃烧温度分布的影响[J].烟草科技,2007(9):5.
-
[11]
罗凤明,邱劲飚,李明华,等.如何使用统计软件SPSS进行回归分析[J].电脑知识与技术,2008(2):293.
-
[12]
张文彤.SPSS统计分析高级教程[M].北京:高等教育出版社,2004.
-
[1]
-
点击查看大图
计量
- PDF下载量: 53
- 文章访问数: 1004
- 引证文献数: 0
下载:
