多毛细管静电雾化模式实验研究

王贞涛; 夏磊; 张永辉; 钱怡松; 顾利定; 邱乾胜

doi:10.3969/j.issn.2096-1553.2018.01.012

CN 41-1437/TS ISSN 2096-1553

多毛细管静电雾化模式实验研究

王贞涛 , 夏磊 , 张永辉 , 钱怡松 , 顾利定 , 邱乾胜

王贞涛, 夏磊, 张永辉, 等. 多毛细管静电雾化模式实验研究[J]. 轻工学报, 2018, 33(1): 96-103. doi: 10.3969/j.issn.2096-1553.2018.01.012

引用本文: 王贞涛, 夏磊, 张永辉, 等. 多毛细管静电雾化模式实验研究[J]. 轻工学报, 2018, 33(1): 96-103. doi: 10.3969/j.issn.2096-1553.2018.01.012

WANG Zhentao, XIA Lei, ZHANG Yonghui, et al. Experimental study on electro-spraying modes from multi-capillary[J]. Journal of Light Industry, 2018, 33(1): 96-103. doi: 10.3969/j.issn.2096-1553.2018.01.012

Citation: WANG Zhentao, XIA Lei, ZHANG Yonghui, et al. Experimental study on electro-spraying modes from multi-capillary[J]. Journal of Light Industry, 2018, 33(1): 96-103. doi: 10.3969/j.issn.2096-1553.2018.01.012

多毛细管静电雾化模式实验研究

洁华控股股份有限公司博士后科研工作站, 浙江海宁 314419;
江苏大学能源与动力工程学院, 江苏镇江 212013
基金项目: 国家自然科学基金项目（51106064）；江苏大学青年基金扶持计划项目（FCJJ2015001）；江苏大学青年骨干教师培养工程项目；江苏省高校优势学科建设工程项目
中图分类号: TK018

Experimental study on electro-spraying modes from multi-capillary

Postdoctoral Scientific Research Workstation, Jiehua Holdings Co., Ltd., Haining 314419, China;
School of Energy and Power Engineering, Jiangsu University, Zhenjiang 212013, China
Received Date: 2016-11-25
Accepted Date: 2017-08-30
Available Online: 2018-01-15
CLC number: TK018

摘要: 采用高速数码摄像技术，通过图像对比与分析，获得了无水乙醇的一些多毛细管静电雾化模式，依据无量纲流量α和静电Bond数β对这些模式进行分类，结果表明：与单毛细管静电雾化模式相似，在多毛细管静电雾化模式出现了滴状、纺锤、射流及多股射流等雾化模式，并随着电压与流量的增加依次出现转变；同时由于毛细管、射流之间的库仑力作用，两股射流呈现对称向外倾斜分布.随着静电Bond数值的增大，两种多毛细管出现纺锤和脉动射流模式的重复频率增多，且两种模式的摆动幅度随之减小，当静电Bond数值增大到某一值时，纺锤模式将会转变为脉动射流模式；当静电Bond数值继续增大时，两种多毛细管均产生多股射流模式，且其射流数目随着静电Bond数值的增加而有所增多.
- 多毛细管 /
- 静电雾化模式 /
- 无量纲流量α /
- 静电Bond数β
Abstract: High speed digital camera was used to record eletrohydrodynamics spraying modes of multi-capillary with ethanol. The spraying modes of multi-capillary were obtained by analyzing the pictures, and the effect of operating parameters on electro-spraying modes was discussed. The spraying modes with two configurations were classified by the dimensionless parameter flow (α) and electric Bond number (β). The experimental results indicated that similar to spraying mode of mono-capillary,dripping, spindle, jet and multi-jet modes could be observed in spraying mode of multi-capillary. The modes could transits from one mode to another with varying applied voltage and flow rate. The two jets from double-capillary showed symmetrical skewed distribution due to Coulomb repulsive forces between them. Although there are different configurations for two kinds of capillaries, the spindle and pulsated jet modes could be observed. For these two modes, the frequency of spindle and pulsated jet ejected from the capillary would also increased and the swing range of the spindle and jet would reduce with an increase in electric Bond number. The transition from spindle to pulsated jet mode would be observed at a critical electric Bond number. With electric Bond number further increased, the multi-jet mode would be observed for two configurations. The number of jet increased with an increase in electrical Bond number.
- multi-capillary /
- electro-spraying mode /
- non-dimensional flow α /
- electric Bond number β
1. [1]
  王贞涛,毛惠敏,罗惕乾.锥-射流模式下毛细管静电雾化流场的PIV测量[J].农业机械学报,2010,8(41):62.
2. [2]
  JAWOREK A,SOBCZYK A T.Electrospraying route to nanotechnology:an overview[J].Journal of Electrostatics,2008,66(3-4):197.
3. [3]
  FILLMORE G L,BUEHNER W L,WEST D L.Drop charging and deflection in an electrostatic ink jet Printer[J].IBM Journal of Research and Development,1977,21(1):37.
4. [4]
  ZELENY J.On the conditions of instability of liquid drops with applications to the electrical discharge from liquid point[J].Pro Camb Phil Soc,1915,18:71.
5. [5]
  ZELENY J.Instability of electrified liquid surfaces[J].Phys Rev,1917,10(1):1.
6. [6]
  BOCANEGRA R,GALAN D,MARQUEZ M,et al.Multiple electrospray emitted from an array of holes[J].Journal of Aerosol Science,2005,36(12):1387.
7. [7]
  DENG W,KLEMIC J F,LI X,et al.Increase of electrospray throughput using multiplexed mictofabricatedsources for the scalable generation of monoodisperse droplets[J].Journal of Aerosol Science,2006,37(6):696.
8. [8]
  VELASQUEZ-GARCIA L F,AKINWANDE A I.A micro-fabricated linear array of electorspray emitters for thruster applications[J].Microelectromech Syst,2006,15(5):1260.
9. [9]
  SIA B Q T,BYUNA D,LEE S.Experimental and theoretical study of a cone-jet for an electrospraymicrothruster considering the interference effect in an array of nozzles[J].Journal of Aerosol Science,2007,38(9):924.
10. [10]
  OH H,KIM K,KIM S.Characterization of deposition patterns produced by twin-nozzle electrospray[J].Journal of Aerosol Science,2008,39(9):801.
11. [11]
  刘明明,陈效鹏,徐晓建.多毛细管电雾化喷洒模式及稳定喷洒特征研究[J].力学学报,2010,42(3):567.
12. [12]
  陈效鹏,董绍彤,程久生,等.电雾化装置及雾化模型研究[J].实验力学,2000,15(1):97.
13. [13]
  陈效鹏,王清华.多毛细管稳定喷洒电雾化特征研究(一)——实验设备设计及粒径测量方法[J].实验力学,2011,26(6):692.
14. [14]
  王清华,陈效鹏,赵梦华.多毛细管稳定喷洒电雾化特征研究(二)——电压、电流、粒径与流量的关系[J].实验力学,2012,27(1):102.
15. [15]
  FERNANDEZ DE LA MORA,LOSCERTALES I G.The current emitted by highly conducting Taylor cones[J].Journal of Fluid Mechanics,1994,260:155.

点击查看大图

计量

PDF下载量: 153
文章访问数: 8915
引证文献数: 0

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

王贞涛, 夏磊, 张永辉, 等. 多毛细管静电雾化模式实验研究[J]. 轻工学报, 2018, 33(1): 96-103. doi: 10.3969/j.issn.2096-1553.2018.01.012

引用本文: 王贞涛, 夏磊, 张永辉, 等. 多毛细管静电雾化模式实验研究[J]. 轻工学报, 2018, 33(1): 96-103. doi: 10.3969/j.issn.2096-1553.2018.01.012

多毛细管静电雾化模式实验研究

洁华控股股份有限公司博士后科研工作站, 浙江海宁 314419;
江苏大学能源与动力工程学院, 江苏镇江 212013

收稿日期: 2016-11-25
录用日期: 2017-08-30
网络出版日期: 2018-01-15

基金项目: 国家自然科学基金项目（51106064）；江苏大学青年基金扶持计划项目（FCJJ2015001）；江苏大学青年骨干教师培养工程项目；江苏省高校优势学科建设工程项目

关键词:

摘要: 采用高速数码摄像技术，通过图像对比与分析，获得了无水乙醇的一些多毛细管静电雾化模式，依据无量纲流量α和静电Bond数β对这些模式进行分类，结果表明：与单毛细管静电雾化模式相似，在多毛细管静电雾化模式出现了滴状、纺锤、射流及多股射流等雾化模式，并随着电压与流量的增加依次出现转变；同时由于毛细管、射流之间的库仑力作用，两股射流呈现对称向外倾斜分布.随着静电Bond数值的增大，两种多毛细管出现纺锤和脉动射流模式的重复频率增多，且两种模式的摆动幅度随之减小，当静电Bond数值增大到某一值时，纺锤模式将会转变为脉动射流模式；当静电Bond数值继续增大时，两种多毛细管均产生多股射流模式，且其射流数目随着静电Bond数值的增加而有所增多.

English Abstract

Experimental study on electro-spraying modes from multi-capillary

Postdoctoral Scientific Research Workstation, Jiehua Holdings Co., Ltd., Haining 314419, China;
School of Energy and Power Engineering, Jiangsu University, Zhenjiang 212013, China

Received Date: 2016-11-25
Accepted Date: 2017-08-30
Available Online: 2018-01-15

Abstract: High speed digital camera was used to record eletrohydrodynamics spraying modes of multi-capillary with ethanol. The spraying modes of multi-capillary were obtained by analyzing the pictures, and the effect of operating parameters on electro-spraying modes was discussed. The spraying modes with two configurations were classified by the dimensionless parameter flow (α) and electric Bond number (β). The experimental results indicated that similar to spraying mode of mono-capillary,dripping, spindle, jet and multi-jet modes could be observed in spraying mode of multi-capillary. The modes could transits from one mode to another with varying applied voltage and flow rate. The two jets from double-capillary showed symmetrical skewed distribution due to Coulomb repulsive forces between them. Although there are different configurations for two kinds of capillaries, the spindle and pulsated jet modes could be observed. For these two modes, the frequency of spindle and pulsated jet ejected from the capillary would also increased and the swing range of the spindle and jet would reduce with an increase in electric Bond number. The transition from spindle to pulsated jet mode would be observed at a critical electric Bond number. With electric Bond number further increased, the multi-jet mode would be observed for two configurations. The number of jet increased with an increase in electrical Bond number.

参考文献 (15)