基于固含量的成品卷烟接装胶施胶量测定及其与滤嘴通风率关系研究

王贝; 王建民; 张晶; 马晓伟; 冯欣; 曲国福; 胡建洪

doi:10.3969/j.issn.2096-1553.2019.06.005

CN 41-1437/TS ISSN 2096-1553

王贝 , 王建民 , 张晶 , 马晓伟 , 冯欣 , 曲国福 , 胡建洪

王贝, 王建民, 张晶, 等. 基于固含量的成品卷烟接装胶施胶量测定及其与滤嘴通风率关系研究[J]. 轻工学报, 2019, 34(6): 33-39. doi: 10.3969/j.issn.2096-1553.2019.06.005

引用本文: 王贝, 王建民, 张晶, 等. 基于固含量的成品卷烟接装胶施胶量测定及其与滤嘴通风率关系研究[J]. 轻工学报, 2019, 34(6): 33-39. doi: 10.3969/j.issn.2096-1553.2019.06.005

WANG Bei, WANG Jianmin, ZHANG Jing, et al. Determination of the sizing amount of tipping glue to the finished cigarettes based on solid content and its effect on filter ventilation rate[J]. Journal of Light Industry, 2019, 34(6): 33-39. doi: 10.3969/j.issn.2096-1553.2019.06.005

Citation: WANG Bei, WANG Jianmin, ZHANG Jing, et al. Determination of the sizing amount of tipping glue to the finished cigarettes based on solid content and its effect on filter ventilation rate[J]. Journal of Light Industry, 2019, 34(6): 33-39. doi: 10.3969/j.issn.2096-1553.2019.06.005

基于固含量的成品卷烟接装胶施胶量测定及其与滤嘴通风率关系研究

1. 郑州轻工业大学食品与生物工程学院, 河南郑州 450001;
2. 云南中烟红塔集团, 云南玉溪 653100

作者简介: 王贝(1995-),女,河南省林州市人,郑州轻工业大学硕士研究生,主要研究方向为卷烟加工工艺.;

基金项目: 云南省红塔烟草集团有限责任公司研究项目（2018JC01）
中图分类号: TS452

Determination of the sizing amount of tipping glue to the finished cigarettes based on solid content and its effect on filter ventilation rate

1. College of Food and Bioengineering, Zhengzhou University of Light Industry, Zhengzhou 450001, China;
2. Yunnan China Tobacco Hongta Group, Yuxi 653100, China
Received Date: 2019-09-03

CLC number: TS452

摘要: 为实现成品卷烟中接装胶施胶量的直接测定，建立了基于固含量的接装胶施胶量测定方法，对测定条件进行优化，并研究了影响施胶量的因素及施胶量与滤嘴通风率间关系，结果表明：1）在检测烟支数为20支，烘干温度为100℃，烘干时间为2 h的优化条件下，该方法精密度较高、重复性较好，并且能够有效区分不同生产条件下接装胶施胶量的微小差异，可应用于对成品卷烟施胶量的检测与评价；2）接装胶施胶量随喷胶压力升高而增加、随车速升高而减少，施胶量与滤嘴通风率呈显著负相关.因此，控制施胶量有利于提高滤嘴通风率的稳定性，进而提升卷烟生产均质化水平.
- 成品卷烟 /
- 接装胶施胶量 /
- 固含量 /
- 滤嘴通风率
Abstract: In order to realize the determination of the sizing amount of tipping glue to the finished cigarette,the factors affecting the sizing amount of tipping glue and the relationship with the ventilation rate of the filter were studied in depth,and the glue based on the cementing content in the cigarette was established. The determination factors were optimized,and the sizing amount measurement method was determined based on the solid content of glue.The results showed that this method had high precision and good repeatability, and could effectively distinguish the difference in the sizing amount with different production conditions under the number of cigarette 20,drying temperature 100℃ and drying time 2 h,which could be applied to the detection and evaluation of the sizing amount of finished cigarettes.The sizing amount of tipping glue increased with the pressure of the glue,and decreased with the increase of the speed.There was a significant negative correlation between the sizing amount of tipping glue and the ventilation rate of the filter. Therefore,the formulation of the sizing amount control standard is conducive to improving the stability of the filter ventilation rate and further improve the homogenization level in cigarette prduction.
- finished cigarette /
- the sizing amount of tipping glue /
- solid content /
- filter ventilation rate
1. [1]
  王爱成.一种卷烟机供胶装置:201120539349.4[P].2012-09-05.
2. [2]
  鲁才略.卷烟搭口上胶装置:200820082431.7[P].2008-11-19.
3. [3]
  高明奇,冯晓民,李明哲,等.一种测量单支卷烟接装胶上胶量的方法:201510210894.1[P].2015-07-22.
4. [4]
  舒奎武,李宪成,于帅,等.卷烟机产生烟支表面水渍、黄斑问题分析与处理[J].轻工科技,2015(12):69.
5. [5]
  姚二民,郭乃伟,张超帅,等.接装纸涂胶量对卷烟滤嘴通风率的影响[J].湖北农业科学,2016,55(19):5161.
6. [6]
  钦华.电容式卷烟机水松纸在线上胶量检测装置[J].科技视界,2013(21):74.
7. [7]
  叶松涛.接装纸涂胶在线检测及剔除系统的设计应用[J].烟草科技,2012(3):25.
8. [8]
  常敏,张平,周军,等.利用光谱技术快速检测烟胶的研究[J].应用激光,2011,31(1):86.
9. [9]
  邢军,李晓辉,唐纲岭,等.一种确定通风卷烟滤嘴上打孔接装纸未施胶区域的方法:200710193094.9[P].2008-05-14.
10. [10]
  夏营威,严志景,范黎.等.卷烟接装纸涂胶位置检测方法:201510659480.7[P].2015-12-23.
11. [11]
  张晶,马晓伟,冯欣,等.接装胶及接装纸种类对胶水渗透性的影响[J].食品与机械,2018,34(6):98.
1. [1]
  刘广超 , 邓莎 , 高峄涵 , 吴涛 , 邓锐杰 . 加热卷烟辊压法薄片丝吸湿性影响因素研究. 轻工学报, 2024, 39(5): 109-117. doi: 10.12187/2024.05.013
2. [2]
  卢晓波 , 徐海 , 朱俊召 , 张宇 , 谭健 , 高冠男 , 胡军华 , 林龙 . 基于机器视觉的加热卷烟烟支端部质量检测系统设计. 轻工学报, 2024, 0(0): -.
3. [3]
  张改红 , 许航 , 杜帅 , 徐月莹 , 石栋栋 , 薛晶晶 , 尚紫博 , 毛多斌 . 麦芽酚-β-D-葡萄糖苷的稳定性及其在卷烟加香中的应用. 轻工学报, 2024, 39(5): 102-108. doi: 10.12187/2024.05.012
4. [4]
  张建栋 , 杨忠泮 , 吴恋恋 , 徐大勇 , 朱萍 , 张雯晶 , 堵劲松 . 基于高光谱成像及机器学习的烟叶糖料液施加量判别模型. 轻工学报, 2024, 39(5): 86-94. doi: 10.12187/2024.05.010

点击查看大图

计量

PDF下载量: 10
文章访问数: 1082
引证文献数: 0

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

基于固含量的成品卷烟接装胶施胶量测定及其与滤嘴通风率关系研究

作者简介:王贝(1995-),女,河南省林州市人,郑州轻工业大学硕士研究生,主要研究方向为卷烟加工工艺.

1. 郑州轻工业大学食品与生物工程学院, 河南郑州 450001;
2. 云南中烟红塔集团, 云南玉溪 653100

收稿日期: 2019-09-03

基金项目: 云南省红塔烟草集团有限责任公司研究项目（2018JC01）

关键词:

摘要: 为实现成品卷烟中接装胶施胶量的直接测定，建立了基于固含量的接装胶施胶量测定方法，对测定条件进行优化，并研究了影响施胶量的因素及施胶量与滤嘴通风率间关系，结果表明：1）在检测烟支数为20支，烘干温度为100℃，烘干时间为2 h的优化条件下，该方法精密度较高、重复性较好，并且能够有效区分不同生产条件下接装胶施胶量的微小差异，可应用于对成品卷烟施胶量的检测与评价；2）接装胶施胶量随喷胶压力升高而增加、随车速升高而减少，施胶量与滤嘴通风率呈显著负相关.因此，控制施胶量有利于提高滤嘴通风率的稳定性，进而提升卷烟生产均质化水平.

English Abstract

Determination of the sizing amount of tipping glue to the finished cigarettes based on solid content and its effect on filter ventilation rate

1. College of Food and Bioengineering, Zhengzhou University of Light Industry, Zhengzhou 450001, China;
2. Yunnan China Tobacco Hongta Group, Yuxi 653100, China

Received Date: 2019-09-03

Abstract: In order to realize the determination of the sizing amount of tipping glue to the finished cigarette,the factors affecting the sizing amount of tipping glue and the relationship with the ventilation rate of the filter were studied in depth,and the glue based on the cementing content in the cigarette was established. The determination factors were optimized,and the sizing amount measurement method was determined based on the solid content of glue.The results showed that this method had high precision and good repeatability, and could effectively distinguish the difference in the sizing amount with different production conditions under the number of cigarette 20,drying temperature 100℃ and drying time 2 h,which could be applied to the detection and evaluation of the sizing amount of finished cigarettes.The sizing amount of tipping glue increased with the pressure of the glue,and decreased with the increase of the speed.There was a significant negative correlation between the sizing amount of tipping glue and the ventilation rate of the filter. Therefore,the formulation of the sizing amount control standard is conducive to improving the stability of the filter ventilation rate and further improve the homogenization level in cigarette prduction.

参考文献 (11) 相关文章 (4)