多种约束下大型矩形纺丝箱的热-固耦合分析

王垒智; 董金善; 孙存旭

doi:10.3969/j.issn.2096-1553.2019.02.013

CN 41-1437/TS ISSN 2096-1553

王垒智 , 董金善 , 孙存旭

王垒智, 董金善, 孙存旭. 多种约束下大型矩形纺丝箱的热-固耦合分析[J]. 轻工学报, 2019, 34(2): 95-101. doi: 10.3969/j.issn.2096-1553.2019.02.013

引用本文: 王垒智, 董金善, 孙存旭. 多种约束下大型矩形纺丝箱的热-固耦合分析[J]. 轻工学报, 2019, 34(2): 95-101. doi: 10.3969/j.issn.2096-1553.2019.02.013

WANG Leizhi, DONG Jinshan and SUN Cunxu. Thermosetting-coupling analysis of large rectangular spinning box under multiple constraints[J]. Journal of Light Industry, 2019, 34(2): 95-101. doi: 10.3969/j.issn.2096-1553.2019.02.013

Citation: WANG Leizhi, DONG Jinshan and SUN Cunxu. Thermosetting-coupling analysis of large rectangular spinning box under multiple constraints[J]. Journal of Light Industry, 2019, 34(2): 95-101. doi: 10.3969/j.issn.2096-1553.2019.02.013

多种约束下大型矩形纺丝箱的热-固耦合分析

南京工业大学机械与动力工程学院, 江苏南京 211816

作者简介: 王垒智(1992-),男,河南省安阳市人,南京工业大学硕士研究生,主要研究方向为过程装备分析设计与优化技术、过程装备缺陷评定与再制造技术.;

中图分类号: TS103.6

Thermosetting-coupling analysis of large rectangular spinning box under multiple constraints

College of Mechanical and Power Engineering, Nanjing Tech University, Nanjing 211816, China
Received Date: 2018-08-13

CLC number: TS103.6

摘要: 针对大型矩形纺丝箱体的热应力对支座处产生影响的问题，以某公司12位联苯气相加热大型纺丝箱体作为研究对象，对矩形纺丝箱整体结构进行ANSYS有限元分析，研究设置支架对纺丝箱支座处温度变化的影响规律，采用间接法考察其支座在不同种类约束下热-固耦合的热应力变化规律.结果表明：支座通过支架散热更快，支座区域存在较大的温度梯度；纺丝箱最大热应力出现在箱体支座的螺栓孔处，组件圈的温度梯度较小；在全约束下支座的热应力最大，当温度梯度小于10℃时，支座的热应力大小不受约束变化的影响.进行工程设计时，可选用隔热性能优良的保温材料，适当调节纺丝箱不同支座处的螺栓松紧性，有效降低热应力，保障设备安全运行.
- 矩形纺丝箱 /
- 热-固耦合 /
- 热应力 /
- 约束
Abstract: Aiming at the problem that the thermal stress of the large rectangular spinning box affects the support, taking the 12-bit biphenyl gas-phase heating large spinning box of a company as the research object, the ANSYS finite element analysis of the whole structure of the rectangular spinning box was carried out, the influence of the support on the temperature variation law of the support was studied, and the thermal stress variation of the support under different external constraints was analyzed. The results showed that the heat dissipation of the support through the support was faster than that in the air. Even if the insulation layer was added to the support and the support surface, there was still a large temperature gradient in the support area. For spinning box, the maximum thermal stress occured at the bolt hole of the box support, the thermal stress at the four corners of the pump seat was more obvious, and the temperature gradient of the spinning box assembly ring was smaller. When the temperature gradient was less than 10℃, the thermal stress of the support was not affected by the change of the constraint.When the engineering design apply, the material with good thermal insulation properties is selected and the ability of bolt tightness is adjusted properly in order to reduce thermal stress and ensure the safe operation of equipment.
- rectangular spinning box /
- thermosetting-coupling /
- thermal stress /
- constraint
1. [1]
  余若伟,王辉,井佳音.FDY纺丝牵伸机纺丝箱的设计[J].纺织科学研究,1997(2):5.
2. [2]
  余若伟.熔融纺用纺丝箱的强度设计及计算方法的探讨[J].纺织机械,2011(3):14.
3. [3]
  蒙文.纺丝箱应力分析和强度评定[J].石油化工设备技术,2009(5):23.
4. [4]
  冯顺亮.聚苯硫醚纺丝箱强度设计的探讨[J].纺织机械,2011(2):32.
5. [5]
  寿比南,杨国义,徐峰,等.GB/T 150-2011《压力容器》标准释义[M].北京:新华出版社,2012.
6. [6]
  原全国压力容器标准化技术委员会.钢制压力容器应力分析设计标准:JB/T 4732-1995(2005年确认)[S].北京:中国机械工业出版社,1995.
7. [7]
  张季,赵国忠,张皓,等.基于精细螺栓模型的爆破阀热固耦合密封性能分析[J].压力容器,2018,35(2):13.
8. [8]
  郝宗凯.600MW汽轮机转子应力应变热固耦合数值分析[D].北京:华北电力大学,2013.
9. [9]
  徐朝阳,孙士恩.基于ANSYS的凝汽器管板大温差热固耦合分析[J].汽轮机技术,2017,59(5):351.
10. [10]
  龚金科,何伟,钟超,等.基于热固耦合的柴油机气缸盖有限元分析[J].湖南大学学报(自然科学版),2017,44(2):34.
11. [11]
  何平,刘雪芬,刘正国,等.纺织机械压力容器的强度分析[J].纺织学报,1993(4):35.
1. [1]
  章存勇 , 庄海锋 , 时雅琪 , 邹鹏 , 丁乃红 , 纵坤 , 贾良元 , 郭东锋 . 国内外雪茄烟叶热解产物差异性研究. 轻工学报, 2024, 0(0): -.
2. [2]
  章存勇 , 庄海锋 , 时雅琪 , 邹鹏 , 丁乃红 , 纵坤 , 贾良元 , 郭东锋 . 国内外雪茄烟叶热解产物差异性研究. 轻工学报, 2024, 39(5): 118-126. doi: 10.12187/2024.05.014

点击查看大图

计量

PDF下载量: 4
文章访问数: 1528
引证文献数: 0

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

王垒智, 董金善, 孙存旭. 多种约束下大型矩形纺丝箱的热-固耦合分析[J]. 轻工学报, 2019, 34(2): 95-101. doi: 10.3969/j.issn.2096-1553.2019.02.013

引用本文: 王垒智, 董金善, 孙存旭. 多种约束下大型矩形纺丝箱的热-固耦合分析[J]. 轻工学报, 2019, 34(2): 95-101. doi: 10.3969/j.issn.2096-1553.2019.02.013

多种约束下大型矩形纺丝箱的热-固耦合分析

作者简介:王垒智(1992-),男,河南省安阳市人,南京工业大学硕士研究生,主要研究方向为过程装备分析设计与优化技术、过程装备缺陷评定与再制造技术.

南京工业大学机械与动力工程学院, 江苏南京 211816

收稿日期: 2018-08-13

关键词:

摘要: 针对大型矩形纺丝箱体的热应力对支座处产生影响的问题，以某公司12位联苯气相加热大型纺丝箱体作为研究对象，对矩形纺丝箱整体结构进行ANSYS有限元分析，研究设置支架对纺丝箱支座处温度变化的影响规律，采用间接法考察其支座在不同种类约束下热-固耦合的热应力变化规律.结果表明：支座通过支架散热更快，支座区域存在较大的温度梯度；纺丝箱最大热应力出现在箱体支座的螺栓孔处，组件圈的温度梯度较小；在全约束下支座的热应力最大，当温度梯度小于10℃时，支座的热应力大小不受约束变化的影响.进行工程设计时，可选用隔热性能优良的保温材料，适当调节纺丝箱不同支座处的螺栓松紧性，有效降低热应力，保障设备安全运行.

English Abstract

Thermosetting-coupling analysis of large rectangular spinning box under multiple constraints

College of Mechanical and Power Engineering, Nanjing Tech University, Nanjing 211816, China

Received Date: 2018-08-13

Abstract: Aiming at the problem that the thermal stress of the large rectangular spinning box affects the support, taking the 12-bit biphenyl gas-phase heating large spinning box of a company as the research object, the ANSYS finite element analysis of the whole structure of the rectangular spinning box was carried out, the influence of the support on the temperature variation law of the support was studied, and the thermal stress variation of the support under different external constraints was analyzed. The results showed that the heat dissipation of the support through the support was faster than that in the air. Even if the insulation layer was added to the support and the support surface, there was still a large temperature gradient in the support area. For spinning box, the maximum thermal stress occured at the bolt hole of the box support, the thermal stress at the four corners of the pump seat was more obvious, and the temperature gradient of the spinning box assembly ring was smaller. When the temperature gradient was less than 10℃, the thermal stress of the support was not affected by the change of the constraint.When the engineering design apply, the material with good thermal insulation properties is selected and the ability of bolt tightness is adjusted properly in order to reduce thermal stress and ensure the safe operation of equipment.

参考文献 (11) 相关文章 (2)