JOURNAL OF LIGHT INDUSTRY

CN 41-1437/TS  ISSN 2096-1553

基于有限元方法的纵切机床自适应同步回转导套机构的优化设计

陈鹿民 ,  谭跃奎 ,  黄俊

downloadPDF
陈鹿民, 谭跃奎, 黄俊. 基于有限元方法的纵切机床自适应同步回转导套机构的优化设计[J]. 轻工学报, 2016, 31(3): 57-62,73. doi: 10.3969/j.issn.2096-1553.2016.3.008
引用本文: 陈鹿民, 谭跃奎, 黄俊. 基于有限元方法的纵切机床自适应同步回转导套机构的优化设计[J]. 轻工学报, 2016, 31(3): 57-62,73. doi: 10.3969/j.issn.2096-1553.2016.3.008
shu
CHEN Lu-min, TAN Yue-kui and HUANG Jun. Optimization design of adaptive synchronous ratary guide sleeve mechanism of Swiss type machine tool based on finite element method[J]. Journal of Light Industry, 2016, 31(3): 57-62,73. doi: 10.3969/j.issn.2096-1553.2016.3.008
Citation: CHEN Lu-min, TAN Yue-kui and HUANG Jun. Optimization design of adaptive synchronous ratary guide sleeve mechanism of Swiss type machine tool based on finite element method[J]. Journal of Light Industry, 2016, 31(3): 57-62,73. doi: 10.3969/j.issn.2096-1553.2016.3.008
shu

基于有限元方法的纵切机床自适应同步回转导套机构的优化设计

  • 郑州轻工业学院 机电工程学院, 河南 郑州 450002;

  • 昶扬电线电缆有限公司 精机事业部, 广东 东莞 523525

  • 中图分类号: TP202

Optimization design of adaptive synchronous ratary guide sleeve mechanism of Swiss type machine tool based on finite element method

  • College of Mechanical and Electrical Engineering, Zhengzhou University of Light Industry, Zhengzhou 450002, China;

  • Precision Machine Division, Changyang Wire and Cable Co., Ltd., Dongguan 523525, China

  • Received Date: 2016-01-04
    Available Online: 2016-05-15

    CLC number: TP202

  • 摘要: 针对数控纵切机床中普通导套机构无法实时消除由棒料直径公差引起的导套与棒料之间存在间隙,加工工件易产生挠曲变形的问题,优化设计了一种自适应同步回转导套机构:通过ABAQUS建立弹簧夹头的有限元模型并进行仿真,得到多项式拟合曲线,将拟合曲线与Matlab中的Fmincon优化算法结合,确定了碟形弹簧的结构参数,从而使工件的挠曲变形程度降低了35.71%.
    Abstract: For CNC Swiss type machine tool, conventional guide sleeve mechanism can not eliminate the gap between the guide sleeve and the bar material which is caused by the diameter tolerance of the bar material in real time, and brings problem of bending deformation of machining workpiece. The research came up with a kind of adaptive synchronous rotary guide mechanism in optimization design:By ABAQUS software, the research established finite element model about spring collect and simulation and obtained polynomial fitting curve. Then fitting curve was combined with the Fmincon optimization algorithm in Matlab to determine the structure parameters of the disc spring. Compare to conventional guide sleeve, the deflection of the workpiece was reduced by 35.71%.
    1. [1]

      李斌.数控纵切机床CAD/CAM自动编程方案的设计[D].成都:四川大学,2006.

    2. [2]

      王志宏,殷国富,米良,等.数控纵切车床电主轴数字化设计分析系统研究[J].工具技术,2010,44(5):67.

    3. [3]

      林晓旭,张洪庆,姚宇.数控纵切机床整机布局研究[J].机械工程师,2014(3):190.

    4. [4]

      林晓旭,王喆.纵切机床导套关键技术研究[J].制造技术与机床,2014(11):59.

    5. [5]

      CHENG E H,TSAI T L,LIN M J,et al.Study of using internal thread whirling in machining titanium dental implant[J].Applied Mechanics and Materials,2013,268-270:436.

    6. [6]

      CHENG E H,TSAI T L. Study on machining dental implants by whirling approach[C]//Materials and Computational Mechanics, Pts 1-3, Zurich:Trans Tech Publications Ltd,2012:1506-1513.

    7. [7]

      LIN K Y, CHEN Y H. Synchronous polygon turning for implant manufacturing[C]//ASME Conf Proc,Pennsylvania:ASME Press,2010:101-109.

    8. [8]

      张国智.精密机床主轴弹簧夹头夹紧力计算方法研究[J].机床与液压,2014(8):44.

    9. [9]

      吴晓波.碟形弹簧的力学性能研究[D].郑州:郑州大学,2007.

  • 加载中
WeChat 点击查看大图
计量
  • PDF下载量:  58
  • 文章访问数:  925
  • 引证文献数: 0
文章相关
  • 收稿日期:  2016-01-04
  • 刊出日期:  2016-05-15
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索
陈鹿民, 谭跃奎, 黄俊. 基于有限元方法的纵切机床自适应同步回转导套机构的优化设计[J]. 轻工学报, 2016, 31(3): 57-62,73. doi: 10.3969/j.issn.2096-1553.2016.3.008
引用本文: 陈鹿民, 谭跃奎, 黄俊. 基于有限元方法的纵切机床自适应同步回转导套机构的优化设计[J]. 轻工学报, 2016, 31(3): 57-62,73. doi: 10.3969/j.issn.2096-1553.2016.3.008
shu
CHEN Lu-min, TAN Yue-kui and HUANG Jun. Optimization design of adaptive synchronous ratary guide sleeve mechanism of Swiss type machine tool based on finite element method[J]. Journal of Light Industry, 2016, 31(3): 57-62,73. doi: 10.3969/j.issn.2096-1553.2016.3.008
Citation: CHEN Lu-min, TAN Yue-kui and HUANG Jun. Optimization design of adaptive synchronous ratary guide sleeve mechanism of Swiss type machine tool based on finite element method[J]. Journal of Light Industry, 2016, 31(3): 57-62,73. doi: 10.3969/j.issn.2096-1553.2016.3.008
shu

基于有限元方法的纵切机床自适应同步回转导套机构的优化设计

  • 郑州轻工业学院 机电工程学院, 河南 郑州 450002;
  • 昶扬电线电缆有限公司 精机事业部, 广东 东莞 523525
  • 收稿日期: 2016-01-04
  • 网络出版日期: 2016-05-15

摘要: 针对数控纵切机床中普通导套机构无法实时消除由棒料直径公差引起的导套与棒料之间存在间隙,加工工件易产生挠曲变形的问题,优化设计了一种自适应同步回转导套机构:通过ABAQUS建立弹簧夹头的有限元模型并进行仿真,得到多项式拟合曲线,将拟合曲线与Matlab中的Fmincon优化算法结合,确定了碟形弹簧的结构参数,从而使工件的挠曲变形程度降低了35.71%.

English Abstract

参考文献 (9)

目录

/

返回文章

网站版权 © 轻工学报编辑部

地址：河南省郑州市科学大道136号邮编：450001

本系统由北京仁和汇智信息技术有限公司开发 技术支持： info@rhhz.net