用于VCM钢板单向拉伸实验的数字散斑相关法应变检测

张德海; 刘吉彬

doi:10.3969/j.issn.1004-1478.2012.02.012

CN 41-1437/TS ISSN 2096-1553

用于VCM钢板单向拉伸实验的数字散斑相关法应变检测

张德海 , 刘吉彬

张德海, 刘吉彬. 用于VCM钢板单向拉伸实验的数字散斑相关法应变检测[J]. 轻工学报, 2012, 27(2): 50-54. doi: 10.3969/j.issn.1004-1478.2012.02.012

引用本文: 张德海, 刘吉彬. 用于VCM钢板单向拉伸实验的数字散斑相关法应变检测[J]. 轻工学报, 2012, 27(2): 50-54. doi: 10.3969/j.issn.1004-1478.2012.02.012

ZHANG De-hai and LIU Ji-bin. Strain detection of uniaxial tensile experiment of VCM multi-layer sheet using digital speckle correlation method[J]. Journal of Light Industry, 2012, 27(2): 50-54. doi: 10.3969/j.issn.1004-1478.2012.02.012

Citation: ZHANG De-hai and LIU Ji-bin. Strain detection of uniaxial tensile experiment of VCM multi-layer sheet using digital speckle correlation method[J]. Journal of Light Industry, 2012, 27(2): 50-54. doi: 10.3969/j.issn.1004-1478.2012.02.012

用于VCM钢板单向拉伸实验的数字散斑相关法应变检测

张德海 ,
刘吉彬

郑州轻工业学院机电工程学院, 河南郑州 450002
基金项目: 郑州轻工业学院博士科研基金资助项目
国家自然科学基金项目(50905012)
中图分类号: O436.1;TG386.32

Strain detection of uniaxial tensile experiment of VCM multi-layer sheet using digital speckle correlation method

ZHANG De-hai ,
LIU Ji-bin

College of Mech. and Electr. Eng., Zhengzhou Univ. of Light Ind., Zhengzhou 450002, China
Received Date: 2011-10-22
Available Online: 2012-03-15
CLC number: O436.1;TG386.32

摘要: 针对板料传统拉伸实验中应变获取仅限于拉伸断裂之后的数值等问题,应用数字散斑测量技术计算了应变,分别以深冲VCM钢板、非深冲VCM钢板及其组分材料为研究对象进行了单向拉伸实验,应用XJTUDIC散斑测量设备进行了同步检测,获得了材料沿x向、y向2个方向的应变数据,并以5种材料的轧制45°方向试样为例,分析了5种材料沿x向、y向2个方向的应变关系.结果表明:2种VCM钢板的应变能力明显优于2种钢板基板,非深冲VCM钢板和深冲VCM钢板x向的最大应变为68.743%和48.632%,y向的最大应变为-2.657%和-15.381%,其力学性能介于钢板与VCM薄膜之间,其中深冲VCM钢板的力学性能要优于非深冲VCM钢板.
- 数字散斑相关方法 /
- 应变检测 /
- VCM钢板 /
- 拉伸实验
Abstract: Digital speckle correlation method (DSCM) is introduced to solve the challenging problems such as that the strain is obtained on the time of failure during the traditional experimental process of sheet tensile mechanical properties.The calculations of strain were deduced using DSCM.The corresponding strains along x and y direction were obtained from uniaxial tension experiments.Synchronous detection was carried out application of XJTUDIC speckle measurement equipment,using the VCM deep-drawing multi-layer sheet,VCM non-deep drawing multi-layer sheet and their component material sheets as the targeted experimental objects,respectively.The relationships along both directions of the VCM multi-layer sheet and substrate and clad were analyzed from five kinds of material sample located rolling 45° direction.The results showed that strain of VCM multi-layer sheet was being improved after the file VCM clad was added using the three-dimensional speckle measurement technique.The maximum strains along x direction of VCM non-deep drawing multi-layer sheet and the VCM deep-drawing multi-layer sheet were 68.743% and 48.632%,y direction were -2.657% and -15.381% respectively.The mechanical properties of the VCM multi-layer sheet were between the mechanical properties of the substrate and film.The mechanical properties of the VCM deep-drawing multiple layers sheet was superior to those of the VCM non-deep drawing multi-layer sheet.
- digital speckle correlation method (DSCM) /
- strain detection /
- VCM multi-layer sheet /
- tensile experiment
1. [1]
  金观昌,孟利波,陈俊达,等.数字散斑相关技术进展及应用[J].试验力学,2006,21(6):689.
2. [2]
  Zhou P,Good K E.Subpixel displacement and deformation gradient measurement using digital image/speckle correlation (DISC)[J].Optical Eng,2001,48 (8):1613.
3. [3]
  朱猛,黄战华,王小军,等.显微动态散斑法测量压电陶瓷位移特征曲线[J].光学精密工程,2011,19(4):844.[JP]
4. [4]
  简龙晖,马少鹏,张军,等.基于小波多级分解的数字散斑相关搜索方法[J].清华大学学报:自然科学版,2003,43(5):680.
5. [5]
  Cehvalierl L,Calloch S,Hild F,et al.Digital image correlation used to analyze the multi-axial behavior of [JP3]rubber-like materials[J].Europen J of Mechanics-A/Solids,2001,20 (1):169.[JP]
6. [6]
  刘恒彪,周亚杰,王昌灵.双波长数字散斑相关法表面粗糙度测量[J].光学学报,2011,31(4):125.
7. [7]
  侯方,雷冬,龚兴龙.结合数码显微镜的数字散斑相关方法精度分析及应用[J].[JP]实验力学,2009,24(4):269.
8. [8]
  孙艳玲,赵东,高继河.数字散斑相关方法在木材断裂力学上的应用分析[J].北京林业大学学报,2009,31(S1):206.
9. [9]
  许蔚,孟庆杰,李俊.功能梯度材料的数字散斑相关方法实验研究[J].哈尔滨工业大学学报,2008,40(9):1408.
10. [10]
  李新忠,岱钦,王希军,等.多尺度小波降噪的数字散斑相关搜索[J].光学精密工程,2007,15(1):57.
11. [11]
  周文静,于瀛洁.基于光纤的三维电子散斑干涉测量系统设计[J].光学精密工程,2008,16(10):1815.
1. [1]
  吴晓东 , 刘畅 , 李俊 , 胡良志 , 贺凌晨 , 袁海霞 , 李强 , 黄锦标 . 基于高光谱检测的烟丝加香均匀性表征方法. 轻工学报, 2024, 39(5): 95-101. doi: 10.12187/2024.05.011
2. [2]
  卢晓波 , 徐海 , 朱俊召 , 张宇 , 谭健 , 高冠男 , 胡军华 , 林龙 . 基于机器视觉的加热卷烟烟支端部质量检测系统设计. 轻工学报, 2024, 0(0): -.
3. [3]
  张伟伟 , 姬远鹏 , 元春波 , 王君婷 , 齐晓任 , 张卫正 , 李萌 , 饶智 . 基于改进Mask R-CNN模型的粘连烟丝识别方法. 轻工学报, 2024, 39(5): 78-85. doi: 10.12187/2024.05.009
4. [4]
  李敏 , 贺姗姗 , 杨钰雯 . 改良QuEChERS方法结合超高效液相色谱测定火腿肠中杂环胺类化合物. 轻工学报, 2024, 39(5): 60-70. doi: 10.12187/2024.05.007

点击查看大图

计量

PDF下载量: 24
文章访问数: 862
引证文献数: 0

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

张德海, 刘吉彬. 用于VCM钢板单向拉伸实验的数字散斑相关法应变检测[J]. 轻工学报, 2012, 27(2): 50-54. doi: 10.3969/j.issn.1004-1478.2012.02.012

引用本文: 张德海, 刘吉彬. 用于VCM钢板单向拉伸实验的数字散斑相关法应变检测[J]. 轻工学报, 2012, 27(2): 50-54. doi: 10.3969/j.issn.1004-1478.2012.02.012

用于VCM钢板单向拉伸实验的数字散斑相关法应变检测

郑州轻工业学院机电工程学院, 河南郑州 450002

收稿日期: 2011-10-22
网络出版日期: 2012-03-15

基金项目: 郑州轻工业学院博士科研基金资助项目国家自然科学基金项目(50905012)

关键词:

摘要: 针对板料传统拉伸实验中应变获取仅限于拉伸断裂之后的数值等问题,应用数字散斑测量技术计算了应变,分别以深冲VCM钢板、非深冲VCM钢板及其组分材料为研究对象进行了单向拉伸实验,应用XJTUDIC散斑测量设备进行了同步检测,获得了材料沿x向、y向2个方向的应变数据,并以5种材料的轧制45°方向试样为例,分析了5种材料沿x向、y向2个方向的应变关系.结果表明:2种VCM钢板的应变能力明显优于2种钢板基板,非深冲VCM钢板和深冲VCM钢板x向的最大应变为68.743%和48.632%,y向的最大应变为-2.657%和-15.381%,其力学性能介于钢板与VCM薄膜之间,其中深冲VCM钢板的力学性能要优于非深冲VCM钢板.

English Abstract

Strain detection of uniaxial tensile experiment of VCM multi-layer sheet using digital speckle correlation method

College of Mech. and Electr. Eng., Zhengzhou Univ. of Light Ind., Zhengzhou 450002, China

Received Date: 2011-10-22
Available Online: 2012-03-15

Abstract: Digital speckle correlation method (DSCM) is introduced to solve the challenging problems such as that the strain is obtained on the time of failure during the traditional experimental process of sheet tensile mechanical properties.The calculations of strain were deduced using DSCM.The corresponding strains along x and y direction were obtained from uniaxial tension experiments.Synchronous detection was carried out application of XJTUDIC speckle measurement equipment,using the VCM deep-drawing multi-layer sheet,VCM non-deep drawing multi-layer sheet and their component material sheets as the targeted experimental objects,respectively.The relationships along both directions of the VCM multi-layer sheet and substrate and clad were analyzed from five kinds of material sample located rolling 45° direction.The results showed that strain of VCM multi-layer sheet was being improved after the file VCM clad was added using the three-dimensional speckle measurement technique.The maximum strains along x direction of VCM non-deep drawing multi-layer sheet and the VCM deep-drawing multi-layer sheet were 68.743% and 48.632%,y direction were -2.657% and -15.381% respectively.The mechanical properties of the VCM multi-layer sheet were between the mechanical properties of the substrate and film.The mechanical properties of the VCM deep-drawing multiple layers sheet was superior to those of the VCM non-deep drawing multi-layer sheet.