块体非晶合金摩擦磨损性能的影响因素与研究现状

王艳; 周向葵; 吴深

doi:10.12187/2021.04.012

块体非晶合金摩擦磨损性能的影响因素与研究现状

郑州轻工业大学机电工程学院, 河南郑州 450002

作者简介: 王艳(1988-),女,河南省商丘市人,郑州轻工业大学讲师,博士,主要研究方面为非晶合金、复合材料成形工艺及摩擦学行为.;

基金项目: 河南省科技攻关项目（212102210446）；河南省高等学校重点科研项目（19B430013）
中图分类号: TG146.1

Influential factors and research status on friction and wear performances of bulk amorphous alloys

College of Mechanical and Electrical Engineering, Zhengzhou University of Light Industry, Zhengzhou 450002, China
Received Date: 2020-05-06

CLC number: TG146.1

摘要: 通过分析块体非晶合金摩擦磨损过程的特点，总结了影响其摩擦磨损性能的主要因素，并从非晶合金与相应晶态合金对比、热处理和摩擦诱导晶化结构3个方面对其摩擦磨损性能研究现状进行阐述，指出：影响块体非晶合金摩擦磨损性能的主要因素为传热因素、配副材料和摩擦条件，且不同的影响因素之间相互关联、相互影响，即配副材料的热性能决定摩擦热导出速率，通过影响摩擦表面温度对摩擦过程产生影响，当摩擦条件改变时，非晶合金材料的稳定性发生变化，磨损量急剧增加或减小，从而影响其摩擦磨损性能.由于非晶合金的结构特点和摩擦磨损过程的特性，关于非晶合金与相应晶态材料摩擦磨损性能的对比研究，以及热处理和摩擦诱导晶化结构对块体非晶合金材料摩擦性能的影响研究中均存在矛盾性结论，需进一步研究非晶合金的结构与其摩擦磨损行为之间的关系，探究非晶合金磨损机制与转变规律，进而探索提升非晶合金耐磨性能的方法与途径.
- 块体非晶合金 /
- 摩擦磨损性能 /
- 影响因素 /
- 耐磨性能
Abstract: By analyzing the characteristics of the friction and wear process of bulk amorphous alloys, the main influencing factors of its friction and wear performances were summarized.The research status of the friction and wear performances of bulk amorphous alloys were also described from three aspects:the comparison of the friction and wear performances of amorphous alloys and the corresponding crystalline alloys, the effect of heat treatment and friction-induced crystallization structure on the friction and wear performances. It was pointed out that the main factors affecting the friction and wear performances of bulk amorphous alloys were heat transfer factors, counter-face materials and friction conditions, and the different influencing factors were interrelated and affected each other.The thermal properties of the counter-face materials determined export rate of the friction heat, and affected the friction process by affecting the friction surface temperature.When the friction conditions change, the stability of amorphous alloy materials was changed and the amount of wear increased or decreased sharply, thereby affecting its friction properties.Due to the characteristics of the structure and the friction and wear process of amorphous alloys, there were contradictory conclusions in research of the comparative study on the friction properties of amorphous alloys and corresponding crystalline materials, the effect of heat treatment and friction-induced crystallization structure on the friction properties of bulk amorphous alloy materials.It is necessary to further study the relationship between the structure of amorphous alloys and its tribological behaviors, explore the wear mechanism and its transformation laws.Then the methods and approach of improving the wear resistance of amorphous alloys were obtained.
- bulk amorphous alloy /
- friction and wear performance /
- influence factor /
- wear resistance
1. [1]
  WANG W H,DONG C,SHEK C H.Bulk metallic glasses[J].Materials Science & Engineering R:Reports,2004,44(2/3):45.
2. [2]
  LAI L M,DING K L,LIU T H,et al.Ternary Co-W-B bulk metallic glasses with ultrahigh strength[J].Journal of Non-Crystalline Solids,2020,544:120194.
3. [3]
  RASHIDI R,MALEKAN M,GHOLAMIPOUR R.Microstructure and mechanical properties of a Cu-Zr based bulk metallic glass containing atomic scale chemical heterogeneities[J].Materials Science and Engineering A,2018,729:433.
4. [4]
  KHAN M M,NEMATI A,RANMAN Z U,et al.Recent advancements in bulk metallic glasses and their applications:a review[J].Critical Reviews in Solid State and Materials Sciences,2018,43:233.
5. [5]
  HUA N B,CHEN W Z,WANG W G,et al.Tribological behavior of a Ni-free Zr-based bulk metallic glass with potential for biomedical applications[J].Materials Science and Engineering C,2016,66:268.
6. [6]
  汪卫华.非晶态物质的本质和特性[J].物理学进展,2013,33(5):177.
7. [7]
  ZHAI W,NIE L H,HUI X D,et al.Ultrasonic excitation induced nanocrystallization and toughening of Zr_46.75Cu_46.75Al_6.5 bulk metallic glass[J].Journal of Materials Science & Technology,2020,45:157.
8. [8]
  WANG T,SI J J,WU Y D,et al.Two-step work-hardening and its gigantic toughening effect in Zr-based bulk metallic glasses[J].Scripta Materialia,2018,150:106.
9. [9]
  AIHEMAITI N,LI Q,LI M C,et al.Preparation and properties of CoFeMoPB bulk metallic glasses[J].Intermetallics,2020,123:106834.
10. [10]
  LIU Y,PANG S J,YANG W,et al.Tribological behaviors of a Ni-free Ti-based bulk metallic glass in air and a simulated physiological environment[J].Journal of Alloys & Compounds,2018,766:1030.
11. [11]
  ZHOU K,CHEN C,LIU Y,et al.Effects of lutetium addition on formation,oxidation and tribological properties of a Zr-based bulk metallic glass[J].Intermetallics,2017,90:81.
12. [12]
  JIANG X F,SONG J J,FAN H Z,et al.Sliding friction and wear mechanisms of Cu₃₆Zr₄₈Ag₈Al₈ bulk metallic glass under different sliding conditions:dry sliding,deionized water,and NaOH corrosive solutions[J].Tribology International,2020,146:106211.
13. [13]
  WANG Y,CHEN W,WANG T,et al.Crystallization behavior of sub-surface in (Zr,Cu)₉₅Al₅ bulk metallic glass induced by different counter-face materials[J].Materials & Design,2016,111:213.
14. [14]
  TIAN P Y,KHUN N W,SHU B T,et al.Tribological behavior of Zr-based bulk metallic glass sliding against polymer,ceramic,and metal materials[J].Intermetallics,2015,61:1.
15. [15]
  FLEURY E,LEE S M,AHN H S,et al.Tribological properties of bulk metallic glasses[J].Materials Science & Engineering A,2004,375(1):276.
16. [16]
  FU X Y,KASAI T,FALK M L,et al.Sliding behavior of metallic glass (Part Ⅰ):experimental investigations[J].Wear,2001,250:409.
17. [17]
  ZHONG H,CHEN J,DAI LY,et al.Tribological behaviors of Zr-based bulk metallic glass versus Zr-based bulk metallic glass under relative heavy loads[J].Intermetallics,2015,65:88.
18. [18]
  TAO P J,YANG Y Z,RU Q.Effect of rotational sliding velocity on surface friction and wear behavior in Zr-based bulk metallic glass[J].Journal of Alloys & Compounds,2010,492(1/2):L36.
19. [19]
  RAHAMAN M L,ZHANG L C,RUAN H H.Effects of environmental temperature and sliding speed on the tribological behaviour of a Ti-based metallic glass[J].Intermetallics,2014,52(4):36.
20. [20]
  WU H,BAKER I,LIU Y,et al.Effects of environment on the sliding tribological behaviors of Zr-based bulk metallic glass[J].Intermetallics,2012,25(25):115.
21. [21]
  DUAN H T,WU Y,MENG H,et al.Tribological properties of Zr_41.25Ti_13.75Ni₁₀Cu_12.5Be_22.5 bulk metallic glasses under different conditions[J].Journal of Alloys & Compounds,2012,528(18):74.
22. [22]
  DUAN H T,TU J S,DU S M,et al.Tribological properties of Ti₄₀Zr₂₅Ni₈Cu₉Be₁₈ bulk metallic glasses under different conditions[J].Materials & Design,2011,32(32):4573.
23. [23]
  SAINIS,SRIVASTAVA A P,NEOGY S.The effect of Ag addition on the crystallization kinetics and glass forming ability of Zr-(CuAg)-Al bulk metallic glass[J].Journal of Alloys & Compounds,2019,772:961.
24. [24]
  ZHOU H B,PETERLECHNER M,HILKE S,et al.Influence of plastic deformation by high-pressure torsion on the crystallization kinetics of a Pd₄₀Ni₄₀P₂₀ bulk metallic glass[J].Journal of Alloys & Compounds,2020,821:153254.
25. [25]
  WU X L,LAN S,WEI X Y,et al.Elucidating the nature of crystallization kinetics in Zr₄₆Cu₄₆Al₈ metallic glass through simultaneous WAXS/SAXS measurements[J].Applied Physics Letters,2019,114:211903.
26. [26]
  WANG X,WEI X C,HONG X L,et al.Formation of sliding friction-induced deformation layer with nanocrystalline structure in T10 steel against 20CrMnTi steel[J].Applied Surface Science,2013,280(9):381.
27. [27]
  GLORIANT T.Microhardness and abrasive wear resistance of metallic glasses and nanostructured composite materials[J].Journal of Non-Crystalline Solids,2003,316(1):96.
28. [28]
  肖华星,陈光,喇培清.铁基大块非晶合金的摩擦磨损性能研究[J].摩擦学学报,2006,26(2):140.
29. [29]
  JI X L,HU B,LI Y X,et al.Sliding tribocorrosion behavior of bulk metallic glass against bearing steel in 3.5% NaCl solution[J].Tribology International,2015,91:214.
30. [30]
  JIN H W,AYER R,KOO J Y,et al.Reciprocating wear mechanisms in a Zr-based bulk metallic glass[J].Journal of Materials Research,2007,22(2):264.
31. [31]
  TAM C Y,SHEK C H.Abrasive wear of Cu₆₀Zr₃₀Ti₁₀ bulk metallic glass[J].Materials Science & Engineering A,2004,384(1/2):138.
32. [32]
  WANG Y,ZHAI H T,LI Q,et al.Effect of Co substitution for Fe on the non-isothermal crystallization kinetics of Fe₈₀P₁₃C₇ bulk metallic glasses[J].Thermochimica Acta,2019,675:107.
33. [33]
  MAKAROV A S,MITROFANOV Y P,KONCHAKOV R A,et al.Density and shear modulus changes occurring upon structural relaxation and crystallization of Zr-based bulk metallic glasses:in situ measurements and their interpretation[J].Journal of Non-Crystalline Solids,2019,521:119474.
34. [34]
  LOUZGUINE-LUZGIN D V,ZADOROZHNYY M Y,KETOV S V,et al.Influence of cyclic loading on the structure and double-stage structure relaxation behavior of a Zr-Cu-Fe-Al metallic glass[J].Materials Science & Engineering A,2019,742:526.
35. [35]
  AFONIN G V,MITROFANOV Y P,KOBELEV N P,et al.Relationship between the enthalpies of structural relaxation,crystallization and melting in metallic glass-forming systems[J].Scripta Materialia,2019,166:6.
36. [36]
  梁松,褚武扬,乔利杰.大块非晶硬度、磨损及摩擦的SPM研究[C]//中国机械工程学会.第十一届全国疲劳和断裂学术会议.北京:机械工业出版社,2002:197.
37. [37]
  唐明奇,祝庆,李福山.Ti基大块非晶的耐磨性研究[J].铸造技术,2005,26(10):941.
38. [38]
  ZHAO J,GAO M,MA M X,et al.Influence of annealing on the tribological properties of Zr-based bulk metallic glass[J].Journal of Non-Crystalline Solids,2018,481:94.
39. [39]
  SALEHAN R,SHAHVERDI H R,MIRESMAEILI R.Effects of annealing on the tribological behavior of Zr₆₀Cu₁₀Al₁₅Ni₁₅ bulk metallic glass[J].Journal of Non-Crystalline Solids,2019,517:127.
40. [40]
  JIN H W,AYER R,KOO J Y.Reciprocating wear mechanisms in a Zr-based bulk metallic glass[J].Journal of Materials Research,2007,22(2):264.
1. [1]
  刘广超 , 邓莎 , 高峄涵 , 吴涛 , 邓锐杰 . 加热卷烟辊压法薄片丝吸湿性影响因素研究. 轻工学报, 2024, 39(5): 109-117. doi: 10.12187/2024.05.013
2. [2]
  尹思睿 , 冯娇 , 杨晓宇 , 李良 . 植物蛋白复配对植物肉品质的影响. 轻工学报, 2024, 39(5): 18-28. doi: 10.12187/2024.05.003
3. [3]
  赵悦 , 闫清泉 , 李玲玉 , 司阔林 , 宗学醒 . 钙螯合盐对牛奶-豌豆双蛋白再制干酪品质的影响. 轻工学报, 2024, 39(5): 1-8. doi: 10.12187/2024.05.001
4. [4]
  贾尚羲 , 张怡雪 , 石盼盼 , 王昱 , 李可 . 不同时长超声波处理对鹰嘴豆分离蛋白乳化液稳定性的影响. 轻工学报, 2024, 39(5): 40-49. doi: 10.12187/2024.05.005
5. [5]
  胡新楠 , 朱成凯 , 胡中泽 , 纪执立 , 金伟平 , 郭城 , 沈汪洋 . 复配比对明胶-羟丙基甲基纤维素双水相体系微观结构和流变特性的影响. 轻工学报, 2024, 0(0): -.

点击查看大图

计量

PDF下载量: 26
文章访问数: 1265
引证文献数: 0

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

块体非晶合金摩擦磨损性能的影响因素与研究现状

作者简介: 王艳(1988-),女,河南省商丘市人,郑州轻工业大学讲师,博士,主要研究方面为非晶合金、复合材料成形工艺及摩擦学行为.;

Influential factors and research status on friction and wear performances of bulk amorphous alloys

计量

通讯作者: 陈斌, bchen63@163.com

块体非晶合金摩擦磨损性能的影响因素与研究现状

作者简介:王艳(1988-),女,河南省商丘市人,郑州轻工业大学讲师,博士,主要研究方面为非晶合金、复合材料成形工艺及摩擦学行为.

English Abstract

Influential factors and research status on friction and wear performances of bulk amorphous alloys

目录

块体非晶合金摩擦磨损性能的影响因素与研究现状

作者简介: 王艳(1988-),女,河南省商丘市人,郑州轻工业大学讲师,博士,主要研究方面为非晶合金、复合材料成形工艺及摩擦学行为.;

Influential factors and research status on friction and wear performances of bulk amorphous alloys

计量

文章相关

通讯作者: 陈斌, bchen63@163.com

块体非晶合金摩擦磨损性能的影响因素与研究现状

作者简介:王艳(1988-),女,河南省商丘市人,郑州轻工业大学讲师,博士,主要研究方面为非晶合金、复合材料成形工艺及摩擦学行为.

English Abstract

Influential factors and research status on friction and wear performances of bulk amorphous alloys

目录