| [1] |
GALINA I S,ANDREY E V,VLADIMIR I M.Algorithms for analysis of meshing and contact of spiral bevel gears[J].Mechanism and Machine Theory,2007,42:198.
|
| [2] |
FAYDOR L L,ALFONSO F,KENICHI H.Design,manufacture,stress analysis,and experimental tests of low-noise high endurance spiral bevel gears[J].Mechanism and Machine Theory,2006,41:83.
|
| [3] |
杨钟胜.齿轮的倒棱技术[J].汽车工艺与材料,2009(9):53.
|
| [4] |
FAN Q.Computerized modeling and simulation of spiral bevel and hypoid gears manufactured by Gleason face hobbing process[J].Journal of Mechanical Design,2006,128(11):1314.
|
| [5] |
翟杨益.齿轮的倒棱技术[J].建筑工程技术与设计,2018(21):3528.
|
| [6] |
RIBBECK K M.Deburring blade,device for mounting of deburring blades and bevel gear cutting machine for chamfering and/or deburring a bevel gear:20060047686[P].2006-05-18.
|
| [7] |
徐彦伟,肖铁岭,魏巍.弧齿锥齿轮大轮齿顶倒角加工模型与虚拟加工[J].农业机械学报,2008,39(9):161.
|
| [8] |
李佳,石将,陈新春.螺旋锥齿轮齿顶旋分倒棱技术研究[J].中国机械工程,2014,25(20):2734.
|
| [9] |
魏巍,张连洪.基于盘形刀具的弧齿锥齿轮齿顶倒棱加工方法研究[J].机械传动,2018,42(7):14.
|
| [10] |
刘景成.螺旋锥齿轮齿顶倒角加工技术研究[D].淄博:山东理工大学,2010.
|
| [11] |
WU X Q,ZHANG C Y.Mathematic modeling method for addendum line of spiral bevel gear[J].Machine Tool & Hydraulics,2015,43(18):26.
|
| [12] |
柴建伯.弧齿锥齿轮齿顶棱线方程的研究与建立[J].中国科技信息,2017,17(17):52.
|
| [13] |
李志明,李宏伟.基于几何分析求一类空间曲线的切线[J].高等数学研究,2017,20(6):18.
|
| [14] |
邓效忠,魏冰阳.锥齿轮设计的新方法[M].北京:科学出版社,2012.
|