[1] 国家烟草专卖局.卷烟工艺规范[M].北京:中国轻工业出版社,2016. National Tobacco Monopoly Administration.Cigarette manufacturing process specifications[M].Beijing:China Light Industry Press,2016.
[2] 国家烟草专卖局.卷烟 烟丝弹性的测定方法:YC/T 186—2004[S].北京:中国标准出版社,2004. National Technical Committee for Standardization of Tobacco.Cigarettes—Determination of elasticity of cut tobacco:YC/T 186—2004[S].Beijing:Standards Press of China,2004.
[3] 王天怡,姚二民,董一雷,等.温度对不同规格卷烟烟丝弹性的影响研究[J].轻工科技,2023,39(6):40-43.
,70. WANG T Y,YAO E M,DONG Y L,et al.Study on the influence of temperature on the elasticity of cut tobacco of different specifications[J].Light Industry Science and Technology,2023,39(6):40-43,70.
[4] 李旭英.草物料压缩流变动力学特性研究及压缩过程优化[D].呼和浩特:内蒙古农业大学,2006. LI X Y.Rheodynamic characteristics of herbage materials in compression and optimization of compression process[D].Huhehaote:Inner Mongolia Agricultural University,2006.
[5] 杨明韶.农业物料流变学[M].北京:中国农业出版社,2010. YANG M S.Agricultural material flow mechanics[M].Beijing:China Agricultural Press,2010.
[6] MYHAN R,JACHIMCZYK E.Rheological properties of a straw layer[J].Rheologica Acta,2015,54(1):19-27.
[7] 金楠,王红英,王威,等.饲料颗粒成型的应力松弛特性研究[J].饲料工业,2025,46(5):12-18.
JIN N,WANG H Y,WANG W,et al.Study on stress relaxation characteristics of feed pellet molding[J].Feed Industry,2025,46(5):12-18.
[8] 杜晓雪,郭文斌,王春光,等.饲用甜高粱秸秆应力松弛特性及参数优化的试验研究[J].中国农业大学学报,2019,24(2):123-131.
DU X X,GUO W B,WANG C G,et al.Stress relaxation characteristics and parameters optimization of feed sweet sorghum[J].Journal of China Agricultural University,2019,24(2):123-131.
[9] 房佳佳,张永,杨明韶,等.紫花苜蓿圆捆机卷压过程的应力松弛特性与模型建立[J].农业工程学报,2018,34(16):50-56.
FANG J J,ZHANG Y,YANG M S,et al.Stress relaxation behavior and modeling of alfalfa during rotary compression[J].Transactions of the Chinese Society of Agricultural Engineering,2018,34(16):50-56.
[10] LIN C Y,CHEN Y C,LIN C H,et al.Constitutive equations for analyzing stress relaxation and creep of viscoelastic materials based on standard linear solid model derived with finite loading rate[J].Polymers,2022,14(10):2124.
[11] 张强,孙力,邱晔,等.云南烤烟主产区烟叶及其烟气主要化学成分的差异分析[J].云南大学学报(自然科学版),2010,32(S1):87-91.
ZHANG Q,SUN L,QIU Y,et al.Analysis on the differences of principal chemical components and smoke components of flue-cured tobacco in main tobacco-growing areas of Yunnan[J].Journal of Yunnan University (Natural Science Edition),2010,32(S1):87-91.
[12] 黄中艳,王树会,朱勇,等.云南烤烟5项化学成分含量与其环境生态要素的关系[J].中国农业气象,2007,28(3):312-317.
HUANG Z Y,WANG S H,ZHU Y,et al.Relationships between content of leading chemical components of tobacco leaves and ecological factors in Yunnan Province[J].Chinese Journal of Agrometeorology,2007,28(3):312-317.
[13] 余建飞,郑福维,卿湘涛,等.湘西烟区气候特征及其对烟叶外观质量和物理特性的影响[J].甘肃农业大学学报,2018,53(5):43-51.
,57. YU J F,ZHENG F W,QING X T,et al.Analysis of climate factors and their influence on appearance qualities and physical characteristics of tobacco leaves in Xiangxi tobacco growing areas[J].Journal of Gansu Agricultural University,2018,53(5):43-51,57.
[14] 韩顺起,付丽丽,丁伟,等.烟丝压缩过程中应力松弛模型的建立[J].烟草科技,2023,56(6):78-84.
HAN S Q,FU L L,DING W,et al.Stress relaxation modeling for cut tobacco during compression[J].Tobacco Science & Technology,2023,56(6):78-84.
[15] 郭文斌,王志鹏,候智博,等.秸秆-薯渣混合物料应力松弛分数阶模型的建立及参数分析[J].农业工程学报,2021,37(13):284-290.
GUO W B,WANG Z P,HOU Z B,et al.Parameter analysis and development of fractional Calculus model for stress relaxation of cornstalk and potato residues[J].Transactions of the Chinese Society of Agricultural Engineering,2021,37(13):284-290.
[16] 韩顺起.烟草堆积散体压缩过程中的流变学行为及影响因素研究[D].郑州:中国烟草总公司郑州烟草研究院,2023. HAN S Q.Study on rheological behavior and influencing factors of tobacco pile bulk compression[D].Zhengzhou:Zhengzhou Tobacco Research Institute of China National Tobacco Corporation,2023.
[17] 国家烟草专卖局.烟草及烟草制品 试样的制备和水分测定 烘箱法:YC/T 31—1996[S].北京:中国标准出版社,1996. State Tobacco Monopoly Administration.Tobacco and tobacco products—Preparationof test sample and determination of water content—Oven method:YC/T 31—1996[S].Beijing:Standards Press of China,1996.
[18] 国家烟草专卖局.卷烟 烟丝填充值的测定:YC/T 152—2001[S].北京:中国标准出版社,2001. State Tobacco Monopoly Administration.Cigarette—Determination of filling power of cut tobacco:YC/T 152—2001[S].Beijing:Standards Press of China,2001.
[19] 刘丽,许自成.烟草叶质重研究进展[J].安徽农业科学,2007,35(35):11487-11489.
LIU L,XU Z C.Research advances of leaf specific weight of flue-cured tobacco[J].Journal of Anhui Agricultural Sciences,2007,35(35):11487-11489.
[20] 周定鹏,张鑫,徐玮杰,等.中国八大生态区烤烟理化指标特征及模块配方设计分析[J].中南农业科技,2025,46(5):88-94.
ZHOU D P,ZHANG X,XU W J,et al.Analysis of the characteristics of physicochemical indicators of roasted tobacco in the eight major ecological zones of China and the design of theular formula[J].South-Central Agricultural Science and Technology,2025,46(5):88-94.
[21] 马爱国,宋德伟,孙在明,等.不同部位烟叶外观特征与内在质量分析研究[J].山东农业科学,2009,41(5):48-51.
MA A G,SONG D W,SUN Z M,et al.Study on appearance characters and internal quality of different stalk position flue-cured tobacco leaves[J].Shandong Agricultural Sciences,2009,41(5):48-51.
[22] 卢幼祥,叶浩,邵名伟,等.切丝宽度对细支卷烟质量影响分析[J].湖南文理学院学报(自然科学版),2023,35(1):53-57.
,88. LU Y X,YE H,SHAO M W,et al.Analysis of the influence of cut width on the quality of thin.cigarettes[J].Journal of Hunan University of Arts and Science (Science and Technology),2023,35(1):53-57,88.
[23] 郭华诚,吴艳艳,张峻松,等.切丝宽度对细支烟卷制质量、主流烟气及感官质量的影响[J].食品与机械,2021,37(2):194-198.
GUO H C,WU Y Y,ZHANG J S,et al.Influences of cut tobacco width on physical indexes,mainstream smoke and sensory quality of slim cigarette[J].Food & Machinery,2021,37(2):194-198.
[24] 周之武.卷烟吸阻影响因素研究综述[J].轻工科技,2020,36(11):9-10.
ZHOU Z W.A review of factors affecting cigarette draw resistance[J].Light Industry Science and Technology,2020,36(11):9-10.
[25] 朱宁宁,董利利,冯银龙,等.影响卷烟吸阻变化的多因素研究[J].食品工业,2023,44(5):134-139.
ZHU N N,DONG L L,FENG Y L,et al.Study on the multi factors influencing the change of cigarette resistance[J].The Food Industry,2023,44(5):134-139.
[26] 吴晓炯,居雷,张宇,等.基于Copula函数和GMM联用的卷烟理想烟柱质量与压降物理模型[J].烟草科技,2026,59(1):89-99.
WU X J,JU L,ZHANG Y,et al.An ideal mass and pressure drop physical model for tobacco rods based on the combination of Copula function and Gaussian mixture model[J].Tobacco Science & Technology,2026,59(1):89-99.