| [1] |
林基恕,张振波.21世纪航空发动机动力传输系统的展望[J].航空动力学报,2001,16(2):108.
|
| [2] |
KIM T,PARK S.Effects of spray patterns on mixture formation process in multihole-type Direct Injection Spark Ignition (DISI) gasoline engine[J].Atom Sprays,2015,26(11):1.
|
| [3] |
ISHIMOTO J,HOSHINA H,TSUCHIYAMA T,et al.Integrated simulation of the atomization process of a liquid jet through a cylindrical nozzle[J].Interdisciplinary Information Sciences,2007,3(1):7.
|
| [4] |
HE B Q,WANG J X,HAO J M,et al.A study on emission characteristics of an EFI engine with ethanol blended gasoline fuels[J].Atmos Environ,2003,37(7):949.
|
| [5] |
ZHANG M,DRAKE M C,PETERSON K.Simultaneous high-speed imaging of fuel spray,combustion luminosity,and soot luminosity in a spray-guided direct injection engine with different multi-hole fuel injectors[C]//Proceedings of the ASME 2013 Internal Combustion Engine Division Fall Technical Conference.DOI:10.1115/ICEF2013-19066.Dearborn:Michigan,2013.
|
| [6] |
LEE S,PARK S.Spray atomization characteristics of a GDI injector equipped with a group-hole nozzle[J].Fuel,2014,137:50.
|
| [7] |
HATANAKA K,SAITO T.Influence of nozzle geometry on underexpanded axisymmetric free jet characteristics[J].Shock Waves,2012,22:427.
|
| [8] |
TORABMOSTAEDI H,ZHANG T.Effect of nozzle geometry and processing parameters on the formation of nanoparticles using FSP[J].Chemical Engineering Research and Design,2014,92:2470.
|
| [9] |
YAMAMOTO T,SHIMODAIRA K,YOSHIDA S.Emission reduction of fuel-staged aircraft engine combustor using an additional premixed fuel nozzle[J].Journal of Engineering for Gas Turbines and Power,2013,135:031502.
|
| [10] |
陈闽鄂.锥角的测量与测量误差分析[J].计量与测试技术,2007,34(9):26.
|
| [11] |
曲贵龙,李霄.圆锥孔的锥角和直径的间接测量[J].中国计量,2001(3):22.
|
| [12] |
QU G L,LI X.Indirect measurement of angle and diameter of conic hole[J].Measurement Technique,2001(3):22.
|
| [13] |
CHEN M.The measurement and error analysis of taper[J].Metrology & Measurement Technique,2007,34(9):26.
|
| [14] |
仉喜洋,谌志新,徐志强.RV减速器综合参数测量方法研究[J].机械传动,2018,42(5):53.
|
| [15] |
刘兴荣,张小希,马桂茹,等.一种新型实用的内锥角测量方法[J].中国计量,2009(5):87.
|
| [16] |
YANG Z L,CHEN Y.Research on measuring method of cone angle and atuo-measuring system with high precision[C]//The 10th International Conference on Electronic Measurement & Instruments.Qingdao:Qingdao International Convention Conter,2015:287.
|
| [17] |
SIRATET G Y,PSALTIS D.Conoscopic Holography[J].Opt Lett,1985,10(1):4.
|