挤压道次对2024铝合金ECAP变形的影响
Effect of extrusion pass on ECAP deformation of 2024 aluminum alloy
-
摘要: 以2024铝合金为研究对象，采用Deform-3D有限元软件对试件进行数值模拟和A路径8道次ECAP实验，研究在不同挤压道次下试件变形过程中金属流动性、挤压载荷和等效应变的变化情况.结果表明：试件的头部和尾部区域金属流动网格呈现弯曲变形，中部区域呈现纯剪切变形，且随道次的增加变形程度显著增强；挤压载荷随挤压道次的增加呈现先上升后下降的趋势，其变化受试件强度影响；试件等效应变值的大小与挤压道次成正比关系，且等效应变值从试件靠近内转角区域出现由大到小的层状分布，3道次后出现应变分布均匀性下降的趋势.Abstract: Taking 2024 aluminum alloy as the research object,Deform-3D finite element software was used to conduct numerical simulation of the specimen and 8-pass ECAP experiment of path A,and the changes of metal fluidity,extrusion load and equivalent strain in the deformation process of the specimen under different extrusion passes were studied.The results showed that the metal flow mesh in the head and tail region of the specimen presented bending deformation,while the central region presented pure shear deformation and the deformation degree increased significantly with the passes.The extrusion load increased first and then decreased with the increase of the extrusion pass,which was affected by the strength of the specimen.The size of the equivalent strain value of the specimen was proportional to the number of extrusion passes,and the equivalent strain value was distributed in layers from large to small from the area near the inner corner of the specimen,and the uniformity of strain distribution decreased after 3-pass.
-
-
[1]
冯美斌.汽车轻量化技术中新材料的发展及应用[J].汽车工程,2006(3):213.
-
[2]
杨守杰,戴圣龙.航空铝合金的发展回顾与展望[J].材料导报,2005(2):76.
-
[3]
刘英,李元元,张大童.金属材料的等通道转角挤压研究进展[J].材料科学与工程,2002(4):613.
-
[4]
SEGAL V M.Materials processing by simple shear[J].Materials Science and Engineering A,1995,197(2):157.
-
[5]
VALIEV R Z,LANGDON T G.Principles of equal-channel angular pressing as a processing tool for grain refinement[J].Progress in Materials Science,2006,51(7):881.
-
[6]
XU C,FURUKAWA M,HORITA Z,et al.The evolution of homogeneity and grain refinement during equal-channel angular pressing:A model for grain refinement in ECAP[J].Materials Science and Engineering A,2005,398(1/2):66.
-
[7]
杨栋,陈文琳,吴跃.等通道转角挤压7075铝合金动态再结晶组织晶粒度预报与性能分析[J].机械工程学报,2014,50(6):87.
-
[8]
胡丽娟,彭颖红,张少睿,等.基于位错演化模型纳米晶块体材料晶粒的演变[J].塑性工程学报,2008,15(6):129.
-
[9]
刘腾,张伟,吴世丁,等.双相合金Mg-8Li-1Al的等通道转角挤压Ⅰ:挤压过程中的变形方式[J].金属学报,2003(8):790.
-
[10]
KAWASAKI M,HORITA Z,LANGDON T G.Microstructural evolution in high purity aluminum processed by ECAP[J].Materials Science and Engineering A,2009,524(1/2):143.
-
[11]
刘英,陈维平,张卫文,等.等通道转角挤压后AZ31镁合金的微观结构与性能[J].华南理工大学学报(自然科学版),2004(9):50.
-
[12]
汪建敏,许晓静,石凤健,等.等径角挤压获得超细晶铜的研究[J].热加工工艺,2004(7):6.
-
[13]
汪建敏,周孔亢,陆晋,等.层错能在剧烈剪切变形时对晶粒细化的影响[J].机械工程学报,2008,44(11):126.
-
[14]
郭廷彪,丁雨田,胡勇,等.大塑性变形过程中单晶和多晶铜的组织演变及变形机理研究[J].铸造技术,2009,30(9):1164.
-
[15]
IWAHASHI Y,WANG J,HORITA Z.Principle of equal-channel angular peessing for the processing of ultra-fine grained materials[J].Scripta Materialia,1996,35(2):143.
-
[16]
田佳,李建平,白亚平,等.等通道挤压对7075铝合金组织与力学性能的影响[J].材料热处理学报,2016,37(7):61.
-
[17]
李姣,杨刚.挤压道次对航空用工业纯铝ECAP组织和性能的影响[J].热加工工艺,2019,48(3):176.
-
[1]
-
点击查看大图
计量
- PDF下载量: 9
- 文章访问数: 1664
- 引证文献数: 0
下载:
