Study on hot deformation behavior and hot processing map of 6063-T5 aluminum alloy

Abstract

Keywords:
• 6063 aluminum alloy,
• hot deformation behavior,
• constitutive model,
• hot processing map

References

1. [1]

   CAI Y,WANG X S,YUAN S J.Analysis of surface roughening behavior of 6063 aluminum alloy by tensile testing of a trapezoidal uniaxial specimen[J].Materials Science and Engineering:A,2016,672:184.

2. [2]

   HIRSCH J,AL-SAMMAN T.Superior light metals by texture engineering:optimized aluminum and magnesium alloys for automotive applications[J]. Acta Materialia, 2013,61(3):818.

3. [3]

   YE T,LI L X,GUO P C, et al. Effect of aging treatment on the microstructure and flow behavior of 6063 aluminum alloy compressed over a wide range of strain rate[J]. International Journal of Impact Engineering, 2016,90:72.

4. [4]

   LOKESH V S S,GOEL S,KUMAR N, et al. A study on fracture toughness and strain rate sensitivity of severely deformed Al 6063 alloys processed by multiaxial forging and rolling at cryogenic temperature[J]. Materials Science and Engineering:A,2017,686:82.

5. [5]

   计海涛,于得资,孙绍华. 6063-T5铝合金建筑型材生产工艺优化[J]. 轻合金加工技术,2002,30(8):26.
   

6. [6]

   PARK N,SHIBATA A,TERADA D, et al. Flow stress analysis for determining the critical condition of dynamic ferrite transformation in 6Ni-0.1C steel[J]. Acta Materialia,2013,61(1):163.

7. [7]

   MEJÍA I,BEDOLLA-JACUINDE A, MALDONADO C, et al. Determination of the critical conditions for the initiation of dynamic recrystallization in boron microalloyed steels[J]. Materials Science and Engineering:A,2011,528:4133.

8. [8]

   QUAN G Z,LUO G C,LIANG J T,et al. Modelling for the dynamic recrystallization evolution of Ti-6Al-4V alloy in two-phase temperature range and a wide strain rate range[J]. Computational Materials Science,2015,97:136.

9. [9]

   俞德新,胡欧林,曾瑞祥,等.热处理工艺对低硅Al-Si-Mg铸造铝合金组织和力学性能的影响[J].上海金属,2020,42(4):66.
   

10. [10]

    高俊.6082铝合金热成形行为及其在汽车转向节高温精密锻造的应用[D].长春:吉林大学, 2020.
    

11. [11]

    刘建勃,王智毅,马雄. Al-Mg-Si合金热变形行为与本构关系[J]. 塑性工程学报,2017,24(3):197.
    

12. [12]

    叶文宏. 6A02铝合金热变形行为及杯形件等温锻造数值模拟[D].哈尔滨:哈尔滨工业大学,2016.
    

13. [13]

    CHEN L,ZHAO G Q,YU J Q. Hot deformation behavior and constitutive modeling of homo-genized 6026 aluminum alloy[J]. Materials and Design,2015,74:25.

14. [14]

    HUANG Y C,LIU L C,XIAO Z B, et al. Hot Deformation behavior of 6063 aluminum alloy studied using processing maps and microstructural analysis[J].Physics of Metals and Metallography, 2019,120(11):1115.

15. [15]

    WU R H,LIU Y,GENG C, et al. Study on hot deformation behavior and intrinsic workability of 6063 aluminum alloys using 3D processing map[J].Journal of Alloys and Compounds,2017,713:1.

16. [16]

    MECKING H,KOCKS U F. Kinetics of flow and strain-hardening[J].Acta Metallurgica, 1981,29(11):1865.

17. [17]

    SELLARS C M,MCTEGART W J. On the mechanism of hot deformation[J].Acta Metallurgica, 1966,14(9):1136.

18. [18]

    ZENER C,HOLLOMON J H. Effect of strain rate upon plastic flow of steel[J].Journal of Applied Physics, 1944,15(1):22.

19. [19]

    陈飞.热锻非连续变形过程微观组织演变的元胞自动机模拟[D].上海:上海交通大学,2012.
    

20. [20]

    夏祖瑜.300M钢成形过程动态再结晶的元胞自动机模拟[D].武汉:华中科技大学,2019.
    

21. [21]

    季海鹏.基于元胞自动机法的316LN不锈钢动态再结晶组织预测[D].秦皇岛:燕山大学,2013.
    

22. [22]

    李豪.稀土镁合金动态再结晶动力学研究[D]. 重庆:西南大学,2019.
    

23. [23]

    卞东伟.6063铝合金微观组织演变多尺度本构建模研究[D].银川:宁夏大学,2019.
    

24. [24]

    MCQUEEN H J.Development of dynamic recrystallization theory[J].Materials Science and Engineering:A, 2004,387:203.

25. [25]

    MCQUEEN H J. Initiating nucleation of dyna mic recrystallization, primarily in polycrystals[J]. Materials Science and Engineering:A, 1988, 101:149.

26. [26]

    MCQUEEN H J,RYAN N D. Constitutive anal ysis in hot working[J]. Materials Science and Engineering:A,2002,322:43.

27. [27]

    MADEJ L,SITKO M,PIETRZYK M. Perceptive comparison of mean and full field dynamic recrys tallization models[J]. Archives of Civil and Mechanical Engineering, 2016,16(4):569.

28. [28]

    杜大鹏. 基于位错密度的流动应力模型的研究[D]. 上海:上海交通大学,2010.
    

29. [29]

    POLIAK E I,JONAS J J. Initiation of dynamic re crystallization in constant strain rate hot deformation[J]. ISIJ International, 2003,43(5):684.

30. [30]

    PRASAD Y V R K. Recent advances in the sci ence of mechanical processing[J]. Indian Jour nal of Technology, 1990,28(6/7/8):435.

31. [31]

    PRASAD Y V R K, GEGEL H L, DORAIVELU S M, et al. Modeling of dynamic material behavior in hot deformation:forging of Ti-6242[J]. Metal lurgical Transactions A, 1984, 15(10):1883.

32. [32]

    KE B,YE L Y,TANG J G, et al. Hot deforma tion behavior and 3D processing maps of AA7020 aluminum alloy[J]. Journal of Alloys and Compounds, 2020,845:1.

Proportional views