JOURNAL OF LIGHT INDUSTRY

CN 41-1437/TS  ISSN 2096-1553

Volume 38 Issue 5
October 2023
Article Contents
LU Ping, CHU Wenjuan, CUI Chun, et al. Effect of filling state of cut tobacco on rolling quality and ash integrity of cigarette[J]. Journal of Light Industry, 2023, 38(5): 68-73,82. doi: 10.12187/2023.05.009
Citation: LU Ping, CHU Wenjuan, CUI Chun, et al. Effect of filling state of cut tobacco on rolling quality and ash integrity of cigarette[J]. Journal of Light Industry, 2023, 38(5): 68-73,82. doi: 10.12187/2023.05.009 shu

Effect of filling state of cut tobacco on rolling quality and ash integrity of cigarette

  • Received Date: 2022-09-30
    Accepted Date: 2022-11-14
  • By extracting and measuring[BP)]Selecting parameters that could comprehensively characterize the filling state of cut tobacco, the influence of the filling state of cut tobacco [BP(](filling value, filling amount, filling density) [BP)]parameters on the quality of cigarette making (suction resistance, hardness, total ventilation rate) and the ash integrity of cigarette was investigated. The results showed that the filling value, filling amount, and filling density of the cut tobacco inside the cigarette could comprehensively reflect the filling state of the cut tobacco, where the filling density could be characterized by the midpoint density, average density, density index, and density gradient of the cigarette.[BP(]; 2) The degree of tightness is the main factor affecting the filling state of cut tobacco. 3)[BP)] The filling state of cut tobacco could significantly affect the suction resistance, hardness, and total ventilation rate of cigarettes, with determination coefficients of 0.781, 0.576 and 0.672, respectively. The suction resistance, total ventilation rate, cut tobacco filling value, and filling amount had significant impact on the comprehensive ash integrity of cigarette, with a determination coefficient of 0.391.
  • 加载中
    1. [1]

      郑丰,肖翠翠,王小平,等.卷烟纸特性对卷烟静态包灰性能的影响[J].烟草科技,2020,53(3):82-88.

    2. [2]

      顾永圣,段良勇,闫新可,等.不同浆料配比卷烟纸性能及对卷烟的影响[J].中国造纸,2018,37(11):31-35.

    3. [3]

      余耀,詹建波,王浩,等.致密包灰全麻卷烟纸制备技术及应用[J].新型工业化,2017,7(3):44-48.

    4. [4]

      王孝峰,郭东锋,张晓宇,等.卷烟燃烧包灰与烟丝化学成分的关系[J].烟草科技,2022,55(2):45-51.

    5. [5]

      董浩,王澍,周明珠,等.卷烟表观燃烧性能质量状况分析[J].烟草科技,2022,55(4):70-78.

    6. [6]

      汪兵云,蔡兵,查勇,等.烟支吸阻稳定性影响因素研究[J].现代农业科技,2017,696(10):248-249
      ,253.

    7. [7]

      赵静宜,宋世强,侯静林,等.平准器规格参数对卷烟烟气的影响[J].轻工科技,2016,32(2):110-112.

    8. [8]

      许艳冉,刘舒畅,穆林,等.烟丝和卷烟机参数对卷烟包灰性能的影响[J].烟草科技,2020,53(12):67-74.

    9. [9]

      国家烟草专卖局.烟草及烟草制品 调节和测试的大气环境:GB/T 16447—2004[S].北京:中国标准出版社,2004.

    10. [10]

      王中山,赵静宜,杨正军,等.不同切丝方式对烟丝结构及烟支吸阻的影响[J].轻工科技,2021,37(5):63-65.

    11. [11]

      崔春,孟祥士,纪朋,等.陈皮爆珠对卷烟常规理化指标和感官品质的影响[J].轻工学报,2019,34(5):40-46.

    12. [12]

      楚文娟,崔建华,王建民,等.基于卷烟纸参数的卷烟静态包灰综合评价方法[J].烟草科技,2021,54(11):69-76.

    13. [13]

      王孝峰,张劲,李延岩,等.卷烟燃烧速率与其包灰性能关系分析[J].烟草科技,2021,54(10):70-76.

    14. [14]

      朱涛,杨传敏,雷振,等.不同因素对烟丝填充值的影响研究[J].南方农业,2022,16(13):63-65
      ,71.

    15. [15]

      倪克平,范铁桢,王涛.卷烟硬度、吸阻与单支重相关性分析[J].烟草科技,2002(3):9-13.

    16. [16]

      何涛,周辉,邓明飞,等.ZJ17卷烟机平准器微调手柄的改造方案[J].设备管理与维修,2022(5):97-98.

    17. [17]

      向虎,何孝强,刘戈弋,等.基于烟丝填充值的卷烟重量设计模型研究[J].食品与机械,2017,33(10):190-193.

    18. [18]

      张玉海,王兵,申玉军,等.国产拟替代进口烤烟与津巴布韦烤烟物理性状的比较[J].烟草科技,2008(2):17-21.

    19. [19]

      尹本涛,万丽娟,徐杨斌,等.抽吸模式和烟支密度分布对卷烟包灰性能的影响[J].安徽农业科学,2019,47(17):182-185.

Article Metrics

Article views(2096) PDF downloads(55) Cited by()

Ralated
    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return