DU Mao-mao. Calculation of crack width of Chinese,American and European concrete codes[J]. Journal of Light Industry, 2012, 27(2): 55-58. doi: 10.3969/j.issn.1004-1478.2012.02.013
Citation:
DU Mao-mao. Calculation of crack width of Chinese,American and European concrete codes[J]. Journal of Light Industry, 2012, 27(2): 55-58.
doi:
10.3969/j.issn.1004-1478.2012.02.013
Calculation of crack width of Chinese,American and European concrete codes
-
Received Date:
2011-08-14
Available Online:
2012-03-15
-
Abstract
The calculating modes of crack width of Chinese,American and European concrete codes were compared considering their calculating methods, parameters and precisions according to the previous experimental data of short-term crack width of reinforced concrete flexural members.Based on the comparison and the calculating mode of crack width of Chinese concrete code,the suggested formula for maximum crack width of reinforced concrete flexural members was proposed.The results showed that the calculating values of suggested formula agreed well with the test ones.
-
-
References
-
[1]
赵国藩,李树瑶,廖婉卿,等.钢筋混凝土结构的裂缝控制[M].北京:海洋出版社,1991.
-
[2]
王铁宏.亟需推广应用高强钢筋和高性能混凝土[J].建设科技,2005,4(6):28.
-
[3]
李空军,杨勇新,王希伟.高强钢筋在混凝土结构工程中的应用[J].广东土木与建筑,2008,36(5):15.
-
[4]
汪红蕾.中国建筑将进入高强钢筋时代[J].建筑,2011,58(19):6.
-
[5]
李志华,苏小卒,赵勇,等.荷载作用下钢筋混凝土梁的裂缝控制规范比较[J].武汉理工大学学报,2010,32(13):67.
-
[6]
ACI 318-08,Building code requirements for structural concrete and commentary[S].
-
[7]
Frosch R J.Another look at cracking and crack control in reinforced concrete[J].ACI Structural J,1999,96 (3):437-442.
-
[8]
EN 1992-1-1:2004,Eurocode 2:Design of concrete structures(part 1-1):general rules and rules for buildings[S].
-
[9]
杜毛毛.配500MPa钢筋后张有黏结预应力混凝土梁受弯性能研究[D].上海:同济大学, 2010.
-
Proportional views
-
-