基于PROFIBUS的纺织工业网络架构规划

王永华; 常洁; 江豪

doi:10.3969/j.issn.2095-476X.2013.02.008

March 2013

Article Contents

WANG Yong-hua, CHANG Jie and JIANG Hao. The planning of network architecture for textile industry based on PROFIBUS[J]. Journal of Light Industry, 2013, 28(2): 31-35. doi: 10.3969/j.issn.2095-476X.2013.02.008

Citation: WANG Yong-hua, CHANG Jie and JIANG Hao. The planning of network architecture for textile industry based on PROFIBUS[J]. Journal of Light Industry, 2013, 28(2): 31-35. doi: 10.3969/j.issn.2095-476X.2013.02.008 shu

The planning of network architecture for textile industry based on PROFIBUS

College of Electric Information Engineering, Zhengzhou University of Light Industry, Zhengzhou 450002, China

Received Date: 2012-11-19
Available Online: 2013-03-15

Abstract

The textile industry is a typical manufacturing industry of assembly line, its control is given priority to with switch quantity, and its characteristics are more procreative machines and wide distribution area. The PROFIBUS field bus technology was presented in this textile industry informatization network architecture,in order to meet their requirements of high intelligent information systems and strong communications networking capabilities. The scheme of network architecture planning was as follows:the data acquisition of textile production process and the processing systems backbone network to PROFIBUS, to the top connected to the enterprise information via industrial Ethernet, and to the bottom integrated all the field level device control systems, the process of PROFIBUS networking should be noted that the use of repeaters, network termination resistors and independent power supply. In the process of networking a variety of communication protocols conversion method was as follows:the machines that own with PLC controller are able to be added corresponding DP extension module, corresponding DP extension modules are articulated to their controlers; for the equipments with RS232/RS485 universal serial interface, the gateway device can be used to realize the serial port and PROFIBUS communication; the devices with RJ45 Ethernet interface, can be directly through the industry switches connected to Ethernet, or through the corresponding Ethernet module connected to field bus; for machines with specialized independent control system, OPC technology was used to a-chieve system integration.
- textile industry information,
- textile industrial network,
- PROFIBUS,
- industrial ethernet,
- bus protocol conversion
References
1. [1]
  王永华,Verwer A[英].现场技术及应用教程[M].2版. 北京:机械工业出版社,2012:344-346.
2. [2]
  廖常初,祖正容. 西门子工业通信网络组态编程与故障诊断[M].北京:机械工业出版社,2009:12-13.
3. [3]
  李方园. 西门子S7系列PLC电气控制精解[M].北京:化学工业出版社,2010:8.
4. [4]
  赵欣. 西门子工业网络交换机应用指南[M].北京:机械工业出版社,2008:73-76.
5. [5]
  王永华. 现代电气控制及PLC应用[M].2版. 北京:北京航空航天大学出版社,2008:287-288.
6. [6]
  陆贺卿. 台达PLC在环锭细纱机控制系统中的应用[J].纺织机械,2010(2):70.
7. [7]
  周琴,王海群. 基于CC-Link网络的多电动机控制系统[J].电机与控制应用,2010,37(7):24.
8. [8]
  王永华,曹雪华,徐群. 基于PROFIBUS DP的串口设备群的集成方案与实现[J].制造业自动化,2008,30(7):44.
9. [9]
  欧阳丹娜,李颖宏. RS232串口与PROFIBUS DP通信实现的研究[J].仪器仪表学报,2005,26(Z2):82.
10. [10]
  何成,施亮. 现场总线技术在数据采集与监控系统中的应用[J].科技创新导报,2008(32):32.
11. [11]
  王永华,邱世坚,江豪,等. 纺织设备能耗实时监测及处理系统的研制[J].棉纺织技术,2012,40(10):9.
12. [12]
  王永华,何胜科,江豪,等. 纺织生产过程数据集成与处理系统的开发[J].棉纺织技术,2010,38(11):22.
13. [13]
  丁磊,费敏锐,陈维刚. 现场总线协议转换机理及实现[J].自动化仪表,2005,26(7):1.
14. [14]
  叶凌箭,麻红昭. WinCC与S7-200PLC通信数据初始化的实现[J].化工自动化及仪表,2007,34(5):45.
15. [15]
  潘可,余华武,陈磊. Anybus-Profibus在Linux下的驱动设计[J].电力自动化设备,2010,30(11):110.
Proportional views

Get Citation

PDF

XML

Article Metrics

Article views(1037) PDF downloads(42) Cited by()

Ralated

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

The planning of network architecture for textile industry based on PROFIBUS

Abstract

References

Proportional views

Article Metrics

Ralated

Proportional views

通讯作者: 陈斌, bchen63@163.com