面向皮肤光电治疗术后热损伤护理的凝胶贴膜材料研究

兰玉婷; 张逸飞; 郭佳慧; 尚欣欣; 刘影; 梁文魁; 王璐; 关国平

doi:10.12187/2025.01.014

CN 41-1437/TS ISSN 2096-1553

兰玉婷 , 张逸飞 , 郭佳慧 , 尚欣欣 , 刘影 , 梁文魁 , 王璐 , 关国平

兰玉婷, 张逸飞, 郭佳慧, 等. 面向皮肤光电治疗术后热损伤护理的凝胶贴膜材料研究[J]. 轻工学报, 2025, 40(1): 120-126. doi: 10.12187/2025.01.014

引用本文: 兰玉婷, 张逸飞, 郭佳慧, 等. 面向皮肤光电治疗术后热损伤护理的凝胶贴膜材料研究[J]. 轻工学报, 2025, 40(1): 120-126. doi: 10.12187/2025.01.014

LAN Yuting, ZHANG Yifei, GUO Jiahui, et al. Study on gel film materials for thermal injury nursing following skin photoelectric therapy[J]. Journal of Light Industry, 2025, 40(1): 120-126. doi: 10.12187/2025.01.014

Citation: LAN Yuting, ZHANG Yifei, GUO Jiahui, et al. Study on gel film materials for thermal injury nursing following skin photoelectric therapy[J]. Journal of Light Industry, 2025, 40(1): 120-126. doi: 10.12187/2025.01.014

面向皮肤光电治疗术后热损伤护理的凝胶贴膜材料研究

1. 上海市现代纺织前沿科学研究基地, 上海 201620;
2. 东华大学纺织学院, 上海 201620

作者简介: 兰玉婷(1999—),女,湖南省湘潭市人,东华大学硕士研究生,主要研究方向为医用水凝胶材料。E-mail:lanyuting1224@163.com;

通讯作者: 关国平,ggp@dhu.edu.cn

基金项目: 高等学校学科创新引智计划项目(BP0719035)
中图分类号: TS201.7

Study on gel film materials for thermal injury nursing following skin photoelectric therapy

1. Shanghai Frontiers Science Center of Advanced Textiles, Shanghai 201620, China;
2. College of Textiles, Donghua University, Shanghai 201620, China

Corresponding author: GUAN Guoping, ggp@dhu.edu.cn

Received Date: 2024-03-27
Accepted Date: 2024-07-01

CLC number: TS201.7

摘要: 针对光电治疗术后皮肤热损伤问题,以κ-卡拉胶(κ-carrageenan,KC)和魔芋葡甘露聚糖(Konjac Glucomannan,KGM)为主要原料,开发一种用于术后皮肤热损伤护理的凝胶贴膜材料,并对其形态结构、力学性能、降温性能、理化性能等进行表征。结果表明:当KC与KGM的质量比为5.5∶4.5、总干物质质量浓度为10 g/L时,所制光电治疗|皮肤降温|凝胶贴膜|热损伤备的KC/KGM凝胶贴膜能在25 min内将人工皮肤表面温度从(61.28±0.52) ℃降至(37.88±0.55) ℃,且其拉伸断裂强度和断裂伸长率分别达(0.11±0.03) MPa和(160.63±5.92)%,压缩强度为(0.19±0.01) MPa。25 ℃时所制备凝胶贴膜的保湿率在25 min内保持在(86.04±1.72)%。此外,该凝胶贴膜外观透明且平整,具有良好的耐寒性和耐热性,且满足面膜行业标准《面膜》(QB/T 2872—2017)中所规定的相关感官及理化性能要求。
- 光电治疗 /
- 皮肤降温 /
- 凝胶贴膜 /
- 热损伤
Abstract: To address the problems of skin thermal damage after photoelectric therapy, κ-carrageenan and konjac glucomannan were used as the main raw materials to prepare a gel film material for skin cooling after photoelectric therapy, and its morphological structure, mechanical properties, cooling performance and physical and chemical properties were comprehensively characterized. The results showed that when the mass ratio of KC to KGM was 5.5∶4.5 and the mass concentration of the total dry matter was 10 g/L, the prepared KC/KGM gel film could reduce the surface temperature of artificial skin from (61.28±0.52) ℃ to (37.88±0.55) ℃ within 25 min. The tensile strength and elongation at break were (0.11±0.03) MPa and (160.63±5.92) %, respectively. The compressive strength can reach (0.19±0.01) MPa. The moisture retention rate of the gel film prepared at 25 ℃ was (86.04±1.72) % within 25 min. The appearance of the gel film was transparent and flat, the cold and hot resistance was satisfying, which met the relevant sensory and physical and chemical performance requirements specified in the mask standard (QB / T 2872—2017).
- photoelectric therapy /
- skin cooling /
- gel film /
- thermal injury
1. [1]
  王奕欣,周成霞,李利.光电术后皮肤屏障功能修复的现状与挑战[J].皮肤科学通报,2023,40(6):656-661.
2. [5] WACHAL K,STACHOWSKA E,KORPUŚCI ŃSKA K,et al.Physical properties of hydrogel wound dressing and its use in low-level laser therapy (LLLT)[J].Lasers in Medical Science,2018,33(6):1317-1325.
3. [8] OKAN G,RENDON M I.The effects of a high glycerin content hydrogel premolded mask dressing on post-laser resurfacing wounds[J].Journal of Cosmetic and Laser Therapy,2011,13(4):162-165.
4. [10] YEO Y H,CHATHURANGA K,LEE J S,et al.Multifunctional and thermoresponsive methylcellulose composite hydrogels with photothermal effect[J].Carbohydrate Polymers,2022,277:118834.
5. [11] HU B,YANG Y S,HAN L Y,et al.Characterization of hydrophilic and hydrophobic core-shell microcapsules prepared using a range of antisolvent approaches[J].Food Hydrocolloids,2022,131:107750.
6. [13] WANG X Y,GOFF H D,CUI S W.Synergism between yellow mustard gum and κ-carrageenan studied by structural and rheological methods[J].Food Hydrocolloids,2024,148:109401.
7. [14] PANGESTUTI R,SHIN K H,KIM S K.Anti-photoaging and potential skin health benefits of seaweeds[J].Marine Drugs,2021,19(3):172.
8. [15] VALENTA C,SCHULTZ K.Influence of carrageenan on the rheology and skin permeation of microemulsion formulations[J].Journal of Controlled Release,2004,95(2):257-265.
9. [16] WANG N,TIAN J,WANG L L,et al.Fucoidan hydrogels induced by κ-carrageenan:Rheological,thermal and structural characterization[J].International Journal of Biological Macromolecules,2021,191:514-520.
10. [18] PRIYA S,CHOUDHARI M,TOMAR Y,et al.Exploring polysaccharide-based bio-adhesive topical film as a potential platform for wound dressing application:A review[J].Carbohydrate Polymers,2024,327:121655.
11. [19] WEI Y,WANG Y L,HE X J.Gel properties of κ-carrageenan-konjac gum mixed gel and their influence factors[J].Advanced Materials Research,2011(396/397/398):1389-1393.
12. [28] PRAKASH C,BHARGAVA P,TIWARI S,et al.Skin surface pH in acne vulgaris:Insights from an observational study and review of the literature[J].The Journal of Clinical and Aesthetic Dermatology,2017,10(7):33-39.
1. [1]
  孙彦庆 , 杜芬 , 朱宗敏 , 冯晓梅 , 尚丽丽 , 曹婉秀 , 刘楚怡 . 大黄鱼鱼鳔低聚肽的制备及其延缓皮肤衰老的研究. 轻工学报, 2025, 40(1): 107-119. doi: 10.12187/2025.01.013
2. [2]
  章存勇 , 庄海锋 , 时雅琪 , 邹鹏 , 丁乃红 , 纵坤 , 贾良元 , 郭东锋 . 国内外雪茄烟叶热解产物差异性研究. 轻工学报, 2024, 0(0): -.
3. [3]
  章存勇 , 庄海锋 , 时雅琪 , 邹鹏 , 丁乃红 , 纵坤 , 贾良元 , 郭东锋 . 国内外雪茄烟叶热解产物差异性研究. 轻工学报, 2024, 39(5): 118-126. doi: 10.12187/2024.05.014
4. [4]
  赵金科 , 崔华鹏 , 徐海涛 , 秦亚琼 , 陈业娴 , 刘雨 , 刘瑞红 , 刘绍锋 . 周向型加热卷烟烟芯段逐口热解过程的空间表征. 轻工学报, 2025, 0(0): -.
5. [5]
  吴靖娜 , 林泽烨 , 苏筱 , 张任翔 , 陈晓婷 , 潘南 . 龙须菜渣纤维素/纳米纤维素及其水凝胶的制备和性能研究. 轻工学报, 2024, 39(6): 49-56. doi: 10.12187/2024.06.006

点击查看大图

计量

PDF下载量: 1
文章访问数: 93
引证文献数: 0

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

兰玉婷, 张逸飞, 郭佳慧, 等. 面向皮肤光电治疗术后热损伤护理的凝胶贴膜材料研究[J]. 轻工学报, 2025, 40(1): 120-126. doi: 10.12187/2025.01.014

引用本文: 兰玉婷, 张逸飞, 郭佳慧, 等. 面向皮肤光电治疗术后热损伤护理的凝胶贴膜材料研究[J]. 轻工学报, 2025, 40(1): 120-126. doi: 10.12187/2025.01.014

面向皮肤光电治疗术后热损伤护理的凝胶贴膜材料研究

作者简介:兰玉婷(1999—),女,湖南省湘潭市人,东华大学硕士研究生,主要研究方向为医用水凝胶材料。E-mail:lanyuting1224@163.com

通讯作者: 关国平, ggp@dhu.edu.cn

1. 上海市现代纺织前沿科学研究基地, 上海 201620;
2. 东华大学纺织学院, 上海 201620

收稿日期: 2024-03-27
录用日期: 2024-07-01

基金项目: 高等学校学科创新引智计划项目(BP0719035)

关键词:

摘要: 针对光电治疗术后皮肤热损伤问题,以κ-卡拉胶(κ-carrageenan,KC)和魔芋葡甘露聚糖(Konjac Glucomannan,KGM)为主要原料,开发一种用于术后皮肤热损伤护理的凝胶贴膜材料,并对其形态结构、力学性能、降温性能、理化性能等进行表征。结果表明:当KC与KGM的质量比为5.5∶4.5、总干物质质量浓度为10 g/L时,所制光电治疗|皮肤降温|凝胶贴膜|热损伤备的KC/KGM凝胶贴膜能在25 min内将人工皮肤表面温度从(61.28±0.52) ℃降至(37.88±0.55) ℃,且其拉伸断裂强度和断裂伸长率分别达(0.11±0.03) MPa和(160.63±5.92)%,压缩强度为(0.19±0.01) MPa。25 ℃时所制备凝胶贴膜的保湿率在25 min内保持在(86.04±1.72)%。此外,该凝胶贴膜外观透明且平整,具有良好的耐寒性和耐热性,且满足面膜行业标准《面膜》(QB/T 2872—2017)中所规定的相关感官及理化性能要求。

English Abstract

Study on gel film materials for thermal injury nursing following skin photoelectric therapy

Corresponding author: GUAN Guoping, ggp@dhu.edu.cn

1. Shanghai Frontiers Science Center of Advanced Textiles, Shanghai 201620, China;
2. College of Textiles, Donghua University, Shanghai 201620, China

Received Date: 2024-03-27
Accepted Date: 2024-07-01

Abstract: To address the problems of skin thermal damage after photoelectric therapy, κ-carrageenan and konjac glucomannan were used as the main raw materials to prepare a gel film material for skin cooling after photoelectric therapy, and its morphological structure, mechanical properties, cooling performance and physical and chemical properties were comprehensively characterized. The results showed that when the mass ratio of KC to KGM was 5.5∶4.5 and the mass concentration of the total dry matter was 10 g/L, the prepared KC/KGM gel film could reduce the surface temperature of artificial skin from (61.28±0.52) ℃ to (37.88±0.55) ℃ within 25 min. The tensile strength and elongation at break were (0.11±0.03) MPa and (160.63±5.92) %, respectively. The compressive strength can reach (0.19±0.01) MPa. The moisture retention rate of the gel film prepared at 25 ℃ was (86.04±1.72) % within 25 min. The appearance of the gel film was transparent and flat, the cold and hot resistance was satisfying, which met the relevant sensory and physical and chemical performance requirements specified in the mask standard (QB / T 2872—2017).