梗签含量和尺寸对卷烟物理指标影响及预测研究

叶政宏; 姬会福; 段鹍; 杨琦; 翁嘉凯; 顾甲甲; 邵惠芳; 丁美宙; 叶政宏; 姬会福; 段鹍; 杨琦; 翁嘉凯; 顾甲甲; 邵惠芳; 丁美宙

[1]

张晖, 张果, 侯佩, 等. 打叶复烤过程中片烟品质变化研究进展[J]. 农产品加工(下半月), 2017(4): 49-52, 57.
ZHANG H, ZHANG G, HOU P, et al. Advances in quality changes of Lamina of flue-cured tobacco during threshing and redrying process[J]. Aem Roducts Rocessing, 2017(4): 49-52, 57.

[2]

唐军, 何邦华, 易斌, 等. 国内卷烟加工过程烟草异物除杂技术研究进展[J]. 轻工学报, 2022, 37(2): 94-101.
TANG J, HE B H, YI B, et al. Research progress of tobacco foreign material eliminating technology for cigarette processing in China[J]. Journal of Light Industry, 2022, 37(2): 94-101.

[3]

唐习书, 田德兴, 方瑞萍, 等. 卷烟制造过程梗签分离工艺及装备研究进展[J]. 轻工学报, 2024, 39(4): 109-117.
TANG X S, TIAN D X, FANG R P, et al. Research progress on stem sliver separation process and equipment in cigarette manufacturing[J]. Journal of Light Industry, 2024, 39(4): 109-117.

[4]

张大波, 孔臻, 吴硕, 等. 国内细支卷烟加工工艺现状[J]. 烟草科技, 2018, 51(1): 79-84.
ZHANG D B, KONG Z, WU S, et al. Current situation of slim cigarette manufacturing technology in China[J]. Tobacco Science & Technology, 2018, 51(1): 79-84.

[5]

曾静, 李斌, 冯志斌, 等. 卷烟机剔除梗签物中含丝量的检测[J]. 烟草科技, 2012, 45(8): 5-7.
, 11. ZENG J, LI B, FENG Z B, et al. Determination of tobacco shred content in rejects from cigarette maker[J]. Tobacco Science & Technology, 2012, 45(8): 5-7, 11.

[6]

秦前浩. 卷烟工艺测试与分析大纲[M]. 成都: 四川大学出版社, 2004. QIN Q H. Outline for cigarette process testing and analysis[M]. Chengdu: Sichuan University Press, 2004.

[7]

彭永刚, 刘德凯, 杨华伦, 等. 降低卷烟机剔除梗签中含丝量[J]. 齐鲁工业大学学报(自然科学版), 2015, 29(1): 50-55.
PENG Y G, LIU D K, YANG H L, et al. Reduce cigarette-rolling machines remove stalks silk content[J]. Journal of Qilu University of Technology (Natural Science Edition), 2015, 29(1): 50-55.

[8]

胡中军, 李江, 陈智鸣, 等. 优化ZJ17卷接机参数降低烟支中梗签含量研究[J]. 科技创新导报, 2017, 14(8): 79-80.
HU Z J, LI J, CHEN Z M, et al. Study on optimizing parameters of ZJ17 cigarette splicer to reduce stem label content in cigarettes[J]. Science and Technology Innovation Herald, 2017, 14(8): 79-80.

[9]

王瑞雪, 朱强强, 唐习书, 等. 基于特征分布和判别分析的卷烟梗签识别方法建立与评价[J]. 热带农业科学, 2024, 44(11): 104-110.
WANG R X, ZHU Q Q, TANG X S, et al. Establishment and evaluation of a cigarette stick identification method based on characteristic value distribution and discriminant analysis[J]. Chinese Journal of Tropical Agriculture, 2024, 44(11): 104-110.

[10]

祁林, 刘兵, 王瑞雪, 等. 不同梗签含量对中支卷烟品质的影响[J]. 生物化工, 2024, 10(2): 97-99.
, 107. QI L, LIU B, WANG R X, et al. Effect of different sticks content on quality of tobacco products[J]. Biological Chemical Engineering, 2024, 10(2): 97-99, 107.

[11]

徐大勇, 邓国栋, 刘朝贤, 等. 烟支刺破梗签粒度分析[J]. 中国烟草学报, 2021, 27(1): 37-42.
XU D Y, DENG G D, LIU C X, et al. Particle size analysis of cigarette-puncturing slivers[J]. Acta Tabacaria Sinica, 2021, 27(1): 37-42.

[12]

陶发展, 杨栋, 洪伟龄, 等. 基于高光谱成像的烟丝中梗签分类识别研究[J]. 河南科技大学学报(自然科学版), 2024, 45(3): 32-42.
, 5. TAO F Z, YANG D, HONG W L, et al. Research on classification and recognition of stem sticks in shredded cut tobacco based on hyperspectral imaging[J]. Journal of Henan University of Science and Technology (Natural Science), 2024, 45(3): 32-42, 5.

[13]

郑新虎. 梗签分离装置中气流的流动分析及仿真研究型[D]. 昆明: 昆明理工大学, 2018. ZHENG X H. Flow analysis and simulation of air flow in a stems separation unit[D]. Kunming: Kunming University of Science and Technology, 2018.

[14]

王胜枝, 肖伟忠, 蔡培良, 等. 卷烟生产中梗签二次分离装置的设计[J]. 机械制造, 2018, 56(11): 64-66.
, 70. WANG S Z, XIAO W Z, CAI P L, et al. Design of secondary separation device for stem in cigarette production[J]. Machinery, 2018, 56(11): 64-66, 70.

[15]

国家烟草专卖局. 卷烟物理性能的测定重量：YC/T 28—1996[S]. 北京: 中国标准出版社, 1996. State Tobacco Monopoly Administration. Test of cigarettes physical characteristics Weight: YC/T 28-1996[S]. Beijing: China Standards Press, 2024.

[16]

国家烟草专卖局. 卷烟和滤棒物理性能的测定硬度: GB/T 22838—2024[S]. 北京: 中国标准出版社, 2024. State Tobacco Monopoly Administration. Determination of physical properties of cigarettes and filter rods Hardness: GB/T 22838—2024[S]. Beijing: China Standards Press, 2024.

[17]

国家烟草专卖局. 卷烟和滤棒物理性能的测定圆周激光法: GB/T 22838—2009[S]. 北京: 中国标准出版社, 2009. State Tobacco Monopoly Administration. Determination of physical properties of cigarettes and filter rods cigarette circumference laser method: GB/T 22838—2009[S]. Beijing: China Standards Press, 2009.

[18]

国家烟草专卖局. 卷烟和滤棒物理性能的测定卷烟吸阻和滤棒压降: GB/T 22838—2024[S]. 北京: 中国标准出版社, 2024. State Tobacco Monopoly Administration. Determination of physical properties of cigarettes and filter rods cigarette resistance to draw and filter rod pressure drop: GB/T 22838—2024[S]. Beijing: China Standards Press, 2024.

[19]

国家烟草专卖局. 卷烟和滤棒物理性能的测定卷烟通风的测定定义和测量原理: GB/T 22838—2009[S]. 北京: 中国标准出版社, 2009. State Tobacco Monopoly Administration. Determination of physical properties of cigarettes and filter rods determination of cigarette ventilation—definitions and measurement principles: GB/T 22838—2009[S]. Beijing: China Standards Press, 2009.

[20]

周沅桢, 和小娟, 王泽宇, 等. 基于CRITIC赋权法的细支烟物理指标综合质量评价研究[J]. 包装工程, 2022, 43(9): 176-183.
ZHOU Y Z, HE X J, WANG Z Y, et al. Comprehensive quality assessment for physical indexes of slim cigarette based on CRITIC weighting approach[J]. Packaging Engineering, 2022, 43(9): 176-183.

[21]

CHEN T Q, GUESTRIN C. XGBoost: A scalable tree boosting system[C]//Proceedings of the 22nd ACM SIGKDD International Conference on Knowledge Discovery and Data Mining. San Francisco, California USA. ACM, 2016: 785-794.

[22]

金彩洪, 刘松, 刘亚男. ZJ17卷接机组防止烟丝泄漏堵塞装置的设计与应用[J]. 现代制造技术与装备, 2021, 57(2): 31-32.
JIN C H, LIU S, LIU Y N. Design and application of device for preventing leakage and blockage of cut tobacco in ZJ17 cigarette making machine[J]. Modern Manufacturing Technology and Equipment, 2021, 57(2): 31-32.

[23]

姚二民, 邵宁, 李晓, 等. 基于回归分析方法的烟丝结构与卷烟物理指标关系研究[J]. 食品工业科技, 2017, 38(20): 21-24.
, 29. YAO E M, SHAO N, LI X, et al. Study on the relationship of cut tobacco structure and physical indexes of cigarette based on regression analysis[J]. Science and Technology of Food Industry, 2017, 38(20): 21-24, 29.

[24]

毛福利, 邓长其, 高华, 等. 卷烟烟支重量的综合评价[J]. 轻工科技, 2019, 35(8): 128-129.
MAO F L, DENG C Q, GAO H, et al. Comprehensive evaluation of cigarette weight[J]. Light Industry Science and Technology, 2019, 35(8): 128-129.

[25]

汪涛, 张灵辉, 叶宏音. 不同形态梗丝对卷烟在制品及成品质量的影响[J]. 安徽农业科学, 2013, 41(32): 12724-12726.
WANG T, ZHANG L H, YE H Y. Effects of different forms stem on quality of flue-cured products and finished products[J]. Journal of Anhui Agricultural Sciences, 2013, 41(32): 12724-12726.

[26]

张莉强, 李宇飞, 刘浩, 等. 在线打孔中支卷烟通风率稳定性的研究[J]. 中国新技术新产品, 2023(5): 70-73. ZHANG L Q, LI Y F, LIU H, et al. Study on the stability of ventilation rate of medium cigarette in on-line punching[J]. New Technology & New Products of China, 2023.
(5): 70-73.

[27]

赵汉文, 赵晓梅. 卷烟机平整器对卷烟质量稳定性的影响[J]. 烟草科技, 2007, 40(12): 22-23.
, 62. ZHAO H W, ZHAO X M. Influence of ecreteur disc in cigarette maker on cigarette quality stability[J]. Tobacco Science & Technology, 2007, 40(12): 22-23, 62.

[28]

陈景云, 李东亮, 夏莺莺, 等. 梗丝分布形态对其掺配均匀度的影响[J]. 烟草科技, 2004, 37(8): 8-10.
CHEN J Y, LI D L, XIA Y Y, et al. Effects of cut stem size distribution on its blending uniformity in cigarette[J]. Tobacco Science & Technology, 2004, 37(8): 8-10.

[29]

陈士欢, 叶超, 罗登炎, 等. 基于CT探测成像的烟支中梗签形态识别及参数分析方法[J]. 烟草科技, 2026, 59(2): 44-55.
CHEN S H, YE C, LUO D Y, et al. Morphological identification and parameter analysis of tobacco stems in cigarettes based on CT detection and imaging[J]. Tobacco Science & Technology, 2026, 59(2): 44-55. =.