[1] 李昕昕,刘强,陈从鑫,等.纸质滤嘴棒的研究进展[J].造纸科学与技术,2025,44(4):12-15.
,27. LI X X,LIU Q,CHEN C X,et al.Progress in the study of paper filter sticks[J].Paper Science & Technology,2025,44(4):12-15,27.
[2] 杨彩虹,潘昱亭,朱开林,等.基于光电和吸阻综合检测的卷烟二元复合滤棒残缺检测装置[J].机电工程技术,2025,54(11):170-174.
YANG C H,PAN Y T,ZHU K L,et al.Defect detection device of cigarette binary composite filter rod based on photo-electric and suction resistance comprehensive detection[J].Mechanical & Electrical Engineering Technology,2025,54(11):170-174.
[3] 李国智,朱雪峰,龙雨蛟,等.不同卷烟机用低温快干搭口胶的工艺参数优化及应用[J].中国胶粘剂,2017,26(12):4-7.
LI G Z,ZHU X F,LONG Y J,et al.Optimization and application of technological parameters of low-temperature fast-drying cigarette lap adhesive for different cigarette rolling machines[J].China Adhesives,2017,26(12):4-7.
[4] 杨琛琛,郭素芳,熊亚妹,等.卷烟吸阻和硬度稳定性影响因素研究[J].云南化工,2021,48(9):42-44.
YANG C C,GUO S F,XIONG Y M,et al.Study on factors affecting cigarette smoking resistance and hardness stability[J].Yunnan Chemical Technology,2021,48(9):42-44.
[5] 王瀚乐,杨荣超,张鹏飞,等.基于大气压力补偿的卷烟吸阻检测仪器校准方法[J].烟草科技,2024,57(6):85-91.
WANG H L,YANG R C,ZHANG P F,et al.Calibration method for cigarette draw resistance tester based on atmospheric pressure compensation[J].Tobacco Science & Technology,2024,57(6):85-91.
[6] 崔春,孟祥士,纪朋,等.陈皮爆珠对卷烟常规理化指标和感官品质的影响[J].轻工学报,2019,34(5):40-46.
CUI C,MENG X S,JI P,et al.Effect of tangerine essence breakable capsule on regular physicochemical characteristics and sensory quantity of cigarettes[J].Journal of Light Industry,2019,34(5):40-46.
[7] 喻森,杨涛,徐兴阳,等.环境湿度对卷烟抽吸品质的影响研究[J].轻工学报,2020,35(5):33-40.
YU S,YANG T,XU X Y,et al.Study on the influence of environmental humidity on smoking quality of cigarettes[J].Journal of Light Industry,2020,35(5):33-40.
[8] 刘禹江.基于模糊-Smith的滤棒成型温度控制算法研究[J].沈阳航空航天大学学报,2013,30(6):44-47.
LIU Y J.On temperature control algorithm for filter rods based on Fuzzy-Smith control[J].Journal of Shenyang Aerospace University,2013,30(6):44-47.
[9] 何屹,杨本刚,蔡持,等.聚乙烯醇水基胶对卷烟中空滤棒的粘接强度影响因素研究[J].塑料工业,2024,52(1):129-135.
HE Y,YANG B G,CAI C,et al.Study on influence factors of polyvinyl alcohol water-based adhesives on the bonding strength of cigarette hollow filter rod[J].China Plastics Industry,2024,52(1):129-135.
[10] 曹贵昌,刘文富,董彦林,等.卷烟胶的发展概况[J].轻工科技,2019,35(1):18-19.
CAO G C,LIU W F,DONG Y L,et al.Development of cigarette gum[J].Light Industry Science and Technology,2019,35(1):18-19.
[11] 耿志忠,刁立翔,杨帆,等.烟用热熔胶及其粘接材料表面性能的研究[J].粘接,2022,43(1):46-50.
GENG Z Z,DIAO L X,YANG F,et al.Research on the surface properties of hot melt adhesive and packing materials in the cigarette industry[J].Adhesion,2022,43(1):46-50.
[12] KOSTYUK A V,SMIRNOVA N M,ANTONOV S V,et al.Rheological and adhesion properties of hot-melt adhesives based on hydrocarbon resins and poly(ethylene-vinyl acetate)[J].Polymer Science,Series A,2021,63(3):283-295.
[13] 郭宏伟.浅析KDF2滤棒成型机虑棒爆口故障及改进方法[J].企业导报,2011(22):207. GUO H W.Brief analysis on the failure of filter rod burst of KDF2 filter rod forming machine and its improvement method[J].Guide to Business,2011.
(22):207.
[14] SHI Q L,FANG Z X,BHANDARI B.Effect of addition of whey protein isolate on spray-drying behavior of honey with maltodextrin as a carrier material[J].Drying Technology,2013,31(13/14):1681-1692.
[15] 古丽米热·如苏力,李莎,王昆银,等.谷朊粉对冻干枣粉抑制吸湿作用研究[J].食品安全质量检测学报,2022,13(11):3602-3610.
GULIMIRE R S L,LI S,WANG K Y,et al.Study of wheat gluten on hygroscopicity inhibition of freeze-dried jujube powder[J].Journal of Food Safety & Quality,2022,13(11):3602-3610.
[16] 郝光宗,邢丽缘,梁强威.饱和盐水溶液湿度固定点(2):数据来源与盐溶液选择[J].传感器世界,1999,5(12):10-14.
HAO G Z,XING L Y,LIANG Q W.Humidity fixed points of saturated aqueous solutions of salts(2):data sources and salt solution selection[J].Sensor World,1999,5(12):10-14.
[17] 王勇,缪华丽,乐翔,等.涂层功能整理织物剥离强度方法建立及影响因素探究[J].印染助剂,2024,41(8):53-57.
WANG Y,MIAO H L,LE X,et al.Establishment of peel strength method for coating functional finishing fabrics and study of influencing factors[J].Textile Auxiliaries,2024,41(8):53-57.
[18] 陈征辉,赵宏飞,钟进,等.影响胶粘剂胶接性能的因素分析[J].高科技纤维与应用,2020,45(2):37-40.
CHEN Z H,ZHAO H F,ZHONG J,et al.Factor analysis for bonding strength of the adhesive[J].Hi-Tech Fiber and Application,2020,45(2):37-40.
[19] 刘金宝,杜飞,刘韶霞,等.使用环境对高分子自粘胶膜防水卷材自粘搭接边剥离强度的影响研究[J].中国建筑防水,2021(8):9-13. LIU J B,DU F,LIU S X,et al.Study on effect of service environment on peel strength of self-adhesive overlap edge of self-adhesive polymer film reinforced waterproofing membrane[J].China Building Waterproofing,2021.
(8):9-13.
[20] 徐淑浩,李国智,朱雪峰,等.低温快干卷烟搭口胶的制备与应用[J].粘接,2018,45(3):48-52.
,47. XU S H,LI G Z,ZHU X F,et al.Preparation and application of low-temperature and fast-drying cigarette lap adhesive[J].Adhesion,2018,45(3):48-52,47.
[21] 吴艾林,邓化清,李铭.胶粘剂粘接性能受环境因素的相关影响研究[J].粘接,2020,47(1):33-36.
,44. WU A L,DENG H Q,LI M.Study on the influence of environmental factors on the bonding properties of adhesives[J].Adhesion,2020,47(1):33-36,44.
[22] QIN C X,MA Y F,ZHANG Z Z,et al.Water-assisted strong underwater adhesion via interfacial water removal and self-adaptive gelation[J].Proceedings of the National Academy of Sciences of the United States of America,2023,120(31):e2301364120.
[23] WU Z J,SHANGGUAN Y G,ZHANG C H,et al.Effects of crosslinking and silicone coupling agent on properties of EVA composite hot melt adhesive[J].Polymers,2021,13(23):4101-4111.