Research hotspot and evolution analysis of module division at home and abroad based on knowledge graph

Abstract

Keywords:
• module division,
• CiteSpace,
• knowledge graph,
• visual analysis,
• research hotspot

References

1. [1]

   龚京宗.基于FPBS的机械系统模块化设计方法与应用研究[D].长沙:国防科学技术大学,2008.
   

2. [2]

   高飞,肖刚,潘双夏,等.产品功能模块划分方法[J].机械工程学报,2007,43(5):33.
   

3. [3]

   李彬,王宗彦,秦慧斌.桥式起重机的模块化配置设计研究[J].机械设计与制造,2013(2):265.
   

4. [4]

   NEWCOMB P J,BRAS B,ROSEN D W.Implications of modularity on product design for the life cycle[J].Journal of Mechanical Design,1998,120(3):483.

5. [5]

   潘双夏,高飞,冯培恩.批量客户化生产模式下的模块划分方法研究[J].机械工程学报,2003,39(7):5.
   

6. [6]

   肖莹姣,陈友玲,周玉杰.面向订单的模块化时间定额的确定方法[J].计算机应用研究,2011,28(4):162.
   

7. [7]

   李婷婷,龚京忠,李国喜,等.可维修性驱动的模块划分[J].机械设计与制造,2007(2):166.
   

8. [8]

   候剑华,胡志刚.CiteSpace软件应用研究的回顾与展望[J].现代情报,2013,33(4):99.
   

9. [9]

   胡泽文,孙建军,武夷山.国内知识图谱应用研究综述[J].图书情报工作,2013,57(3):131.
   

10. [10]

    KIM M C,CHEN C.A scientometric review of emerging trends and new developments in recommendation systems[J].Scientometrics,2015,104(1):239.

11. [11]

    刘佳,韩毅.中外图书情报学研究热点的可视化及对比分析[J].情报科学,2014,32(12):53.
    

12. [12]

    陈航,殷国富,赵伟,等.工业机器人模块化设计研究[J].机械,2009,36(3):56.
    

13. [13]

    尹健,杨宁,王妍,等.基于结构模块化的微型山地稻麦联合收割机设计[J].农机化研究,2011,33(11):106.
    

14. [14]

    谌炎辉,周德俭,袁海英,等.复杂产品的最小最大划分模块化方法[J].计算机集成制造系统,2012,18(1):11.
    

15. [15]

    王日君,张进生,葛培琪,等.模块化设计中模块划分方法的研究[J].组合机床与自动化加工技术,2008(7):17.
    

16. [16]

    胡浩平,刘电霆.基于绿色模块划分的多目标蚁群算法[J].制造技术与机床,2016,643(1):73.
    

17. [17]

    NEWMAN M E J.Modularity and community structure in networks[J].Proceedings of the National Academy of Sciences,2006,103(23):8577.

18. [18]

    SHEN H W,CHENG X Q,GUO J F.Quantifying and identifying the overlapping community structure in networks[J].Journal of Statistical Mechanics:Theory and Experiment,2009,2009(7):7042.

19. [19]

    ROSEN R,VON WICHERT G,LO G,et al.About the importance of autonomy and digital twins for the future of manufacturing[J].IFAC-PapersOnLine,2015,48(3):567.

20. [20]

    HERATH K,PRAKASH A,GUIYUAN J,et al.Ant colony optimization based module footprint selection and placement for lowering power in large FPGA designs[C]//2018 International Conference on ReConFigurable Computing and FPGAs (ReConFig).Piscataway:IEEE,2018:1.

21. [21]

    MOTOHASHI K.Assessment of technological capability in science industry linkage in China by patent database[J].World Patent Information,2008,30(3):225.

22. [22]

    王若佳,李颖.基于知识图谱的国际和国内竞争情报对比研究[J].情报杂志,2016,35(1):74.
    

23. [23]

    CHEN J,YUAN B.Detecting functional modules in the yeast protein-protein interaction network[J].Bioinformatics,2006,22(18):2283.

24. [24]

    任小中,邓效忠,苏建新,等.数控成形磨齿机计算机辅助模块化设计[J].农业机械学报,2008,39(2):144.
    

25. [25]

    宋扬,金会庆,张维一,等.本体模块化的研究[J].计算机应用与软件,2009,26(3):184.
    

26. [26]

    刘琼,顾浩,刘骏,等.基于熵值的尿路感染疾病基因网络的模块划分与生物学机制分析[J].基因组学与应用生物学,2018,37(10):4676.
    

27. [27]

    范泽兵,胡杨,吴锋,等.航空发动机高空模拟试车台架参数化设计研究[J].燃气涡轮试验与研究,2018,31(3):53.
    

28. [28]

    FARRITOR S,DUBOWSKY S.On modular design of field robotic systems[J].Autonomous Robots,2001,10(1):57.

29. [29]

    ALM E,ARKIN A P.Biological networks[J].Current Opinion in Structural Biology,2003,13(2):193.

30. [30]

    AMINIAN M,AMINIAN F.A modular fault-diagnostic system for analog electronic circuits using neural networks with wavelet transform as a preprocessor[J].IEEE Transactions on Instrumentation & Measurement,2007,56(5):1546.

31. [31]

    LORENZ D M,JENG A,DEEM M W.The emer-gence of modularity in biological systems[J].Physics of Life Reviews,2011,8(2):129.

32. [32]

    KOLCHINSKY A,GATES A J,ROCHA L M.Modularity and the spread of perturbations in complex dynamical systems[J].Physical Review E,2015,92(6):060801.

Proportional views