卷烟纸参数对中支卷烟常规烟气成分释放量及其符合度的影响
The influence of cigarette paper parameters on the release of routine smoke components of demi-slim cigarettes and their conformity
-
摘要: 以中支卷烟为研究对象,采用均匀设计方法研究了卷烟纸灰分含量、透气度、定量、助燃剂添加量和钾钠比对焦油等3种常规烟气成分释放量的影响,将释放量实测值与盒标值间的相对偏差转换为符合度,并研究卷烟纸参数对烟气成分释放量符合度的影响。结果表明:1)高灰分含量、高定量、高助燃剂添加量、高钾钠比及中高透气度的卷烟纸有利于降低中支卷烟常规烟气成分释放量,该影响趋势与常规卷烟基本一致;2)符合度有利于比较不同盒标值卷烟及不同烟气成分的控制水平;3)影响各种烟气成分符合度的因素与释放量基本一致,但趋势不同,卷烟纸参数对烟气成分符合度的影响有其独特的规律性。通过符合度设计可以为卷烟纸参数的优化提供一个边界,能够在保证烟气成分符合度要求的前提下改进卷烟品质。Abstract: Taking demi-slim cigarettes as the research object, the effects of ash content, air permeability, quantity, the content of combustion aids and the ratio of potassium to sodium on the release of tar and other two routine smoke components from cigarette paper were studied by uniform design method. The relative deviation between the measured release and the box standard value was converted into the coincidence degree and the influence of cigarette paper parameters on the coincidence degree of smoke composition was studied. The results showed that the cigarette paper with high ash content, high quantity, high content of combustion-supporting agent, high ratio of potassium to sodium, and medium and high permeability was beneficial to reduce the release of components of conventional cigarette smoke, and the influence trend was basically consistent with that of conventional cigarette. The conformity degree was beneficial to comparing the control level of different box-marked cigarettes and different components of cigarette smoke. The factors affecting the conformity degree of various components of cigarette smoke were basically consistent with the release amount, but the trend was different, and the influence of cigarette paper parameters on the conformity degree of components of cigarette smoke had its unique regularity. It could provide a boundary for the optimization of cigarette paper parameters and improve other cigarette qualities more efficiently while ensuring the conformity of cigarette components.
-
Key words:
- demi-slim cigarette /
- cigarette paper parameter /
- routine smoke component /
- conformity
-
-
[1]
黄华,戴路,周炜,等.水松纸透气度对中支卷烟主流烟气及燃烧温度的影响[J/OL].华东理工大学学报(自然科学版)[2022-09-20].http://doi.org/10.14135/j.cnki.1006-3080.20220126001.
-
[2]
杨金龙,王文婷,朱萍,等.接装纸透气度对卷烟烟气及感官质量影响的PLS回归分析[J].湖南文理学院学报(自然科学版),2021,33(3):86-90.
-
[3]
田志章,李海霞,张春涛,等.卷烟纸及烟丝钾钠比差异对卷烟主流烟气影响[J].食品工业,2019,40(9):170-173.
-
[4]
张国强,黄朝章.卷烟纸的透气度等设计参数对卷烟主流烟气中氨释放量及焦油含量的影响[J].郑州轻工业学院学报(自然科学版),2014,29(5):39-43.
-
[5]
谢国勇,李斌,颜水明,等.卷烟纸特性对卷烟烟气7种有害成分的影响[J].湖南师范大学自然科学学报,2013,36(5):51-58.
-
[6]
刘光伟,郭磊,李山,等.卷烟材料对焦油及危害性指数影响研究[J].中国农业文摘:农业工程,2021,33(3):38-42.
-
[7]
黄朝章,李桂珍,连芬燕,等.卷烟纸特性对卷烟主流烟气7种有害成分释放量的影响[J].烟草科技,2011(4):29-32.
-
[8]
LUO W,YIN D H,DING D,et al. Effect of pore structure of cigarette paper on the yield of carbon monoxide in mainstream smoke during cigarette burning[J].Contributions to Tobacco Research,2015,26(6):284-292.
-
[9]
陈泽亮,罗玮,刘又年,等.碳酸钙粒径与含量对卷烟纸微孔结构及主流烟气CO释放量的影响[J].烟草科技,2015,48(5):41-46.
-
[10]
董艳娟,田海英,高明奇,等.卷烟纸参数对细支卷烟烟气常规成分释放量的影响[J].烟草科技,2018,51(6):51-57.
-
[11]
张亚平,张晓宇,周顺,等.卷烟纸组分对常规和细支卷烟烟气释放量及感官质量的影响[J].烟草科技,2017,50(11):48-57.
-
[12]
郑丰,肖翠翠,王小平,等.卷烟纸特性对卷烟静态包灰性能的影响[J].烟草科技,2020,53(3):82-88.
-
[13]
李欢,王建民,王豪礼,等.卷烟纸参数对卷烟持灰能力的影响[J].食品与机械,2021,37(6):207-212.
-
[14]
李桂珍,王平军.卷烟纸添加剂对卷烟包灰性能影响的研究[J].造纸化学品,2011,23(4):17-21.
-
[15]
中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.卷烟 用常规分析用吸烟机测定总粒相物和焦油:GB/T 19609—2004[S].北京:中国标准出版社,2004.
-
[16]
中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.卷烟 总粒相物中烟碱的测定 气相色谱法:GB/T 23355—2009[S].北京:中国标准出版社,2009.
-
[17]
中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.卷烟 烟气气相中一氧化碳的测定 非散射红外法:GB/T 23356—2009[S].北京:中国标准出版社,2009.
-
[18]
中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.卷烟和滤棒物理性能的测定 第5部分 卷烟吸阻和滤棒压降:GB/T 22838.5—2009[S].北京:中国标准出版社,2009.
-
[19]
中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.卷烟和滤棒物理性能的测定 第15部分 卷烟 通风的测定 定义和测量原理:GB/T 22838.15—2009[S].北京:中国标准出版社,2009.
-
[20]
中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会. 卷烟 第5部分:主流烟气:GB 5606.5—2005[S].北京:中国标准出版社,2005.
-
[21]
彭钰涵,帖金鑫,沈羽东,等.烟用材料对卷烟燃烧特性和烟气特征的影响机制[J].农产品加工,2021(11):16-21,25.
-
[1]
-
点击查看大图
计量
- PDF下载量: 24
- 文章访问数: 5492
- 引证文献数: 0
下载:
