内部结构设计对3D打印全麦曲奇饼干品质的影响

石振兴; 柴浩浩; 仵华君; 朱莹莹; 么杨

doi:10.12187/2024.06.002

内部结构设计对3D打印全麦曲奇饼干品质的影响

1. 河南工业大学粮油食品学院, 河南郑州 450001;
2. 郑州轻工业大学食品与生物工程学院, 河南郑州 450001;
3. 绿色食品(绿色优质农产品)高质量创新发展郑州技术中心和农产品品质规格营养功能评价郑州加工技术中心, 河南郑州 450001;
4. 中国农业科学院作物科学研究所, 北京 100081

作者简介: 石振兴(1989—),男,河北省衡水市人,河南工业大学讲师,博士,主要研究方向为食品加工技术。E-mail:shizhenxing@caas.cn;

基金项目: 河南省科技攻关项目(项目号222102110107)
中图分类号: TS213.2

Effect of internal structure design on the quality of 3D printed whole wheat cookies

1. College of Food Science and Engineering, Henan University of Technology, Zhengzhou 450001, China;
2. College of Food and Bioengineering, Zhengzhou University of Light Industry, Zhengzhou 450001, China;
3. Green Food (Green and High Quality Agricultural Products) High Quality Innovation Development Zhengzhou Technology Center and Nutritional Function Evaluation of Agricultural Products Quality Specifications Zhengzhou Processing Technology Center, Zhengzhou 450001, China;
4. Institute of Crop Sciences, Chinese Academy of Agricultural Sciences, Beijing 100081, China
Received Date: 2024-05-04
Accepted Date: 2024-07-11
Available Online: 2024-12-15
CLC number: TS213.2

摘要: 采用3D打印技术,以全麦粉为主要原料,设计3种不同内部结构(4孔、9孔和16孔)的3D打印全麦曲奇饼干,考查内部结构设计对物料打印特性及产品感官品质、质构特性和消化特性的影响。结果表明:4孔结构全麦曲奇饼干面糊的打印流畅性最好;16孔结构3D打印全麦曲奇饼干坯的内部和表观结构打印精度及烘焙后的表观结构稳定性均最高;9孔结构3D打印全麦曲奇饼干的综合感官评分((90.00±1.25)分)显著高于4孔((73.00±2.63)分)和16孔((72.00±1.70)分)结构3D打印全麦曲奇饼干(P<0.05);16孔结构3D打印全麦曲奇饼干的硬度((1 355.90±197.74) g)和脆度((1 152.50±49.67) g)均较低(P<0.05),淀粉体外消化率(57.61%)和糊化度((35.11±1.83)%)均最低。综上,当内部结构设计为16孔时,有利于生产打印精度较高、稳定性较好、感官品质较佳、消化率较低且适合糖尿病患者食用的3D打印全麦曲奇饼干。
- 内部结构设计 /
- 3D打印技术 /
- 全麦曲奇饼干 /
- 打印特性 /
- 感官品质 /
- 消化特性
Abstract: Using whole wheat flour as the main raw material, three kinds of 3D printed whole wheat cookies with different internal structures (4-hole, 9-hole and 16-hole) were designed with 3D printing technology, and the effects of internal structural design on the printing characteristics of materials, sensory quality, texture characteristics and digestive characteristics of products were investigated. The results showed that 4-hole structure whole wheat cookie batter provided the best printing fluency. The 16-hole structure 3D printing of whole wheat cookie dough exhibited the highest internal and apparent structure printing accuracy and the highest apparent structure stability after baking. The comprehensive sensory scores of 9-hole structure 3D printed whole wheat cookie ((90.00±1.25) points) were significantly higher than those of 4-hole structure 3D printed whole wheat cookie (73.00±2.63) points and 16-hole structure 3D printed whole wheat cookie (72.00±1.70) points (P<0.05). The hardness ((1 355.90±197.74) g) and brittleness ((1 152.50±49.67) g) of 16-hole structure 3D printed whole wheat cookies were lower (P<0.05), and the in vitro digestibility of starch (57.61%) and pasting degree ((35.11±1.83) %) were the lowest. In conclusion, the internal structure design with 16-hole was advantageous for producing 3D printed whole-wheat cookies with higher printing accuracy, better stability, superior sensory quality, lower digestibility and suitable for diabetic patients.
- internal structure design /
- 3D printing technology /
- whole wheat cookie /
- printing characteristic /
- sensory quality /
- digestive characteristic
1. [1]
  董晓伟.全麦粉对曲奇饼干品质影响研究[D].郑州:河南工业大学,2016.
2. [2]
  HUANG L,DONG J L,ZHANG K Y,et al.Thermal processing influences the physicochemical properties,in vitro digestibility and prebiotics potential of germinated highland barley[J].LWT-Food Science and Technology,2021,140:110814.
3. [3]
  GODOI F C,PRAKASH S,BHANDARI B R. 3D printing technologies applied for food design:Status and prospects[J].Journal of Food Engineering,2016,179:44-54.
4. [4]
  LIU L L,YANG X P,BHANDARI B,et al.Optimization of the formulation and properties of 3D-printed complex egg white protein objects[J].Foods,2020,9(2):164.
5. [5]
  PÉREZ B,NYKVIST H,BRØGGER A F,et al.Impact of macronutrients printability and 3D-printer parameters on 3D-food printing:A review[J].Food Chemistry,2019,287:249-257.
6. [6]
  MANIGLIA B C,LIMA D C,DA MATTA M,et al.Dry heating treatment:A potential tool to improve the wheat starch properties for 3D food printing application[J].Food Research International,2020,137:109731.
7. [7]
  LIU Z B, DICK A,PRAKASH S,et al.Texture modification of 3D printed air-fried potato snack by varying its internal structure with the potential to reduce oil content[J].Food and Bioprocess Technology,2020,13(3):564-576.
8. [8]
  CARVAJAL-MENA N,TABILO-MUNIZAGA G,PÉREZ-WON M,et al.Influence of starch-protein interactions on the digestibility and chemical properties of a 3D-printed food matrix based on salmon by-product proteins[J].Food Research International,2024,179:114035.
9. [9]
  陈玲,郑波,钟少文,等.一种基于3D打印技术调节青稞淀粉消化性能的方法:106962896A[P].2017-07-21.
10. [10]
  LIU Z B,ZHANG M,YANG C H.Dual extrusion 3D printing of mashed potatoes/strawberry juice gel[J].LWT-Food Science and Technology,2018,96:589-596.
11. [11]
  LIU Y W,LIANG X,SAEED A,et al.Properties of 3D printed dough and optimization of printing parameters[J].Innovative Food Science & Emerging Technologies,2019,54:9-18.
12. [12]
  GHOLAMIPOUR-SHIRAZI A,KAMLOW M A,NORTON I T et al.How to formulate for structure and texture via medium of additive manufacturing: A review[J].Foods,2020,9(4):497.
13. [13]
  FENG C Y,ZHANG M,BHANDARI B,et al.Use of potato processing by-product:Effects on the 3D printing characteristics of the yam and the texture of air-fried yam snacks[J].LWT-Food Science and Technology,2020,125:109265.
14. [14]
  CAULIER S,DOETS E,NOORT M.An exploratory consumer study of 3D printed food perception in a real-life military setting[J].Food Quality and Preference,2020,86:104001.
15. [15]
  易生奎.超声-高速剪切改性大豆豆渣不溶性膳食纤维用于3D打印曲奇饼干的研究[D].雅安:四川农业大学,2022.
16. [16]
  刘新华,韩风,朱潇,等.马铃薯全粉面团特性及其韧性饼干制备[J].粮食与油脂,2023,36(3):31-35.
17. [17]
  戢得蓉,乔明锋,何江红,等.慈姑全粉对曲奇饼干品质影响及配方研究[J].食品研究与开发,2019,40(15):130-136.
18. [18]
  葛飞.制粉与挤压改性对青稞粉理化特性及饼干食用品质改良研究[D].南京:南京财经大学,2023.
19. [19]
  刘汶鹏,解迪,邹险峰,等.挤压膨化对玉米豆粕混合物糊化度及脲酶活性的影响[J].粮食与油脂,2018,31(2):76-79.
20. [20]
  刘振彬.马铃薯泥及其淀粉混合凝胶体系的挤出型3D打印及后加工适应性研究[D].无锡:江南大学,2020.
21. [21]
  NEAMAH H A,TANDIO J.Towards the development of foods 3D printer:Trends and technologies for foods printing[J].Heliyon,2024,10(13):e33882.
22. [22]
  郎双静,李振江,武彦春,等.球磨微细化处理绿豆淀粉的结构、理化及3D打印特性变化[J].现代食品科技,2023,39(8):69-76.
23. [23]
  陈梦.小麦颗粒粉面团发酵特性及馒头制作品质研究[D].郑州:河南工业大学,2023.
24. [24]
  李玉美,刘玉花,魏冰,等.美拉德反应及其对饼干烘烤过程的影响[J].食品工业,2023,44(8):5-8.
25. [25]
  朱玥.壳寡糖对饼干和蛋糕品质的影响[D].武汉:武汉轻工大学,2021.
26. [26]
  陈伟,陈建设.食品的质构及其性质[J].中国食品学报,2021,21(1):377-384.
27. [27]
  莫西亚,全珂,易翠平.谷物中淀粉-蛋白质相互作用研究进展[J].中国粮油学报,2021,36(10):196-202.
28. [28]
  姬艺琳,陈文文,董吉林,等.青稞全谷营养型挂面与市售挂面的营养组分及理化特性研究[J].轻工学报,2023,38(5):51-58.
29. [29]
  SRIKAEO K,SANGKHIAW J.Effects of amylose and resistant starch on glycaemic index of rice noodles[J].LWT-Food Science and Technology,2014,59(2):1129-1135.
30. [30]
  徐敬欣,冯旸旸,于栋,等.淀粉糊化度测量方法研究进展[J].食品工业科技,2019,40(22):334-339.
31. [31]
  李云龙,董桂梅,董吉林,等.不同糊化度苦荞粉理化性质和体外消化性的研究[J].中国粮油学报,2021,36(3):21-27.
32. [32]
  邓佳琪.不同热加工方式对燕麦粉理化性质及体外消化性能的影响[D].湘潭:湘潭大学,2022.
1. [1]
  钟昕怡 , 陈紫麟 , 骆勇 , 汪高玮 , 王周利 , 赵子丹 , 李鸣雷 . 香菇-大球盖菇复合饼干研制及其品质特性分析. 轻工学报, 2024, 39(6): 27-36. doi: 10.12187/2024.06.004
2. [2]
  李杉 , 姜千一 , 孙冰华 , 温纪平 , 王晓曦 . 麦麸糊粉层粉对面团及手抓饼品质特性的影响. 轻工学报, 2024, 0(0): -.
3. [3]
  李杉 , 姜千一 , 孙冰华 , 温纪平 , 王晓曦 . 麦麸糊粉层粉对混合粉、面团及手抓饼品质特性的影响. 轻工学报, 2024, 39(6): 18-26. doi: 10.12187/2024.06.003
4. [4]
  胡新楠 , 朱成凯 , 胡中泽 , 纪执立 , 金伟平 , 郭城 , 沈汪洋 . 复配比对明胶-羟丙基甲基纤维素双水相体系微观结构和流变特性的影响. 轻工学报, 2024, 0(0): -.
5. [5]
  吕金羚 , 傅亮 , 陈永生 . 红茶-花生蛋白复合饮品工艺优化及其营养特性研究. 轻工学报, 2024, 0(0): -.
6. [6]
  吕金羚 , 傅亮 , 陈永生 . 红茶-花生蛋白复合饮品工艺优化及其营养特性研究. 轻工学报, 2024, 39(5): 9-17. doi: 10.12187/2024.05.002
7. [7]
  尹思睿 , 冯娇 , 杨晓宇 , 李良 . 植物蛋白复配对植物肉品质的影响. 轻工学报, 2024, 39(5): 18-28. doi: 10.12187/2024.05.003
8. [8]
  赵悦 , 闫清泉 , 李玲玉 , 司阔林 , 宗学醒 . 钙螯合盐对牛奶-豌豆双蛋白再制干酪品质的影响. 轻工学报, 2024, 39(5): 1-8. doi: 10.12187/2024.05.001
9. [9]
  朱晓兰 , 李宽 , 赵勇 , 袁广翔 , 汪金玲 , 俞京 . 酶萃取及组氨酸Heyns化合物加香对再造梗丝品质的影响. 轻工学报, 2024, 0(0): -.
10. [10]
  胡仙妹 , 于美逍 , 杨雪鹏 , 张展 , 尹献忠 . 木醋杆菌和酿酒酵母混菌发酵对烟用细菌纤维素品质的影响. 轻工学报, 2024, 39(6): 84-92. doi: 10.12187/2024.06.010
11. [11]
  朱晓兰 , 李宽 , 赵勇 , 袁广翔 , 汪金玲 , 俞京 . 酶萃取及组氨酸Heyns化合物加香对再造梗丝品质的影响. 轻工学报, 2024, 39(6): 77-83. doi: 10.12187/2024.06.009
12. [12]
  张改红 , 许航 , 杜帅 , 徐月莹 , 石栋栋 , 薛晶晶 , 尚紫博 , 毛多斌 . 麦芽酚-β-D-葡萄糖苷的稳定性及其在卷烟加香中的应用. 轻工学报, 2024, 39(5): 102-108. doi: 10.12187/2024.05.012
13. [13]
  卢晓波 , 徐海 , 朱俊召 , 张宇 , 谭健 , 高冠男 , 胡军华 , 林龙 . 基于机器视觉的加热卷烟烟支端部质量检测系统设计. 轻工学报, 2024, 0(0): -.
14. [14]
  卢晓波 , 徐海 , 朱俊召 , 张宇 , 谭健 , 高冠男 , 胡军华 , 林龙 . 基于机器视觉的加热卷烟烟支端部质量检测系统设计. 轻工学报, 2024, 39(6): 101-107,115. doi: 10.12187/2024.06.012
15. [15]
  倪众 , 楚鹏飞 , 林颖 , 刘玉欣 . 低温长时间热处理过程中氧化和加热对海参体壁胶原纤维结构的影响. 轻工学报, 2024, 0(0): -.

点击查看大图

计量

PDF下载量: 8
文章访问数: 332
引证文献数: 0

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

内部结构设计对3D打印全麦曲奇饼干品质的影响

作者简介: 石振兴(1989—),男,河北省衡水市人,河南工业大学讲师,博士,主要研究方向为食品加工技术。E-mail:shizhenxing@caas.cn;

Effect of internal structure design on the quality of 3D printed whole wheat cookies

计量

通讯作者: 陈斌, bchen63@163.com

内部结构设计对3D打印全麦曲奇饼干品质的影响

作者简介:石振兴(1989—),男,河北省衡水市人,河南工业大学讲师,博士,主要研究方向为食品加工技术。E-mail:shizhenxing@caas.cn

English Abstract

Effect of internal structure design on the quality of 3D printed whole wheat cookies

目录

内部结构设计对3D打印全麦曲奇饼干品质的影响

作者简介: 石振兴(1989—),男,河北省衡水市人,河南工业大学讲师,博士,主要研究方向为食品加工技术。E-mail:shizhenxing@caas.cn;

Effect of internal structure design on the quality of 3D printed whole wheat cookies

计量

文章相关

通讯作者: 陈斌, bchen63@163.com

内部结构设计对3D打印全麦曲奇饼干品质的影响

作者简介:石振兴(1989—),男,河北省衡水市人,河南工业大学讲师,博士,主要研究方向为食品加工技术。E-mail:shizhenxing@caas.cn

English Abstract

Effect of internal structure design on the quality of 3D printed whole wheat cookies

目录