Effects of processing parameters on cigarette smoking smoothness

Abstract

Keywords:
• cigarette,
• processing parameters,
• porosity,
• dynamic draw resistance,
• smoking smoothness

References

1. [1]

   木子.大品牌的双翼——高品质与真特色[N].东方烟草报,2012-03-09(6). MU Z.The two wings of big brands:High quality and true characteristics[N].Oriental Tobacco News,2012
   -03-09(6).

2. [2]

   鲁平,楚文娟,崔春,等.烟丝填充状态对卷烟卷制品质及包灰性能的影响[J].轻工学报,2023,38(5):68-73
   ,82. LU P,CHU W J,CUI C,et al.Effect of filling state of cut tobacco on rolling quality and ash integrity of cigarette[J].Journal of Light Industry,2023,38(5):68-73,82.

3. [3]

   刘新民,杜咏梅,程森,等.烤烟烟丝填充值与其理化指标和感官品质的关系[J].中国烟草科学,2012,33(5):74-78.
   LIU X M,DU Y M,CHENG S,et al.Relationship between filling power and major indices of physical feature and chemical components and sensory quality of cut tobacco[J].Chinese Tobacco Science,2012,33(5):74-78.

4. [4]

   李超,李陈巧,郭国宁,等.卷烟动态吸阻及稳定性影响因素分析[J].烟草科技,2023,56(11):87-93.
   LI C,LI C Q,GUO G N,et al.Factors affecting cigarette dynamic draw resistance and its stability[J].Tobacco Science & Technology,2023,56(11):87-93.

5. [5]

   刘欢,王乐,胡少东,等.卷烟燃烧动态吸阻研究[J].食品与机械,2017,33(5):83-86.
   LIU H,WANG L,HU S D,et al.Study on dynamic suction resistance of cigarette during combustion[J].Food & Machinery,2017,33(5):83-86.

6. [6]

   王乐,邓国栋,吴钊,等.基于线性网络模型的卷烟逐口动态吸阻与动态通风率的关系[J].烟草科技,2022,55(5):66-72.
   WANG L,DENG G D,WU Z,et al.Relationship between puff-by-puff dynamic draw resistance and ventilation of cigarette based on linear network model[J].Tobacco Science & Technology,2022,55(5):66-72.

7. [7]

   曾劲松,杜亮,唐大荣.不同烟丝透气度和吸压下卷烟烟气流动的数值模拟[J].造纸科学与技术,2017,36(4):44-49
   ,53. ZENG J S,DU L,TANG D R.Numerical simulation of smoke flow in different cut tobacco breathability and suction pressure[J].Paper Science & Technology,2017,36(4):44-49,53.

8. [8]

   刘赐德,陈康,梁佳欣,等.切丝宽度对烟丝关键物理特性影响的研究[J].农产品加工,2025(8):21-27. LIU C D,CHEN K,LIANG J X,et al.Study on the influence of cutting width on key physical properties of tobacco cuttings[J].Agricultural Products Processing,2025
   (8):21-27.

9. [9]

   王佳,唐国庆,冷晓飞.HDT气流烘丝机关键加工参数对卷烟感官质量、物理指标的影响[J].中国设备工程,2023(5):88-90. WANG J,TANG G Q,LENG X F.The influence of key processing parameters of HDT air flow drying machine on the sensory quality and physical indicators of cigarettes[J].China Plant Engineering,2023
   (5):88-90.

10. [10]

    殷晓娟,殷晓露,黄智,等.基于雷达图法的卷烟机劈刀盘健康状况评估[J].中国新技术新产品,2024(8):68-71. YIN X J,YIN X L,HUANG Z,et al.Evaluation of the health status of cigarette cutter blades based on radar chart method [J].New Technology & New Products of China,2024
    (8):68-71.

11. [11]

    赵鑫,刘朝贤,朱文魁,等.基于微焦点CT的烟支内部孔隙率检测[J].烟草科技,2024,57(5):75-82.
    ZHAO X,LIU C X,ZHU W K,et al.Detection of tobacco rod porosity inside a cigarette using microfocus computerized tomography[J].Tobacco Science & Technology,2024,57(5):75-82.

12. [12]

13. [13]

    游敏,付金存,王远,等.烟丝形态特性与细支卷烟填充密度均匀性关系研究[J].轻工学报,2025,40(1):75-81.
    YOU M,FU J C,WANG Y,et al.Study on the relationships between morphological characteristics of cut tobacco and the uniformity of the filling density of slim cigarettes[J].Journal of Light Industry,2025,40(1):75-81.

14. [14]

    叶鸿宇,许峰,张建中,等.成丝工艺参数对梗丝结构和卷烟吸阻稳定性的影响[J].烟草科技,2013,46(11):11-14.
    YE H Y,XU F,ZHANG J Z,et al.Influence of processing parameters on cut stem structure and draw resistance stability of cigarettes[J].Tobacco Science & Technology,2013,46(11):11-14.

15. [15]

    杨松潭,银芳,韩启立,等.卷烟燃烧过程中各项动态指标的检测分析现状与展望[J].科技创新与应用,2024,14(27):154-157.
    YANG S T,YIN F,HAN Q L,et al.Current situation and prospect of detection and analysis of various dynamic indicators during cigarette combustion [J].Technology Innovation and Application,2024,14(27):154-157.

16. [16]

    申晓锋,李华杰,李善莲,等.烟丝结构表征方法研究[J].中国烟草学报,2010,16(2):20-25.
    SHEN X F,LI H J,LI S L,et al.Study on characterization of cut tobacco particle size distribution[J].Acta Tabacaria Sinica,2010,16(2):20-25.

17. [17]

    贺莹,赵中秋,梅振然,等.基于CRITIC客观赋权法的三江源国家公园生态敏感性评价[J].环境科学,2025,46(8):5156-5168.
    HE Y,ZHAO Z Q,MEI Z R,et al.Ecological sensitivity evaluation of Three-River-Source National Park based on CRITIC objective weighting method[J].Environmental Science,2025,46(8):5156-5168.

18. [18]

    李慕颜,叶茵,陈杰,等.模糊评价方法在云产卷烟感官评价中的应用研究[J].新型工业化,2020,10(5):117-120.
    LI M Y,YE Y,CHEN J,et al.Study on application of fuzzy evaluation method in sensory evaluation of cloud-produced cigarettes[J].The Journal of New Industrialization,2020,10(5):117-120.

19. [19]

    龙林健,陈星明,刘传举,等.基于Critic赋权法的隔离矿柱安全厚度优选研究[J].化工矿物与加工,2021,50(3):1-5.
    LONG L J,CHEN X M,LIU C J,et al.Research on optimization of safety thickness of isolation pillar based on Critic weighting method[J].Industrial Minerals & Processing,2021,50(3):1-5.

20. [20]

    郭霄汉,唐朝华,陈壮宇,等.基于层次分析法的打叶复烤生产过程质量评估[J].中国设备工程,2022(20):129-131. GUO X H,TANG C H,CHEN Z Y,et al.Quality evaluation of threshing and redrying production process based on analytic hierarchy process[J].China Plant Engineering,2022
    (20):129-131.

21. [21]

    吴春雷,刚旭,黄卓娅.基于层次分析的评价权值计算模型研究与应用[J].微型电脑应用,2012,28(4):28-31.
    WU C L,GANG X,HUANG Z Y.Study and application of evaluation weitht calculation model based on analytic hierarchy process[J].Microcomputer Applications,2012,28(4):28-31.

22. [22]

    张娇,蒋倩倩,张伯言,等.基于AHP-CRITIC法正交优选乌甘袋泡茶提取工艺及抗炎作用研究[J].中草药,2020,51(8):2177-2184.
    ZHANG J,JIANG Q Q,ZHANG B Y,et al.Study on extraction process and anti-inflammatory effect of Wugan tea based on AHP-CRITIC analysis[J].Chinese Traditional and Herbal Drugs,2020,51(8):2177-2184.

23. [23]

    吕富强.基于动态加权组合模型的地表点云孔洞修补应用研究[D].桂林:桂林理工大 学,2023. LU F Q.Application research of surface point cloud hole repair based on dynamic weighted combination model[D].Guilin:Guilin University of Technology,2023.
    

24. [24]

    柴武君,郑闪闪,游金清,等.烟丝结构对中支卷烟的燃烧特性及烟气香味成分的影响[J].轻工学报,2025,40(3):104-114.
    CHAI W J,ZHENG S S,YOU J Q,et al.Effects of cut tobacco structure on combustion characteristics and smoke aroma components of medium-sized cigarettes[J].Journal of Light Industry,2025,40(3):104-114.

Proportional views