FAN Rui-feng and HAN Tao. The calculation method of the bending length of sheet metal parts[J]. Journal of Light Industry, 2013, 28(1): 83-85. doi: 10.3969/j.issn.2095-476X.2013.01.020
Citation:
FAN Rui-feng and HAN Tao. The calculation method of the bending length of sheet metal parts[J]. Journal of Light Industry, 2013, 28(1): 83-85.
doi:
10.3969/j.issn.2095-476X.2013.01.020
The calculation method of the bending length of sheet metal parts
-
Received Date:
2012-06-20
-
Abstract
Aiming at the problem of low efficiency,large error and high cost in bending of sheet metal parts production,through parameter setting with K factor,at the same time listing the bending coefficient table of bending compensation and bending duduction,the high consistency between production and design can be realized by 3D software.
-
-
References
-
[1]
胡志炜.Pro/Engineer钣金展开的原理和Y因子的确定[J].机械研究与应用,2010(5):98.
-
[2]
廖敏,殷国富,罗中先,等.实用钣金展开CAD系统的开发技术与应用研究[J].组合机床与自动化加工技术,2004(1):37.
-
[3]
舒勇东,唐超,谭俊峰.钣金折弯件快速展开工艺分析[J].金属加工:热加工,2009(5):45.
-
[4]
张永军.钣金加工中折弯系数的探讨[J].铁道技术监督,1999(7):35.
-
[5]
葛辉,秦显柱.SolidWorks钣金折弯在生产中的应用[J].大众科技,2009(10):126.
-
[6]
刘宪法.基于Pro/E的钣金展开法的应用实践[J].制造技术与机床,2004(1):58.
-
[7]
商洪清.钣金折弯工艺分析[J].金属加工:热加工,2010(1):46.
-
[8]
荆志峰,刘睿.钣金展开方法分析及应用[J].纺织机械,2010(1):43.
-
Proportional views
-
-