The effect of tube row number on heat transfer characteristics of the dimpled fin tube heat exchanger

Abstract

Keywords:
• dimpled fin tube heat exchanger,
• tube row number,
• enhanced heat transfer

References

1. [1]

   Ligrani P,Mahmood G,Harrison J,et al.Flow structure and local nusselt number variations in a channel with dimples and protrusions on opposite walls[J].International Journal of Heat and Mass Transfer,2001,44(23):4413.

2. [2]

   Won S Y,Zhang Q,Ligrani P M.Comparisons of flow structure above dimpled surfaces with different dimple depths in a channel[J].Physics of fluids,2005,17:45.

3. [3]

   Chang S,Chiang K,Yang T,et al.Heat transfer and pressure drop in dimpled fin channels[J].Experimental Thermal and Fluid Science,2008,33(1):23.

4. [4]

   Hwang S D,Kwon H G,Cho H H.Heat transfer with dimple/protrusion arrays in a rectangular duct with a low reynolds number range[J].International Journal of Heat and Fluid Flow,2008,29(4):916.

5. [5]

   Hwang S D,Kwon H G,Cho H H.Local heat transfer and thermal performance on periodically dimple-protrusion patterned walls for compact heat exchangers[J].Energy,2010,35(12):5357.

6. [6]

   Isaev S,Kornev N,Leontiev A,et al.Influence of the reynolds number and the spherical dimple depth on turbulent heat transfer and hydraulic loss in a narrow channel[J].International Journal of Heat and Mass Transfer,2010,53(1):178.

7. [7]

   Chang S,Liou T M,Lee T H.Thermal performance comparison between radially rotating ribbed parallelogram channels with and without dimples[J].International Journal of Heat and Mass Transfer,2012,55(13):3541.

8. [8]

   Mahmood G,Ligrani P.Heat transfer in a dimpled channel:combined influences of aspect ratio,temperature ratio,reynolds number,and flow structure[J].International Journal of Heat and Mass Transfer,2002,45(10):2011.

9. [9]

   樊菊芳,何雅铃,陶文铨.球突翅片表面的数值模拟和特性分析[J].工程热物理学报,2008,29(11):1921.
   

10. [10]

    Fan Q,Yin X.3-D numerical study on the effect of geometrical parameters on thermal behavior of dimple jacket in thin-film evaporator[J].Applied Thermal Engineering,2008,28(14):1875.

11. [11]

    Elyyan M A,Tafti D K.A novel split-dimple interrupted fin configuration for heat transfer augmentation[J].International Journal of Heat and Mass Transfer,2009,52(5):1561.

12. [12]

    宋伟明,孟继安,李志信.空冷器球突翅片换热与不可逆性分析[J].清华大学学报:自然科学版,2010(7):1104.
    

13. [13]

    吴学红,崔帅,苟秋平,等.球突翅片的传热流动特性及等效热阻数值分析[J].工业加热,2012,41(1):43.
    

14. [14]

15. [15]

    吴学红,苟秋平,吕彦力,等.半球突开缝翅片传热特性模拟及(火积)分析[J].工程热物理学报,2013,34(1):153.
    

16. [16]

    苟秋平,吴学红,吕彦力,等.复合翅片传热与流动特性的数值模拟[J].热科学与技术,2011,10(4):317.
    

Proportional views