Analysis of structure error for cable net antenna based on the finite element

Abstract

Keywords:
• cable net antenna,
• structure error,
• manufacturing error,
• surface accuracy,
• finite element

References

1. [1]

   THOMAS M W. Historical perspectives on the development of deployable reflectors[C]//The 50th AIAA/ASME/ASCE/AHS Structures,Structure Dynamics and Materials Conference. Reston VA:AIAA,2009:2605.

2. [2]

   李团结,张琰,段宝岩.周边桁架可展开天线展开过程运动分析及控制[J].西安电子科技大学学报(自然科学版),2007,34(6):916.
   

3. [3]

   杨东武,仇原鹰,段宝岩.索网式天线结构预拉力优化的新方法[J].西安电子科技大学学报(自然科学版),2008,35(2):319.
   

4. [4]

   ORIKASA T, MIURA A, HIROYUKI T,et al. A study of large reflector antenna mounted on communication satellite for satellite terrestrial mobile communication system[C]//31st AIAA International Communications Satellite Systems Conference. Reston VA:AIAA,2013:5649.

5. [5]

   SHI H,YANG B.FANG H.Offset-feed surface mesh generation for design of space deployable mesh reflectors[C]//14th AIAA Gossamer Spacecraft Forum. Reston VA:AIAA,2013:1526.

6. [6]

   李团结,周懋花,段宝岩.可展天线的柔性索网结构找形分析方法[J].宇航学报,2008,29(3):794.
   

7. [7]

   LOPATIN A V, RUTKOVSKAYA M A, GANTOVNIK V B.Accuracy analysis of the reflective surface of the umbrella-type antenna[J].Journal of Spacecraft and Rockets,2008,45(1):149.

8. [8]

   HEDGEPETH J M.Influence of fabrication on the surface accuracy of large antenna structures[J].AIAA Journal,1982,20(5):680.

9. [9]

   MEHEM M.Methods of analyzing surface accuracy of large antenna structures due to manufacturing tolerance[C]//Proceeding of 44th AIAA/ASMW/ASCE/AHS/ASC Structures,Structure Dynamics and Materials Conference.Norfolk:AIAA,2003.

10. [10]

    MEGURO A,HARADA S,WATANABE M.Key technologies for high-accuracy large mesh antenna reflectors[J].Acta Astronautica,2003,53:899.

11. [11]

    TANAKA H.Surface error estimation and correction of a space antenna based on antenna gain analyses[J].Acta Astronautica,2011,68:1062.

12. [12]

    范叶森,马小飞,李正军,等.绳索长度误差对索网天线网面精度影响的分析方法[J].华南理工大学学报(自然科学版),2014,42(8):64.
    

13. [13]

    MORTEROLLE S,MAURIN B,QUIRANT J,et al.Numerical form-finding of geotensoid tension truss for mesh reflector[J]. Acta Astronautica,2012,76:154.

14. [14]

    TIBERT G.Deployable tensegrity structures for space applications[R].Stockholm:Royal Institute of Technology,2002:147-150.

15. [15]

    王洪纲.热弹性力学概论[M].北京:清华大学出版社,1989.
    

16. [16]

    李同起,王成扬.影响芳纶纤维及其复合材料性能的因素和改善方法[J].高分子材料科学与工程,2003,19(5):5.
    

Proportional views