基于烟芯段和滤嘴段耦合的加热卷烟烟气关键成分释放模型构建
Modeling the release of key components of heated cigarette smoke based on the coupling of tobacco section and filter section
-
摘要: 为揭示加热卷烟抽吸过程中的传质机理,通过构建加热卷烟烟气关键成分的烟芯段释放动力学模型和滤嘴段逐口截留模型,建立了加热卷烟中丙二醇、丙三醇和烟碱的传质模型,并采用 COMSOL Multiphysics软件对模型进行数值求解,对烟支逐口抽吸过程中烟芯段和滤嘴段丙二醇、丙三醇、烟碱的含量及浓度场进行模拟。 结果表明:模拟得到的加热卷烟逐口抽吸过程中烟芯段丙二醇、丙三醇、烟碱剩余量与实验值较为吻合,建立的动力学模型可较好地反映加热卷烟 3 种关键成分的释放机理;烟气丙二醇、丙三醇、烟碱出口释放量与实验值较为吻合,建立的截留模型可较好地反映逐口抽吸过程中滤嘴段对烟气 3 种关键成分的截留机理;抽吸时烟芯段外壁较加热片附近固相物质传质效率低;随着抽吸口数的增加,烟气中丙二醇、丙三醇、烟碱的质量浓度在烟芯和滤嘴段呈动态变化,其中滤嘴段的质量浓度先升后降,烟芯段的质量浓度则从第 2口开始减少;单口抽吸过程中,烟芯段和滤嘴段烟气丙二醇、丙三醇、烟碱的质量浓度随着气流速度的变化而发生动态变化。Abstract: To reveal the mass transfer mechanisms of heated cigarettes during puffing, we constructed dynamic models for the release kinetics of the cigarette core segment and mouthpiece retention segment, establishing a mass transfer model for key components of heated cigarettes. Using COMSOL Multiphysics software, we numerically solved the model to simulate the content and concentration fields of core and mouthpiece segments during each puffingcycle. Results indicated that the simulated residual amount of core segment key components during puffing closely matched experimental values, validating the dynamic model′s ability to reflect the release mechanisms of heated cigarette components. The simulated outlet release of gas phase components closely matched experimental values, validating the retention model′s ability to reflect the mouthpiece′s retention mechanism of gas phase componentsduring each puff. During puffing, the transfer efficiency of solid-phase materials near the heating element on the core segment′s outer wall was low. With increasing puffs, the concentrations of the three key components in the gas phase varied dynamically in the core and mouthpiece segments, with concentrations in the mouthpiece segment initially rising and then declining, while those in the core segment decreased from the second puff onwards. During single puffing, the concentrations of gas phase key components in the core and mouthpiece segments dynamically changed with variations in airflow velocity.
-
Key words:
- heated cigarette /
- key component /
- mass transfer model /
- retention model /
- numerical simulation
-
-
[1]
孙学辉,赵乐,王宜鹏,等. 无烟气烟草制品的发展现状和趋势[J]. 烟草科技,2015,48(11):83-90.
-
[2]
蒋举兴,者为,詹建波,等. 电子烟的发展现状及其危害性[J]. 安徽农业科学,2013,41(16):7322,7353.
-
[3]
刘亚丽,郑路,洪群业,等. 加热型无烟气烟草制品专利技术统计分析[J]. 烟草科技,2013,46(7):16-19
,42. -
[4]
艾思. 非传统烟草制品初探[J]. 中国烟草,2013(5):59.
-
[5]
BOMBICK D W,AYRES P H,PUTNAM K,et al. Chemicaland biological studies of a new cigarette that primarily heats tobacco. Part 3. In vitro toxicity of whole smoke[J].Food and Chemical Toxicology,1998,36(3):191-197.
-
[6]
PRYOR W A,CHURCH D F,EVANS M D,et al. A comparison of the free radical chemistry of tobacco-burning cigarettes and cigarettes that only heat tobacco[J]. Free Radical Biology & Medicine,1990,8(3):275-279.
-
[7]
BORGERDING M F,BODNAR J A,CHUNG H L,et al.Chemical and biological studies of a new cigarette that primarily heats tobacco. Part 1. Chemical composition of mainstream smoke [J]. Food and Chemical Toxicology,1998,36(3):169-182.
-
[8]
吴键,陈震,黄峰,等. 加热卷烟叶丝等温热失重及关键成分释放特性分析[J]. 轻工学报,2023,38(3):87-93
,111. -
[9]
孙志伟,王威,杜文,等. 电加热型烟草制品加热体的电热模拟[J]. 烟草科技,2020,53(9):85-93.
-
[10]
魏信建,邹金慧,郑绪东,等. 电磁式卷烟加热器磁热耦合数值模拟研究[J]. 陕西理工大学学报(自然科学版),2020, 36(6): 42-48.
-
[11]
孙剑韬,陈义坤,刘磊,等. 加热不燃烧型雾化系统传热仿真分析[J]. 武汉大学学报(工学版),2021,54(7):668-674.
-
[12]
张洪非,姜兴益,庞永强,等. 两种抽吸模式下加热不燃烧卷烟主流烟气释放物分析[J]. 烟草科技,2018,51(9):40-48.
-
[13]
龚淑果,刘巍,黄平,等. 加热不燃烧卷烟烟气主要成分的逐口释放行为[J]. 烟草科技,2019,52(2):62-71.
-
[14]
张丽,王维维,张小涛,等. 加热不燃烧卷烟气溶胶中主要成分的转移行为[J]. 烟草科技,2019,52(3):46-55.
-
[15]
冯露露,付丽丽,王乐,等. 阵列式多通道逐口吸烟机的设计[J]. 烟草科技,2023,56(6):101-107.
-
[16]
王乐,王亚林,李志强,等. 电加热卷烟烟芯段温度分布和烟气关键成分逐口变化:第1 部分实验[J]. 烟草科技,2021,54(3):31-39.
-
[17]
王乐,王亚林,李志强,等. 电加热卷烟烟芯段温度分布和烟气关键成分逐口变化:第2 部分模拟[J]. 烟草科技,2021,54(6):58-64.
-
[18]
王乐,冯露露,张柯,等. 加热卷烟逐口抽吸过程传热数值模型[J]. 烟草科技,2022,55(6):80-88.
-
[19]
高峄涵,黄洁洁,王雨青,等. 电加热卷烟传热与原料组分变化的数值模拟[J]. 烟草科技,2023,56(12):67-75.
-
[20]
韩敬美,张明建,尚善斋,等. 不同滤嘴结构的电加热烟草产品烟气主要成分逐口释放规律研究[J]. 中国烟草学报,2021,27(1):1-7.
-
[21]
王乐,韩敬美,张明建,等. 电加热卷烟烟气关键成分在滤嘴中的截留规律[J]. 烟草科技,2020,53(11):69-75.
-
[22]
张莹莹,秦云华,杨柳,等. 滤棒特性对外周两段式加热型细支加热卷烟逐口理化指标的影响[J]. 烟草科技, 2023,56(12):28-39.
-
[1]
-
点击查看大图
计量
- PDF下载量: 9
- 文章访问数: 815
- 引证文献数: 0
下载:
