喷胶式接装机滤嘴通风面积稳定性影响因素分析

马晓伟; 冯欣; 曲国福; 胡建洪; 王贝; 张晶; 王建民

doi:10.12187/2021.01.005

CN 41-1437/TS ISSN 2096-1553

马晓伟 , 冯欣 , 曲国福 , 胡建洪 , 王贝 , 张晶 , 王建民

马晓伟, 冯欣, 曲国福, 等. 喷胶式接装机滤嘴通风面积稳定性影响因素分析[J]. 轻工学报, 2021, 36(1): 39-44. doi: 10.12187/2021.01.005

引用本文: 马晓伟, 冯欣, 曲国福, 等. 喷胶式接装机滤嘴通风面积稳定性影响因素分析[J]. 轻工学报, 2021, 36(1): 39-44. doi: 10.12187/2021.01.005

MA Xiaowei, FENG Xin, QU Guofu, et al. Analysis of factors affecting the stability of the filter ventilation area of spraying glue-splicing machine[J]. Journal of Light Industry, 2021, 36(1): 39-44. doi: 10.12187/2021.01.005

Citation: MA Xiaowei, FENG Xin, QU Guofu, et al. Analysis of factors affecting the stability of the filter ventilation area of spraying glue-splicing machine[J]. Journal of Light Industry, 2021, 36(1): 39-44. doi: 10.12187/2021.01.005

喷胶式接装机滤嘴通风面积稳定性影响因素分析

1. 红塔烟草(集团)有限责任公司工艺质量部, 云南玉溪 653100;
2. 郑州轻工业大学食品与生物工程学院, 河南郑州 450001

作者简介: 马晓伟(1972-),男,云南省玉溪市人,红塔烟草(集团)有限责任公司高级工程师,主要研究方向为工艺质量管理.;

基金项目: 红塔烟草（集团）有限责任公司科技项目（2018JC01）
中图分类号: TS43

Analysis of factors affecting the stability of the filter ventilation area of spraying glue-splicing machine

1. Craft Quality Department, Hongta Tobacco Group Co., Ltd., Yuxi 653100, China;
2. College of Food and Bioengineering, Zhengzhou University of Light Industry, Zhengzhou 450001, China
Received Date: 2020-04-20

CLC number: TS43

摘要: 为提高喷胶式接装机滤嘴通风率稳定性控制水平，以喷胶压力、搓接温度为变量，采用方差分析、回归分析等方法对通风区域（无胶区）面积稳定性的影响因素进行研究.结果表明：喷胶压力会影响接装胶施胶量，进而影响滤嘴通风区域总面积和滤嘴通风率，其最佳控制范围为1000~1200 hPa；搓接温度会影响滤棒搭口胶熔化、扩散程度，进而影响无胶区有效通风面积和滤嘴通风率；无胶区有效面积在相同机型不同机台间存在差异性，是导致机台间滤嘴通风率波动的重要因素之一，控制机台间喷胶压力与搓接温度的一致性有利于保证有效通风面积和滤嘴通风率的稳定性.
- 滤嘴通风率 /
- 通风区域面积 /
- 喷胶压力 /
- 搓接温度
Abstract: In order to improve the stability control level of the filter ventilation rate of the spraying glue-splicing machine,the factors affecting the stability of the ventilation area (no-glue area) were studied by using variance analysis,regression analysis and other methods,with the spraying glue pressure and the splicing temperature as variables.The results showed that the spraying glue pressure would affect the amount of tipping glue and the total area of ventilation area and ventilation rate,the best control range was 1000~1200 hPa.The splicing temperature would affect the degree of melting and diffusion of the filter rod glue and further the effective ventilation area (no-glue area) and ventilation rate.There existed differences between the effective ventilation area(no-glue area) and different machine of the same model,which was one of the most important factors causing the fluctuation of filter ventilation rate between machines.The consistency of the spraying glue pressure and the splicing temperature between the machines would be beneficial for the ensurance of the effective ventilation area and the stability of the filter ventilation rate.
- filter ventilation rate /
- ventilation area /
- spraying glue pressure /
- splicing temperature
1. [1]
  邵名伟,严志景,谢映松,等.预打孔卷烟接装纸施胶效果及胶辊设计参数对通风率的影响[J].烟草科技,2018,51(5):81.
2. [2]
  刘勇,吴传绪,吴泉兰,等.水松纸控胶辊参数对包接质量与通风率的影响[J].设备管理与维修,2019(3):102.
3. [3]
  栗勇伟,乔建军,马少军,等.卷接机组烟支搓接质量的研究及改进[J].烟草科技,2012(10):24.
4. [4]
  刘澜波,刘三星,李华明,等.ZJ17卷接机组接装纸胶位在线微调装置设计[J].烟草科技,2019,52(3):102.
5. [5]
  余文炎.YJ27型接装机工艺设备调整对烟支嘴头通风率的影响[J].轻工标准与质量,2013(3):49.
6. [6]
  姚二民,郭乃伟,张超帅,等.接装纸涂胶量对卷烟滤嘴通风率的影响[J].湖北农业科学,2016,55(19):5160.
7. [7]
  黄晓飞,姚二民,韦峰,等.打孔卷烟烟支通风率研究[J].企业技术开发,2013,32(13):43.
8. [8]
  陈岱峰,费婷.水松纸表面特性及接装胶渗透性能研究用于卷烟生产制造质量控制[C]//中国烟草学会.中国烟草2013年学术年会论文集.武汉:中国烟草学会,2013:11.
9. [9]
  张晶,马晓伟,冯欣,等.接装胶及接装纸种类对胶水渗透性的影响[J].食品与机械,2018,34(6):98.
10. [10]
  陈德辉.低焦油滤嘴烟支总通风率稳定性的研究与应用[J].机械工程师,2015(11):256.
11. [11]
  马晓伟,冯欣,曲国福,等.接装纸/胶搭配对滤嘴通风率的影响[J].云南化工,2019,46(10):94.
12. [12]
  国际烟草专卖局.卷烟通风率检测设备通用技术条件:YC/T 546-2016[S].北京:中国标准出版社,2016.
13. [13]
  余建英,何旭宏.数据统计分析与spass应用[M].北京:人民邮电出版社,2003:173-176.

点击查看大图

计量

PDF下载量: 19
文章访问数: 1549
引证文献数: 0

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

马晓伟, 冯欣, 曲国福, 等. 喷胶式接装机滤嘴通风面积稳定性影响因素分析[J]. 轻工学报, 2021, 36(1): 39-44. doi: 10.12187/2021.01.005

引用本文: 马晓伟, 冯欣, 曲国福, 等. 喷胶式接装机滤嘴通风面积稳定性影响因素分析[J]. 轻工学报, 2021, 36(1): 39-44. doi: 10.12187/2021.01.005

喷胶式接装机滤嘴通风面积稳定性影响因素分析

作者简介:马晓伟(1972-),男,云南省玉溪市人,红塔烟草(集团)有限责任公司高级工程师,主要研究方向为工艺质量管理.

1. 红塔烟草(集团)有限责任公司工艺质量部, 云南玉溪 653100;
2. 郑州轻工业大学食品与生物工程学院, 河南郑州 450001

收稿日期: 2020-04-20

基金项目: 红塔烟草（集团）有限责任公司科技项目（2018JC01）

关键词:

摘要: 为提高喷胶式接装机滤嘴通风率稳定性控制水平，以喷胶压力、搓接温度为变量，采用方差分析、回归分析等方法对通风区域（无胶区）面积稳定性的影响因素进行研究.结果表明：喷胶压力会影响接装胶施胶量，进而影响滤嘴通风区域总面积和滤嘴通风率，其最佳控制范围为1000~1200 hPa；搓接温度会影响滤棒搭口胶熔化、扩散程度，进而影响无胶区有效通风面积和滤嘴通风率；无胶区有效面积在相同机型不同机台间存在差异性，是导致机台间滤嘴通风率波动的重要因素之一，控制机台间喷胶压力与搓接温度的一致性有利于保证有效通风面积和滤嘴通风率的稳定性.

English Abstract

Analysis of factors affecting the stability of the filter ventilation area of spraying glue-splicing machine

1. Craft Quality Department, Hongta Tobacco Group Co., Ltd., Yuxi 653100, China;
2. College of Food and Bioengineering, Zhengzhou University of Light Industry, Zhengzhou 450001, China

Received Date: 2020-04-20

Abstract: In order to improve the stability control level of the filter ventilation rate of the spraying glue-splicing machine,the factors affecting the stability of the ventilation area (no-glue area) were studied by using variance analysis,regression analysis and other methods,with the spraying glue pressure and the splicing temperature as variables.The results showed that the spraying glue pressure would affect the amount of tipping glue and the total area of ventilation area and ventilation rate,the best control range was 1000~1200 hPa.The splicing temperature would affect the degree of melting and diffusion of the filter rod glue and further the effective ventilation area (no-glue area) and ventilation rate.There existed differences between the effective ventilation area(no-glue area) and different machine of the same model,which was one of the most important factors causing the fluctuation of filter ventilation rate between machines.The consistency of the spraying glue pressure and the splicing temperature between the machines would be beneficial for the ensurance of the effective ventilation area and the stability of the filter ventilation rate.

参考文献 (13)