电加热卷烟气溶胶物理特性的表征
Characterization of physical properties of aerosol from electrically heated cigarette
-
摘要: 收集市场上5个品牌的20个电加热卷烟样品,对其总释放气溶胶和逐口释放气溶胶的物理特性(粒数浓度、粒数中值粒径和体积浓度)进行表征及对比分析。结果表明:1)电加热卷烟样品总释放气溶胶的粒数浓度主要在109个/cm3的量级,体积浓度在105μm3/cm3的量级,粒径分布轮廓为单峰分布或双峰分布,粒数中值粒径主要集中在30~60 nm范围内;2)不同品牌电加热卷烟总释放和逐口释放气溶胶物理特性的均存在明显差异,同一电加热卷烟样品逐口释放气溶胶的粒数浓度、粒数中值粒径和体积浓度均呈现出一定的逐口不稳定性。Abstract: In order to study the physical properties of aerosol from electrically heated tobacco products (HTPs) and to provide the basis for the inhalation safety evaluation of aerosol from HTPs, [BP)]20 kinds of electrically heated cigarettes from 5 brands in the market were collected to characterize and compare the physical properties (number concentration, count median diameter and volume concentration) of total and puff-by-puff released aerosol. The results showed that the particle number concentration of the total aerosol released from the electrically heated cigarette was mainly in the order of 109/cm3, and the particle volume concentration was in the order of 105 μm3/cm3. The particle size distribution profiles of aerosol were unimodal or bimodal, and the count median diameter was mainly in the range of 30~60 nm. There were obvious differences in physical properties of total and puff-by-puff release of the aerosol from different brands of electrically heated cigarettes. The particle number concentration, count median diameter and volume concentration of the aerosol puff-by-puff released from the electrically heated cigarettes showed a certain degree of instability.
-
-
[1]
刘珊,崔凯,曾世通,等.加热非燃烧型烟草制品剖析[J].烟草科技,2016,49(11):56-65.
-
[2]
SMITH M R,CLARK B,LUEDICKE F,et al.Evaluation of the Tobacco Heating System 2.2. Part 1:Description of the system and the scientific assessment program [J].Regulatory Toxico-logy and Pharmacology,2016,81(S2):S17-S26.
-
[3]
HUGHES J R,KEELY J P.The effect of a novel smoking system-Accord-on ongoing smoking and toxin exposure[J].Nicotine & Tobacco Research, 2004,6(6):1021-1027.
-
[4]
李翔,谢复炜,刘惠民.新型烟草制品毒理学评价研究进展[J].烟草科技, 2016,49(1):88-93.
-
[5]
SCHALLER J P,KELLER D,POGET L,et al.Evaluation of the Tobacco Heating System 2.2. Part 2: Chemical composition, genotoxicity, cytotoxicity, and physical properties of the aerosol[J]. Regulatory Toxicology and Pharmacology,2016,81(S2):S27-S47.
-
[6]
JACCARD G,TAFIN D D,MOENNIKES O,et al.Comparative assessment of HPHC yields in the Tobacco Heating System THS2.2 and commercial cigarettes[J].Regulatory Toxicology and Pharmacology,2017,90:1-8.
-
[7]
BOUE S,GOEDERTIER D,HOENG J,et al.State-of-the-art methods and devices for the generation,exposure,and collection of aerosols from heat-not-burn tobacco products [J].Toxicology Research and Application,2020,4:1-40.
-
[8]
CARVALHO T C,PETERS J I,WILLIAMS R O.Influence of particle size on regional lung deposition: What evidence is there?[J].International Journal of Pharmaceutics.2011,406(1/2):1-10.
-
[9]
SAHU S,TIWARI M,BHANGARE R,et al.Particle size distribution of mainstream and exhaled cigarette smoke and predictive deposition in human respiratory tract[J].Aerosol and Air Quality Research,2013,13(1):324-332.
-
[10]
MANIGRASSO M,BUONANNO G,FUOCO F C,et al.Aerosol deposition doses in the human respiratory tree of electronic cigarette smokers[J].Environmental Pollution,2015,196:257-267.
-
[11]
ZHANG Z,KLEINSTREUER C,HYUN S.Size-change and deposition of conventional and composite cigarette smoke particles during inhalation in a subject-specific airway model[J].Journal of Aerosol Science,2012,46:34-52.
-
[12]
KANE D B, ASGHARIAN B, PRICE O T, et al. Effect of smoking parameters on the particle size distribution and predicted airway deposition of mainstream cigarette smoke[J].Inhalation Toxicology,2010,22(3):199-209.
-
[13]
SYMONDS P R J,REAVELL K S,OLFERT J S,et al.Diesel soot mass calculation in real-time with a differential mobility spectrometer[J].Journal of Aerosol Science,2007,38(1):52-68.
-
[14]
ALDERMAN S L,INGEBRETHSEN B J.Characterization of mainstream cigarette smoke particle size distributions from commercial cigarettes using a DMS500 fast particulate spectrometer and cycle simulator[J].Aerosol Science and Technology, 2011, 45(12):1409-1421.
-
[15]
段沅杏,赵伟,杨继,等.传统卷烟与电子烟烟气气溶胶粒径分布研究[J].中国烟草学报, 2015,21(1):1-5.
-
[16]
CUI H P,YURTERI C U,CABOT R,et al.Characterization of mainstream cigarette smoke aerosol by size-fractionated chemical analysis of nicotine, solanesol, and tobacco specific nitrosamines[J].Particulates Science and Technology,2020,38:587-595.
-
[17]
司晓喜,汤建国,朱瑞芝,等.两种抽吸模式下电加热不燃烧卷烟烟气气溶胶的粒径分布[J].烟草科技,2018,51(8):47-52.
-
[18]
MARKUS N,ARKADIUSZ K K.Modeling aerosol formation in an electrically heated tobacco product[J].International Journal of Chemical and Molecular Engineering, 2016,10(4):373-385.
-
[19]
VLADIMIR B B,MARIELLE C B,COURTNEY A G,et al.Real-time measurement of electronic cigarette aerosol size distribution and metals content analysisr[J].Nicotine & Tobacco Research, 2016,18(9):1895-1902.
-
[20]
王诗太,金勇,李克,等.醇类溶剂对电子烟雾化气溶胶粒径分布的影响[J].中国烟草科技,2017,23(6):31-35.
-
[21]
BAKER R R.Smoke generation inside a burning cigarette: Modifying combustion to develop cigarettes that may be less hazardous to health[J].Progress in Energy & Combustion Science,2006,32(4):373-385.
-
[22]
ADAM T,MCAUGHEY T,MCGRATH C,et al.Simultaneous online size and chemical analysis of gas phase and particulate phase of cigarette mainstream smoke[J].Analytical and Bioanalytical Chemistry,2009,394(4):1193-1203.
-
[23]
MARKUS N,ARKADIUSZ K K.Modeling aerosol formation in an electrically heated tobacco product[J].International Journal of Chemical and Molecular Engineering,2016,10(4):373-385.
-
[1]
计量
- PDF下载量: 37
- 文章访问数: 1993
- 引证文献数: 0