标准分评价法在烟梗可用性量化评价中的应用

楚文娟; 田海英; 李红涛; 王鹏飞; 于建春; 刘博; 程向红

doi:10.12187/2021.02.006

CN 41-1437/TS ISSN 2096-1553

楚文娟 , 田海英 , 李红涛 , 王鹏飞 , 于建春 , 刘博 , 程向红

楚文娟, 田海英, 李红涛, 等. 标准分评价法在烟梗可用性量化评价中的应用[J]. 轻工学报, 2021, 36(2): 43-48. doi: 10.12187/2021.02.006

引用本文: 楚文娟, 田海英, 李红涛, 等. 标准分评价法在烟梗可用性量化评价中的应用[J]. 轻工学报, 2021, 36(2): 43-48. doi: 10.12187/2021.02.006

CHU Wenjuan, TIAN Haiying, LI Hongtao, et al. Application of standardized score evaluation method in quantitative evaluation of tobacco stem usability[J]. Journal of Light Industry, 2021, 36(2): 43-48. doi: 10.12187/2021.02.006

Citation: CHU Wenjuan, TIAN Haiying, LI Hongtao, et al. Application of standardized score evaluation method in quantitative evaluation of tobacco stem usability[J]. Journal of Light Industry, 2021, 36(2): 43-48. doi: 10.12187/2021.02.006

标准分评价法在烟梗可用性量化评价中的应用

河南中烟工业有限责任公司技术中心, 河南郑州 450000

作者简介: 楚文娟(1983-),女,河南省平顶山市人,河南中烟工业有限责任公司工程师,主要研究方向为烟草化学与卷烟材料.;

基金项目: 河南中烟工业有限责任公司重点项目（ZW2014051）
中图分类号: TS452.1

Application of standardized score evaluation method in quantitative evaluation of tobacco stem usability

Technology Center, China Tobacco He'nan Industrial Co., Ltd., Zhengzhou 450000, China
Received Date: 2020-07-25

CLC number: TS452.1

摘要: 为实现烟梗配方的数字化设计，以国内6个主要产地（楚雄、南平、郴州、重庆、毕节和平顶山）烤烟的上部烟梗、中部烟梗和下部烟梗共18个样本为研究对象，针对烟梗光泽、填充值、感官品质、单克梗丝的焦油释放量和烟气综合危害性指数5个指标，结合不同档次卷烟对烟梗原料的需求，采用标准分评价法构建烟梗原料可用性量化评价方法.结果表明，将采用标准分评价法优选的烟梗原料制成梗丝，其相关指标与梗丝配方设计目标一致，说明该方法客观、简便，可作为烟梗可用性综合评价的定量方法.
- 标准分评价法 /
- 烟梗 /
- 可用性 /
- 量化评价
Abstract: In order to realize the digital design of tobacco stem formula,18 samples of upper,middle and lower tobacco stems from 6 main producing areas (Chuxiong,Nanping,Chenzhou,Chongqing,Bijie and Pingdingshan) in China were selected as the research objects. Based on the standardized score comprehensive evaluatition,a quantitative evaluation method for usability of tobacco stem raw materials was established from five factors including luster of tobacco stem,filling value,sensory quality,tar release per gram of tobacco stem and comprehensive hazard index of smoke,combined with the demand of different grades of cigarettes for tobacco stem raw materials. The results showed that the tobacco stem raw materials optimized by the standard score evaluation method were made into stem shreds,and the relevant indicators were consistent with the design goals of the stem shred formula,indicating that the method was objective and simple,and it could be used as a quantitative method for comprehensive evaluation of tobacco stem usability.
- standardized score evaluation method /
- tobacco stem /
- usability /
- quantitative evaluation
1. [1]
  唐远驹.关于烟叶的可用性问题[J].中国烟草科学,2007,28(1):1.
2. [2]
  朱尊权.烟叶的可用性与卷烟的安全性[J].烟草科技,2000(8):3.
3. [3]
  程向红,韦凤杰,董顺德,等.不同部位、产地烤烟梗丝主流烟气有害成分释放量分析[J].河南农业大学学报,2015(5):590.
4. [4]
  宋丽丽,魏涛,杨旭,等.烟梗结构特征及其热解特性研究[J].轻工学报,2020,35(6):27.
5. [5]
  马京民,刘国顺,时向东,等.主成分分析和聚类分析在烟叶质量评价中的应用[J].烟草科技,2009(7):57.
6. [6]
  胡钟胜,陈晶波,周兴华,等.模糊评判与欧氏距离法在烟叶化学成分评价中的应用[J].烟草科技,2012(11):33.
7. [7]
  徐文姗,谭馨,鲁黎明.基于物元可拓模型的烤烟化学成分协调性研究[J].河南农业大学学报,2014,48(5):561.
8. [8]
  马慧婷,赵铭钦,于海顺,等.基于模糊综合评判烟叶原料使用类群的初步划分[J].中国烟草科学,2015,36(2):1.
9. [9]
  于建军.卷烟工艺学[M].北京:中国农业出版社,2003:246-247.
10. [10]
  王月侠,葛善礼,贾涛,等.烟梗化学组成的分析[J].烟草科技,1996(3):16.
11. [11]
  杨烨.标准分数在ESSE中的应用[J].南京财经大学学报,2009(3):81.
12. [12]
  黄光扬.高考标准分数制度及其应用[J].中国考试,1996(5):10.
13. [13]
  国家烟草专卖局.卷烟第4部分感官技术要求:GB 5606.4-2005[S]. 北京:中国标准出版社,2005.
14. [14]
  国家烟草专卖局.卷烟膨胀梗丝填充值的测定:YC/T 163-2003[S].北京:中国标准出版社,2003.
15. [15]
  国家烟草专卖局.烟草及烟草制品感官评价方法:YC/T 138-1998[S].北京:中国标准出版社,1998.
16. [16]
  国家烟草专卖局.卷烟用常规分析用吸烟机测定总粒相物和焦油:GB/T 19609-2004[S].北京:中国标准出版社,2004.
17. [17]
  谢剑平,刘惠民,朱茂祥,等.卷烟烟气危害性指数研究[J].烟草科技,2009(2):5.
1. [1]
  刘广超 , 邓莎 , 高峄涵 , 吴涛 , 邓锐杰 . 加热卷烟辊压法薄片丝吸湿性影响因素研究. 轻工学报, 2024, 39(5): 109-117. doi: 10.12187/2024.05.013
2. [2]
  卢晓波 , 徐海 , 朱俊召 , 张宇 , 谭健 , 高冠男 , 胡军华 , 林龙 . 基于机器视觉的加热卷烟烟支端部质量检测系统设计. 轻工学报, 2024, 0(0): -.
3. [3]
  吴晓东 , 刘畅 , 李俊 , 胡良志 , 贺凌晨 , 袁海霞 , 李强 , 黄锦标 . 基于高光谱检测的烟丝加香均匀性表征方法. 轻工学报, 2024, 39(5): 95-101. doi: 10.12187/2024.05.011
4. [4]
  李艳坤 , 张伟 , 刘彦伶 . 数据融合策略在食用油真实性鉴别中的研究与应用进展. 轻工学报, 2024, 39(5): 50-59. doi: 10.12187/2024.05.006

点击查看大图

计量

PDF下载量: 12
文章访问数: 1082
引证文献数: 0

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

楚文娟, 田海英, 李红涛, 等. 标准分评价法在烟梗可用性量化评价中的应用[J]. 轻工学报, 2021, 36(2): 43-48. doi: 10.12187/2021.02.006

引用本文: 楚文娟, 田海英, 李红涛, 等. 标准分评价法在烟梗可用性量化评价中的应用[J]. 轻工学报, 2021, 36(2): 43-48. doi: 10.12187/2021.02.006

标准分评价法在烟梗可用性量化评价中的应用

作者简介:楚文娟(1983-),女,河南省平顶山市人,河南中烟工业有限责任公司工程师,主要研究方向为烟草化学与卷烟材料.

河南中烟工业有限责任公司技术中心, 河南郑州 450000

收稿日期: 2020-07-25

基金项目: 河南中烟工业有限责任公司重点项目（ZW2014051）

关键词:

摘要: 为实现烟梗配方的数字化设计，以国内6个主要产地（楚雄、南平、郴州、重庆、毕节和平顶山）烤烟的上部烟梗、中部烟梗和下部烟梗共18个样本为研究对象，针对烟梗光泽、填充值、感官品质、单克梗丝的焦油释放量和烟气综合危害性指数5个指标，结合不同档次卷烟对烟梗原料的需求，采用标准分评价法构建烟梗原料可用性量化评价方法.结果表明，将采用标准分评价法优选的烟梗原料制成梗丝，其相关指标与梗丝配方设计目标一致，说明该方法客观、简便，可作为烟梗可用性综合评价的定量方法.

English Abstract

Application of standardized score evaluation method in quantitative evaluation of tobacco stem usability

Technology Center, China Tobacco He'nan Industrial Co., Ltd., Zhengzhou 450000, China

Received Date: 2020-07-25

Abstract: In order to realize the digital design of tobacco stem formula,18 samples of upper,middle and lower tobacco stems from 6 main producing areas (Chuxiong,Nanping,Chenzhou,Chongqing,Bijie and Pingdingshan) in China were selected as the research objects. Based on the standardized score comprehensive evaluatition,a quantitative evaluation method for usability of tobacco stem raw materials was established from five factors including luster of tobacco stem,filling value,sensory quality,tar release per gram of tobacco stem and comprehensive hazard index of smoke,combined with the demand of different grades of cigarettes for tobacco stem raw materials. The results showed that the tobacco stem raw materials optimized by the standard score evaluation method were made into stem shreds,and the relevant indicators were consistent with the design goals of the stem shred formula,indicating that the method was objective and simple,and it could be used as a quantitative method for comprehensive evaluation of tobacco stem usability.

参考文献 (17) 相关文章 (4)