• 烟草生物技术      • 加热卷烟      • 雪茄烟      • 香精香料      • 烟草化学      • 烟草加工工艺      • 烟草产品检验     • 烟草工业·仪器与设备     • 烟草原料、辅助物料     • 烟草工业副产品

赖炜扬, 付丽丽, 张柯, 等. 纤维吸湿特性与加热卷烟专用再造烟叶涂布性能适配性研究[J]. 轻工学报, 2023, 38(3): 63-72. 
LAI W Y, FU L L, ZHANG K, et al. Investigation on moisture adsorption properties of fibers and their application in evaluating the coating performance of reconstituted tobacco for heated toboacco products[J]. Journal of Light Industry, 2023, 38(3): 63-72.

张柯, 付丽丽, 王诗雨, 等. 低氧加热状态下温度对加热卷烟用再造烟叶热转化的影响[J]. 轻工学报, 2023, 38(3): 73-80. 
ZHANG K, FU L L, WANG S Y, et al. Effect of temperature on pyrolysis characteristic of reconstituted tobacco for heated tobacco products under low-oxygen heating condition[J]. Journal of Light Industry, 2023, 38(3): 73-80.

崔华鹏, 孟璠, 陈黎, 等. 滤嘴通风对加热卷烟气溶胶物理特性及其温度的影响[J]. 轻工学报, 2023, 38(3): 81-86. 
CUI H P, MENG F, CHEN L, et al. Effects of filter ventilation on physical properties and temperature of aerosol in heated tobacco products[J]. Journal of Light Industry, 2023, 38(3): 81-86.

吴键, 陈震, 黄峰, 等. 加热卷烟叶丝等温热失重及关键成分释放特性分析[J]. 轻工学报, 2023, 38(3): 87-93,111. 
WU J, CHEN Z, HUANG F, et al. Isothermal thermogravimetric and release characteristics of key components from cut tobacco of heated tobacco products[J]. Journal of Light Industry, 2023, 38(3): 87-93,111.

张贾宝, 王轶群, 梁淼, 等. 加热卷烟烟叶原料低温热解特性及其与感官品质相关性分析[J]. 轻工学报, 2023, 38(3): 94-101. 
ZHANG J B, WANG Y Q, LIANG M, et al. Low temperature pyrolysis characteristics of heated tobacco raw materials and its correlation with sensory quality[J]. Journal of Light Industry, 2023, 38(3): 94-101.

陈崇文, 蔡君兰, 操吉学, 等. 实际加香方式下13种正构烷烃类化合物在加热卷烟中的转移行为[J]. 轻工学报, 2023, 38(3): 102-111. 
CHEN C W, CAI J L, CAO J X, et al. The transfer behavior of 13 n-alkanes in heated tobacco products under actual fragrance method[J]. Journal of Light Industry, 2023, 38(3): 102-111.

汪刚, 王雨青, 肖翠翠, 等. 基于接触角法的加热卷烟纸防渗透能力评价研究[J]. 轻工学报, 2023, 38(3): 112-118. 
WANG G, WANG Y Q, XIAO C C, et al. Evaluation method for impermeability of heated tobacco paper based on contact angle method[J]. Journal of Light Industry, 2023, 38(3): 112-118.

唐伟, 陈昆, 陈佳琦, 等. 基于热流分析法的加热卷烟烟具能耗控制研究[J]. 轻工学报, 2023, 38(3): 119-126.  
TANG W, CHEN K, CHEN J Q, et al. Research on efficient heat utilization of heated tobacco device based on heat flow analysis method[J]. Journal of Light Industry, 2023, 38(3): 119-126.

陈芝飞, 陈泽少, 罗灿选, 等. 加热卷烟气溶胶中6种酯类单体香料转移行为研究[J]. 轻工学报, 2022, 37(3): 58-64. 

司晓喜, 崔华鹏, 朱瑞芝, 等. 不同GL/PG质量比和添加总量对加热卷烟气溶胶逐口释放特性的影响[J]. 轻工学报, 2022, 37(2): 78-86. 

崔华鹏, 陈黎, 樊美娟, 等. 电加热卷烟气溶胶物理特性的表征[J]. 轻工学报, 2022, 37(2): 87-93,101. 

李朝建,饶先立,郑晓云,等. 不同工艺制备的加热卷烟烟草薄片热失重行为研究[ J]. 轻工学报,2022,37 (1):55-61.

司晓喜, 张凤梅, 朱瑞芝, 等. 6种香料在加热条件下的释放迁移及对气溶胶理化特性的影响[J]. 轻工学报, 2021, 36(5): 67-75.