• 烟草生物技术      • 加热卷烟      • 雪茄烟      • 香精香料      • 烟草化学      • 烟草加工工艺      • 烟草产品检验     • 烟草工业·仪器与设备     • 烟草原料、辅助物料     • 烟草工业副产品

曾强, 阙文豪, 许璧麟, 等. 薄板烘丝机筒内结垢程度对设备工艺性能的影响[J]. 轻工学报, 2025, 40(1): 58-63.  
ZENG Q, QUE W H, XU B L, et al. Impact of fouling in the thin-plate cut tobacco dryer on equipment process performance[J]. Journal of Light Industry, 2025, 40(1): 58-63.

许克静, 刘语煊, 张展, 等. 辊压法全烟梗再造烟叶的制备工艺优化及结构与性能分析[J]. 轻工学报, 2025, 40(1): 64-74.  
XU K J, LIU Y X, ZHANG Z, et al. Optimization of preparation process and analysis of structure and performance of rolled reconstituted tobacco based on whole tobacco stem[J]. Journal of Light Industry, 2025, 40(1): 64-74.

游敏, 付金存, 王远, 等. 烟丝形态特性与细支卷烟填充密度均匀性关系研究[J]. 轻工学报, 2025, 40(1): 75-81.  
YOU M, FU J C, WANG Y, et al. Study on the relationships between morphological characteristics of cut tobacco and the uniformity of the filling density of slim cigarettes[J]. Journal of Light Industry, 2025, 40(1): 75-81.

冯永新, 崔英, 李科都, 等. 打辊工艺对翠碧一号上部烟叶打叶质量和出片率的影响[J]. 轻工学报, 2025, 40(1): 82-89.  
FENG Y X, CUI Y, LI K D, et al. Influence of rotational speeds of threshing drum on threshing quality and strips yield of upper leaves of flue-cured tobacco CB-1[J]. Journal of Light Industry, 2025, 40(1): 82-89.

楚文娟, 郭丽霞, 程东旭, 等. 基于K-means聚类及模糊判别的卷烟包灰性能综合评价方法[J]. 轻工学报, 2024, 39(6): 93-100.  
CHU W J, GUO L X, CHENG D X, et al. Comprehensive evaluation method for ash characterization of burning cigarette based on K-means clustering and fuzzy discrimination[J]. Journal of Light Industry, 2024, 39(6): 93-100.

卢晓波, 徐海, 朱俊召, 等. 基于机器视觉的加热卷烟烟支端部质量检测系统设计[J]. 轻工学报, 2024, 39(6): 101-107,115.  
LU X B, XU H, ZHU J Z, et al. Design of a quality inspection system for heated cigarette ends based on machine vision[J]. Journal of Light Industry, 2024, 39(6): 101-107,115.

陈昆, 黄福利, 吴承澄, 等. 高发射率发热针对加热卷烟温度及气溶胶释放的影响[J]. 轻工学报, 2024, 39(6): 108-115. 
CHEN K, HUANG F L, WU C C, et al. The impact of high-emissivity heating pins on temperature and aerosol emission in heated tobacco products[J]. Journal of Light Industry, 2024, 39(6): 108-115.

黄朵朵, 王乐, 雷萍, 等. 基于烟芯段和滤嘴段耦合的加热卷烟烟气关键成分释放模型构建[J]. 轻工学报, 2024, 39(6): 116-126.  
HUANG D D, WANG L, LEI P, et al. Modeling the release of key components of heated cigarette smoke based on the coupling of tobacco rod section and filter section[J]. Journal of Light Industry, 2024, 39(6): 116-126.

费致根, 鲁豪, 宋晓晓, 等. 基于改进ResNet网络的烟丝输送带洁净度分类模型[J]. 轻工学报, 2024, 39(5): 71-77. 
FEI Z G, LU H, SONG X X, et al. Cleanliness classification model for tobacco conveyor belt based on an improved residual network[J]. Journal of Light Industry, 2024, 39(5): 71-77.

 张伟伟, 姬远鹏, 元春波, 等. 基于改进Mask R-CNN模型的粘连烟丝识别方法[J]. 轻工学报, 2024, 39(5): 78-85.
ZHANG W W, JI Y P, YUAN C B, et al. Adhesive tobacco shreds recognition method based on improved Mask R-CNN model[J]. Journal of Light Industry, 2024, 39(5): 78-85.

张建栋, 杨忠泮, 吴恋恋, 等. 基于高光谱成像及机器学习的烟叶糖料液施加量判别模型[J]. 轻工学报, 2024, 39(5): 86-94.  
ZHANG J D, YANG Z P, WU L L, et al. Discrimination model of tobacco leaf sucrose solution application levels based on hyperspectral imaging and machine learning[J]. Journal of Light Industry, 2024, 39(5): 86-94.

吴晓东, 刘畅, 李俊, 等. 基于高光谱检测的烟丝加香均匀性表征方法[J]. 轻工学报, 2024, 39(5): 95-101. 
WU X D, LIU C, LI J, et al. Characterizing flavoring uniformity in tobacco based on hyperspectral detection[J]. Journal of Light Industry, 2024, 39(5): 95-101.

唐习书, 田德兴, 方瑞萍, 等. 卷烟制造过程梗签分离工艺及装备研究进展[J]. 轻工学报, 2024, 39(4): 109-117. 
TANG X S, TIAN D X, FANG R P, et al. Research progress on stem sliver separation process and equipment in cigarette manufacturing[J]. Journal of Light Industry, 2024, 39(4): 109-117.

朱亚昆, 梅吉帆, 郭文孟, 等. 基于PPF投影算法和高光谱技术的卷烟牌号识别模型[J]. 轻工学报, 2024, 39(4): 118-126. 
ZHU Y K, MEI J F, GUO W M, et al. Cigarette brand identification model based on PPF projection algorithm and hyperspectral technology[J]. Journal of Light Industry, 2024, 39(4): 118-126.

郭华诚, 胡仙妹, 高尊华, 等. 针辊式烟丝结构调控设备参数变化对细支烟卷制品质的影响[J]. 轻工学报, 2024, 39(2): 122-126.  
GUO H C, HU X M, GAO Z H, et al. Influences of the pin-roll tobacco structure control equipment parameters on the rolling quality of slim cigarette[J]. Journal of Light Industry, 2024, 39(2): 122-126.

李晓, 郭朋玮, 周茂忠, 等. 烟丝物理指标对其回弹特性的影响研究[J]. 轻工学报, 2024, 39(1): 97-102.
LI X, GUO P W, ZHOU M Z, et al. Research on the influence of physical indicators of cut tobacco on its rebound characteristics[J]. Journal of Light Industry, 2024, 39(1): 97-102.

李锦, 罗冲, 闫瑛, 等. 基于Kriging模型的造纸法再造烟叶筛分工艺参数优化方法[J]. 轻工学报, 2024, 39(1): 103-108.
LI J, LUO C , YAN Y, et al. Optimization of sieving process parameters for paper-based reconstituted tobacco based on Kriging model[J]. Journal of Light Industry, 2024, 39(1): 103-108.

杨光露, 鲁晓平, 李琪, 等. 基于改进轻量化YOLOv5s的卷烟厂烟草粉螟视觉检测方法[J]. 轻工学报, 2023, 38(6): 102-109.
YANG G L, LU X P, LI Q, et al. Visual detection method of tobacco moth in cigarette factory based on improved lightweight YOLOv5s[J]. Journal of Light Industry, 2023, 38(6): 102-109.

李善莲, 安佳敏, 刘朝贤, 等. 基于自编码器和PCA的滚筒烘丝机多块过程监测方法[J]. 轻工学报, 2023, 38(6): 110-117.
LI S L, AN J M, LIU C X, et al. Multi block process monitoring method of drum dryer based on autoencoder and PCA[J]. Journal of Light Industry, 2023, 38(6): 110-117.

王金棒, 池哲翔, 李源源, 等. 烟草在燃料制备领域的研究现状与展望[J]. 轻工学报, 2023, 38(6): 118-126.
WANG J B, CHI Z X, LI Y Y, et al. Research status and prospects of tobacco in the field of fuel preparation[J]. Journal of Light Industry, 2023, 38(6): 118-126.

付永民, 范磊, 李长进, 等. 基于BP神经网络的烟草制丝工艺参数优化研究[J]. 轻工学报, 2023, 38(5): 104-111.
FU Y M, FAN L, LI C J and et al. Research on optimization of tobacco silk processing parameters based on BP neural network[J]. Journal of Light Industry, 2023, 38(5): 104-111.

唐小雪, 潘连华, 黄宇亮, 等. 卷烟纸参数对中支卷烟常规烟气成分释放量及其符合度的影响[J]. 轻工学报, 2023, 38(2): 102-109.
TANG X X, PAN L H, HUANG Y L, et al. The influence of cigarette paper parameters on the release of routine smoke components of demi-slim cigarettes and their conformity[J]. Journal of Light Industry, 2023, 38(2): 102-109.

楚文娟, 朱鑫超, 王高杰, 等. 贮存环境对甜味接装纸中纽甜衰减行为的影响[J]. 轻工学报, 2022, 37(5): 69-75.

万纪强, 胡少东, 崔春, 等. 空腔直径对圆形空腔滤棒卷烟烟气及感官品质的影响[J]. 轻工学报, 2022, 37(4): 81-85,93.

楚文娟, 纪朋, 韩路, 等. 滤嘴参数对细支烟主要理化指标及感官品质的影响[J]. 轻工学报, 2022, 37(3): 65-73.

程向红, 刘强, 王根发, 等. 不同干燥强度对香料烟叶丝质量的影响[J]. 轻工学报, 2022, 37(2): 59-64.

唐军, 何邦华, 易斌, 等. 国内卷烟加工过程烟草异物除杂技术研究进展[J]. 轻工学报, 2022, 37(2): 94-101.

王鹏飞,李全胜,陈孟起, 等. 微波膨胀烟梗制丝关键工艺参数对梗丝加工质量的影响[J]. 轻工学报, 2021, 36(6): 55-64.

郭华诚, 陈康, 张峻松, 等. 不同干燥模式对细支烟烟丝结构、卷制质量及主流烟气成分的影响[J]. 轻工学报, 2021, 36(4): 45-50. 

徐德龙, 米强, 付立伟, 等. 基于烟丝填充值提升的滚筒干燥工艺参数优化[J]. 轻工学报, 2021, 36(1): 45-50.

唐军, 何邦华, 温亚东, 等. 国内细支卷烟加工工艺与加工装备研究进展[J]. 轻工学报, 2020, 35(6): 41-49.

喻森, 杨涛, 徐兴阳, 等. 环境湿度对卷烟抽吸品质的影响研究[J]. 轻工学报, 2020, 35(5): 33-40.

瞿先中, 张劲, 蒋士盛, 等. 外形尺寸对造纸法再造烟叶品质特性的影响[J]. 轻工学报, 2020, 35(5): 26-32.

崔春, 楚文娟, 田海英, 等. 打孔方式对细支卷烟滤嘴通风率及感官品质的影响[J]. 轻工学报, 2020, 35(4): 40-45.

王茹楠, 李晓瑜, 田泱源, 等. 再造烟叶生产过程中存贮条件对浓缩液品质的影响[J]. 轻工学报, 2020, 35(2): 42-49.

韩路, 田海英, 楚文娟, 等. 卷烟纸参数对细支卷烟燃烧锥落头倾向的影响[J]. 轻工学报, 2020, 35(1): 79-84,94.

胡少东, 楚文娟, 鲁平, 等. 成形纸透气度、接装纸透气度和打孔排数对卷烟滤嘴通风率的影响[J]. 轻工学报, 2020, 35(1): 85-94. 

邬帅帆, 陆诚玮, 崔秀明, 等. 烟草挥发物的水蒸气蒸馏制备工艺及其在电子烟中的应用研究[J]. 轻工学报, 2020, 35(1): 72-78.